| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 2 x | Release wax 250ml |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Oracover Green10 m |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | White smoke canister 100 g |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | 3l Smoke oil |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Short ball link M2 (6 uds) |
| 1 x | Glases Moritz |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Crimping tool |
| 1 x | Glases Aspen |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | 15 mm reinforced hinge |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Glases Nimbus |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | 25 mm reinforced hinge |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Futaba Female 40 cm extension |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Ball Link Plier |
| 1 x | Towing hook |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Angle measurer |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Parachute XTRALITE S |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | Oracover White 2 m |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Glases Innovation Plus |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Extra long horn 60x30 |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | BEC 3A FOXY |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 03 |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | 20 g tin paste |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Partall paste 650 g |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Bungee HLG Premium |
| 1 x | EasyFLY Addon |
| 1 x | Oratex Silver 2m |
| 1 x | Oracover Red 2 m |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Oracover Verde 2 m |
| 1 x | Ply-Span 450x600/13g Yellow |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Oratex Natural White 2m |
| 1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | Oracover GREY Seafire Sea 2m |
| 1 x | Interface Realflight Simulator |
| 1 x | Oratex White 2m |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | Oracover Azul 2 m |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Oracover Yellow CADMIO 10 m |
| 1 x | Oracover White 10 m |
| 1 x | Oracover Black 10 m |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Tape GFK 50 mm |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Red smoke canister 65 g |
| 1 x | Futaba male 40 cm extension |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Smoke set "M" |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Connector CAN 15 |
| 1 x | Glases Stratus |
| 1 x | Bag connector 2 mm |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Premium servo extension 100cm |
| 1 x | Smoke set "S" |
| 1 x | Blue smoke canister 100 g |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Parachute expulsion foam |
| 2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Conector JR Servo male (50 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Red smoke canister 140 g |
| 1 x | "S" set for boats |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Canopy Latch |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Red smoke canister 100 g |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | 140 mm rods set for direction control |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Glases Flitemaster |
| 1 x | Blue smoke canister 140 g |
| 1 x | White smoke canister 140 g |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | 30 cm DEANS female connector |
| 1 x | Adjustable launching hook |
| 1 x | HBC 10035-3 32-Bit |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | White smoke canister 65 g |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Premium servo extension 75cm |
| 1 x | Cable control set |
| 1 x | 6 mm M3 variable horn |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Dean-T Plug Mold |
| 1 x | Premium servo extension 25cm |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Futaba Female 40 cm extension |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Long ball link M2 (6 uds) |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Horn with ball 40x30 |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
 |
| 8,900.72EUR |
few units
temporarily out of stock
under request
