| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | 127x43 Ø6.0 mm aluminium core wheel |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 2 x | CC 02 |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | |
| 3 x | 800TVL CMOS camera for FPV |
| 2 x | Adapter lead MPX/XT60 |
| 1 x | 10 mm gas motor standoff |
| 2 x | 5 LiPo XH>EH adapter |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | 25 mm reinforced hinge |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | LOWER TOW HOOK |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Interface Realflight Simulator |
| 1 x | Oracover Orange 2 m |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Canopy Latch |
| 1 x | Oracover Verde 2 m |
| 1 x | Oratex Silver 2m |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Oracover GREY Seafire Sea 2m |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Oracover CHROME 2m |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Oratex Natural White 20m |
| 1 x | Oracover Green10 m |
| 1 x | EasyFLY Addon |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | FESTO connector M5 Quick 6 mm |
| 1 x | FESTO connector M7 barb fitting XL Tygon |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | 550 cc gasoline fuel tank complet |
| 1 x | Parachute PV6 for F3J |
| 1 x | DPSI RV Mini 6 (2008) |
| 1 x | DPSI Micro MPS |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Extension 5 lipos JST/C |
| 1 x | Female connector for 10 pines AWG |
| 1 x | CC 03 |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 2 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Micro Switch button |
| 2 x | SPARK Switch 12v |
| 1 x | USB HLS prog. interface |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | SPS 70V 100/200 A |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 2 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | Gates hinge |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Switch magnet for gas cap and magnet switch actuators |
| 1 x | DPSI 2001 RV |
| 2 x | Jeti Black cap |
| 1 x | DPSI OCP Overload protection |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | CORTEX |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | JETImodel Addcap 1640 |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Interruptor SPS 70v 60/120A |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | DPSI Ampere battery backer |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Extension 5 lipos JST/C - JST |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | JETImodel DPS 40 |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | FX three-position switched channel, long |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | BEC 3A FOXY |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | bavarianDEMON USB cable |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | CM-3 |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Long Switch On/Off micro |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | EWC3 100 cm wing connector |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | CC 01 |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Cabel charger transmitter GRAUPNER |
| 2 x | BALSA triangular 6x6x1000 mm |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Connector CAN 15 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | SBEC 30 D |
| 1 x | MAX BEC 2 |
| 2 x | SBEC 40 |
| 1 x | SPARK Switch 5.9v |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Bags de Luxe ASPIRE |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | MAX BEC 2D plus EX |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Short Switch On/Off micro |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | SPS Remote switch actuator |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
 |
| 5,529.76EUR |
