| 2 x | Blade Holder Full (4 blades) |
| 2 x | Fuselage Autogyro RAINBOW |
| 1 x | Tail tube RAINBOW |
| 2 x | 4 blades set |
| 1 x | LA500 cyclic central part |
| 1 x | Rudder |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | 36,0 mm propeller (rigth propeller) |
| 1 x | 290 mm 290 mm M5x18 mm shaft ship |
| 1 x | 42,0 mm propeller (rigth propeller) |
| 1 x | Oracover Red 2 m |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Oracover Green10 m |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 2 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Xplorer4 anemometro |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Stickers-digit for marking |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Oracover White 10 m |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 2 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Xplorer1 anemometro |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 2 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | Oracover Yellow CADMIO 10 m |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Oracover White 2 m |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Oracover Orange 2 m |
| 1 x | TrainerCord (master-learner) |
| 1 x | BEC 3A FOXY |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | |
| 1 x | Complet landing gear |
| 1 x | Ball joint long |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Raer wall |
| 1 x | Head lower part |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | 3 blades set |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Fixed launching hook |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | 10 mm dogdrive props |
| 1 x | 14 mm portholes (10 pcs) |
| 1 x | 12 mm mast holder |
| 1 x | 290 mm M5 Prop shaft |
| 1 x | 39,0 mm propeller (left propeller) |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
| 1 x | 31,0 mm propeller (rigth propeller) |
| 1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | CC 02 |
| 2 x | CC 05 |
| 3 x | CM-3 |
| 2 x | TMM 2512-3S heli |
| 2 x | USBCOM 5i |
| 3 x | TMM 1210-3S heli |
| 1 x | CC 11 Conector |
| 3 x | PSC 5 |
| 2 x | PSC 6 |
| 3 x | CC 03 |
| 1 x | Parachute XTRALITE S |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | Frontal support Speed 600 |
| 1 x | Indoor motor holder |
| 1 x | Motor mount M |
| 1 x | BlueCom™ Adapter (iOS) |
| 1 x | Battlife Guard 2s |
| 1 x | PowerBox 12 |
| 1 x | Bags de Luxe ULTIMATUM 2.0 |
| 1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
| 1 x | Motor holder AXI |
| 1 x | Cooler motor type 300 |
| 1 x | Frontal support Speed 400/480 |
| 1 x | Blade Holder (3 blades) |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | Cooler motor type 280 |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Fan for A60 |
| 1 x | Receiver bed (Blue) |
| 1 x | Motor mount for 1 m models |
| 1 x | Powerset FunJet 2 with Vectorcontrol unit |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Oratex Natural White 20m |
| 2 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | SIG Coverall 1.2x0.9 m |
| 1 x | Propeller Pleg CAM Carbon 10x5 |
| 1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
| 1 x | Propeller CFK 15x13 Slim |
| 1 x | LOWER TOW HOOK |
| 2 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Towing hook <3m |
| 1 x | Stick coupler Ms 15 mm |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | Mounting base Ms 12 mm |
| 1 x | Central support Speed 280 |
| 1 x | PowerBox DigiSwitch V2 JR/JR |
| 1 x | PowerBox iGyro SRS + GPS Modul |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 1 x | Propeller Pleg CAM Carbon 12x10 |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Oratex Antik 2m |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Festo Adaptor Tygon Large/4mm |
| 2 x | Ferrita 27x14x7 mm |
| 1 x | Propeller CFK 16x17 |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Conector FESTO G1/8 Quick 4mm 90º |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | FESTO connector M7 barb fitting 6mm |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 3 x | CC 01 |
| 1 x | Propeller Pleg CAM Carbon 13x8 |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Ply-Span 450x600/13g Black |
| 1 x | Tape GFK 25 mm |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | FESTO connector M7 Quick 4 mm |
| 1 x | Propeller Pleg CAM Carbon 13x10 |
| 1 x | Battery charging cable XT60 |
| 1 x | Propeller CFK 16x13 |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | |
| 1 x | Quick hose connector 4-3 mm |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | PVC transparent battery termo-retract 85 mm (1 m) |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Propeller Pleg CAM Carbon 12x9 |
| 1 x | Tape GFK 38 mm |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | USB programador GO servos |
| 1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Optical RPM Sensor |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Propeller CFK 14x7 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | 4,8x1000 mm 2:1 black termoretract tube |
| 1 x | Propeller Pleg CAM Carbon 10x4 |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
| 1 x | Ancla 40 x 24 mm (2 pcs) |
| 2 x | Sheave Pl. 2R. 12 mm |
| 2 x | Bocina 30 mm (1 pcs) |
| 1 x | Mounting single stop Ms 10 mm |
| 1 x | Ancla Hist. 67 mm (2 uds) |
| 1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
| 1 x | Plastic fan 12x35 mm (3 pcs) |
| 1 x | Life guard Ø 35,0 mm (2 pcs) |
| 1 x | wooden stairs (kit) 70 mm |
| 1 x | Coupling for 3,2 mm axis |
| 1 x | Wood anchor 30 mm (2 uds) |
| 1 x | Soporte barandilla madera 8 mm (10 pcs) |
| 1 x | Propeller 3BL 50 mm M4 Plastic |
| 1 x | Sheave Pl. 2R. 3 mm |
| 1 x | Coupling for 4 mm axis |
| 1 x | Life guard Ø 25,0 mm (2 pcs) |
| 1 x | Koffeenagel Holz hell 8 mm (20 pcs) |
| 1 x | Sheave Pl. 1R. 5 mm |
| 1 x | HBC 10035-3 32-Bit |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 2 x | Propeller 3BL 30 mm M4 plastic Right |
| 1 x | Soporte barandilla madera 16 mm (10 pcs) |
| 1 x | Housing Ø 6 mm (20 pcs) |
| 1 x | Coupling for 2,3 mm axis |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | Propeller 3BL 35 mm M4 plastic Left |
| 1 x | Coupling for 5 mm axis |
| 1 x | Housing Ø 4 mm (2 pcs) |
| 1 x | Housing Ø 15 mm (20 pcs) |
| 1 x | Coupling for 3 mm axis |
| 1 x | Mounting base Ms 8 mm |
| 1 x | Housing Ø 11 mm (20 pcs) |
| 1 x | Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück |
| 1 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
| 1 x | Railing 5x100 mm |
| 1 x | ESC Actro-Marine 30A |
| 1 x | Fan metalic 21 mm |
| 1 x | Soporte barandilla madera 10 mm (10 pcs) |
| 1 x | Picas 12 mm (20 pcs) |
 |
| 9,081.71EUR |
