1 x | Digital precision scale up to 2000 g |
2 x | Dust collector for mould cleaning |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Cut tube |
1 x | Z Bender - S Type Tool |
2 x | Hot Glue Stick RED |
2 x | Vacuum pump P1-N |
1 x | 1,5x50 mm allen screwdriver |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Z Bender - S Type Tool |
1 x | |
2 x | 2,0x50 mm allen screwdriver |
2 x | Crimping tool |
1 x | 3,0x60 mm allen screwdriver |
1 x | Screwdriver for Torx® TX8 |
3 x | Vacuum pump 12 CFM |
2 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
2 x | Starter EM Gear Power 80 |
2 x | Starter 12v (Max 90 and 15ccm) |
1 x | Starter EM Gear Power 250 |
3 x | Starter Sullivan-STAR 603 DINATRON |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | Copier 5x20 cm pcs |
3 x | Starter 12v (Max 180 and 30ccm) |
2 x | Screwdriver for Hexagon 1,5mm |
1 x | 2,5x60 mm allen screwdriver |
3 x | Starter Sullivan-STAR 601 |
1 x | Crimping tool |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
3 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Ply-Span 450x600/13g Orange |
1 x | Universal Colour Paste deep black 250 g |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Covered closure or fairings |
2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Roller cutter 28 mm |
2 x | Spare round blades, 28 mm, pack/ 2 pcs. |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
2 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | T- Fittings red color (2pcs) |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Sparkplug DLE CM6 |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | T-Hose connector 3-3-3 mm |
1 x | O-ring Saito FG-73 5cyl |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Quick hose connector 4-3 mm |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | FESTO connector M7 barb fitting XL Tygon |
2 x | Fuel Fittings-Red |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Tube Pitot to PIXHAWK |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | Sparkplug 1/4-32 |
1 x | Foam plastic plates (310x210x3 mm) |
2 x | Glass fabric 25 g (2 m²) |
1 x | Support 45% Hopper JetsMunt |
2 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Fuel tank 500ml (17oz) |
1 x | T-Hose connector 4-4-4mm |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | Fuel Fittings-Gold |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | 18 mm reinforced hinge |
1 x | Small pinned hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | 15 mm reinforced hinge |
1 x | Long pinned hinge (6 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Miniature brass strap hinge, 1 m |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Propeller diller for DA50, DLE55 red |
2 x | Steel brush wheel with 2.35mm |
1 x | Mold plugs XT-30 |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
2 x | Schul-Malpinsel Gr.5 |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Mini Infrared Thermomiter |
1 x | 25 mm reinforced hinge |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 700 ml complete glow fuel tank |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Digital weight, angle and balance meter BASIC |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Long pinned hinge (12 uds) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Copier 2x20 cm pcs |
2 x | Screwdriver for Hexagon 1,27mm |
1 x | Tygon tube 4.8 x 3.2 mm 1m |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Spring Clip Ø25 mm |
1 x | 500 ccm complete gasoline fuel tank |
2 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | KWIKFILL FUELING VALVE GLOW |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Sparkplug NGK CM6 |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
2 x | Foam plastic plates (310x210x5 mm) |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Double side nipple |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | 280 cc gasoline fuel tank complet |
1 x | Neoprene tube 7,5x3,5 mm (1 m) |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | Quick hose connector 6-4 mm |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Round flex hinge (12 uds) |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Small pinned hinge (6 uds) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Spark motor OS nº 3 |
1 x | Chopped glass fibre strands 3 mm |
1 x | 550 cc gasoline fuel tank complet |
1 x | FUELING VALVE GASOLINE LARGE (1PC) |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | |
1 x | Sealing Iron STANDARD |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Ball Link Plier |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Digital scale up to 40 kg |
1 x | Screwdriver for Torx® TX6 |
1 x | Sandpaper file 13 mm |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Sub-D Plug Mold |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Ball Link Plier |
1 x | Sealing Iron Sleeve PROF |
1 x | PT 16x10 E Propeller |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
|
12,153.44EUR |