1 x | Ventus 1:4 set of instruments |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Jeti Black cap |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
3 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | ABS tube 4.0x3.0x1000 mm |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
3 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ABS tube 3.0x2.0x330 mm |
3 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Propeller POWER-PROP 14x9 Izda |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Propeller POWER-PROP 13x9 |
1 x | Round Rod 5,0x1000 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | 15 mm reinforced hinge |
1 x | Round Rod 1,25x1000 mm |
1 x | Long pinned hinge (12 uds) |
1 x | Round Rod 6,0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Round Rod 4,0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Gates hinge |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Miniature brass strap hinge, 1 m |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Strip 2,0x2,0x330 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | One touch canopy lock |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Canopy Latch |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Cockpit plastic closing |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | MAX pilot ARTF |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Ball link M2,5 (10 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Snap long M2 (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Covered closure or fairings |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | MZ-12, 6 Channel HoTT |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
2 x | Spinner NUT M6 |
1 x | Distanzstück motor OS 120 AX |
1 x | Mobile Terminal |
2 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | MZ-18, 9 Channel HoTT |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Hose clips 6 mm |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | ProgBOX MASTER Hacker |
1 x | MZ-10, 5 Channel HoTT |
1 x | Spinner NUT M4 |
1 x | Kontronik ProgUnit |
1 x | Spinner NUT 1/4x28 |
1 x | Small pinned hinge (6 uds) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | 80 mm rods set for direction control |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Control for forward wheel (MINI) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Interface Jack Adapter IKARUS |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Fiberglass tube 6/4x1000mm |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Hovercraft sailcloth |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Tren electrico JP ER-005-V2 Mini AVANTI (Sebart) |
1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
1 x | Propeller G-Sonic 20x8 |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Spinner NUT M5 |
1 x | ESC YGE 120 LVK |
1 x | Tren electrico JP ER200 F-16 1:6 TOPRC |
1 x | TMM 2512-3S heli |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Spinner 42 mm EXTRA 330SC |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Cockpit metalic closing |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | 45 mm rods set for direction control |
1 x | 13 mm wing servo holder |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Clip fixing for wing (2 pcs) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | Snap for floding prop for 2 mm axi |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Bidule 111 3000 mm Canopy |
1 x | Astra wing Joinner (Top Model) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | EasyFLY Addon |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Metalic nose for PROJETI |
1 x | 25 mm reinforced hinge |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
|
7,946.85EUR |