1 x | Ventus 1:4 set of instruments |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Cable with accesories |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Horn for flap control (1 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn with ball 55x40 |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Cable control set |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
3 x | Horn 6/35 with M3 Bearing |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
4 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn with ball 40x30 |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 30 cm DEANS female connector |
1 x | Windsock Ozone L - 700 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | 20 mm carbon horn |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Screw M3x5 (10 pcs) |
1 x | Screw M3x8(10 pcs) |
1 x | Long horn 50x26 |
1 x | Pan Head Screw M2x8 PH |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Screw M4x20 (10 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
2 x | Brass control horn M2 large for wire (2pcs) |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
2 x | 300x4 mm M4 shaft ship |
2 x | 3,2 mm Prop Adapter M8 |
1 x | 6 mm aluminium horn with patella |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Long adjustable control horn 3x34 |
2 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Nut for mounting M3 (10 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horns indoor |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | 6 mm M3 variable horn |
1 x | Long adjustable control horn with bearing |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Reed valve for DA 50-R |
1 x | Extension Arm for Carburetor (red) |
1 x | Sparkplug 1/4-32 Glow |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Charger SKY RC D200 neo |
1 x | Charger SKY RC e680 |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | SKY RC Temperature Sensor |
2 x | 2,3 mm Prop Adapter M6 |
1 x | Propeller POWER-PROP 12x6 |
1 x | Propeller POWER-PROP 14x8 |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Allen wheel collar M4x4 |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | 10x7 tree blades propeller |
1 x | 15x7 tree blades propeller |
1 x | 1000 ml sealer (DOPE) |
1 x | Servo HITEC HS-225 BB |
1 x | Servo HITEC D950 TW |
1 x | Gear set HITEC HS-56 HB |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Servo HITEC D131 MW nano |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | FIALA Propeller 24x12 |
1 x | Propeller MASTER 6x3,5 |
1 x | Propeller POWER-PROP 16x10 |
1 x | Propeller POWER-PROP 16x8 |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | DUPLEX 2.4 EX MBar |
1 x | Extra long horn 60x30 |
1 x | Adapter 3,0 mm M8 |
1 x | XTorque CFK Servohebel 38 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Hitec 52 mm servo arm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Hitec 38 mm servo arm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Vertical mounting servo holder |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Hitec 30 mm servo rounded arm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | 10 mm dogdrive props |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 2 mm Prop Adapter M6 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | 25 mm fenders (10 pcs) |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3 mm Leader (L 100 mm) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | 12 mm portholes (10 pcs) |
1 x | 28 mm turnbuckle |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 12 mm mast holder |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Servo HITEC D645 MW |
1 x | Servo HITEC HS-5585MH |
1 x | Servo HITEC D951 TW |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | HITEC DPC-11 programmer |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Gear set HITEC HS-85 |
1 x | Servo HITEC D941 TW |
1 x | Gear set HITEC HS-65 HB |
1 x | Gear set HITEC HS-225 |
1 x | Servo HITEC HS-225 MG |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | Gear set HITEC HS-55 |
1 x | Gear set HITEC HS-81 |
1 x | Servo HITEC HS-311 |
1 x | Gear set HITEC D645 MW |
1 x | Servo HITEC D625 MW |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gear set HITEC HS-7950TH |
1 x | Servo HITEC D145 SW |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC D85 MG |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Micro control horn T2 Ø 1 |
1 x | FIALA Propeller 22x10 |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
|
3,911.55EUR |