1 x | Parachute BACKUP X100 |
2 x | Wing OXY 5,0 m2 |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Opale Rucksack |
2 x | Para-RC Mix |
2 x | Trike XL motor set (motor+esc+prop) |
2 x | LUCAS pilot ARTF |
2 x | Towing hook |
2 x | 1/4 Pilot "Mike" |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | 4 LiPo XH>EH adapter |
1 x | ABS angle 1.5x1.5x1000 mm |
4 x | Ball link M3 (10 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Xplorer3 anemometro |
1 x | Round Rod 6,0x1000 mm |
3 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
3 x | Civilian pilot "G-Man" size 9cm (Slimline) |
2 x | XT-60 connector (female) |
1 x | Painting GHT Lexan Black 150 ml |
2 x | Piloto Jet "Green" 1/6 Scale |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 1/12 Pilot "Langley" |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 1000 ml sealer (DOPE) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
3 x | Joint with bearing M3 22x5,5 |
3 x | Quicklock washer 4 mm (10 pcs) |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Surface Indicator Gauge Small |
2 x | Pilot JAN 1/4 Saiplanes |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
3 x | PIX Hawk with accesories |
4 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
3 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | FOAM - CURE™ (24g) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
2 x | Tube Pitot to PIXHAWK |
2 x | Stickers-digit for marking |
4 x | Adjustable launching hook |
5 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | JETImodel SINGLE BEC |
1 x | Connectors DEANS (T) |
2 x | Solvent Plasti Dip 1000 ml |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | SIMtransmitter 6 Mode 2 |
3 x | Small pinned hinge (6 uds) |
2 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Flat washer 1.7 mm (20 pcs) |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Pilot "Goose" (Slimline) |
3 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | Ball link M1.6 (6 uds) |
2 x | Connectors banna oro 2 mm (M/F) |
3 x | Lock washer 3.2 mm (20 pcs) |
1 x | Conector Servo female 4 pines |
2 x | Extension silicon 50 cm (Futaba) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
3 x | 1/6 Pilot "Garry" |
1 x | Small flex hinge (12 uds) |
2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Aluminium wide washer M3 red (4 pcs) |
3 x | Short ball link M1.6 (6 uds) |
2 x | 30 cm DEANS female connector |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | Hobbylite Filler, Balsa colour |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Extension silicon 10 cm (Futaba) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Conector BEC female (10 pcs) |
1 x | Xplorer1 anemometro |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Field folding model stand |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Extension silicon 30 cm female (Futaba) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
3 x | 1/6 Pilot "Buddy" |
3 x | Medidor ángulos y/o incidencias |
3 x | Gates hinge aluminium (1 pcs) |
1 x | Vest clothes Hispano Aviación |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Universal Colour Paste deep black 250 g |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Ventus 1:4 set of instruments |
1 x | Futaba Female 40 cm extension |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
3 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Towing hook |
2 x | M3 black washers (4 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Pilot "Dick" Legends Series (Slimline) |
5 x | Ball link M3 RPA's-UAV's |
3 x | Carbon fiber rod 6.0 mmx1000 mm |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | MPX Sub-D Adaptor |
4 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Cabel charger transmitter GRAUPNER |
2 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Paint gun for sprays |
3 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Epoxy 5 min. 500 g (Resin) |
2 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Blind nut M3 (4 pcs) |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | DJI Mavic Air Fly More Combo |
3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
3 x | Carbon fiber rod 14 mmx1000 mm |
5 x | LED blink wire flashing (orange - 2pcs) |
2 x | Universal Colour Paste white 50 g |
2 x | Xplorer4 anemometro |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
2 x | wire tensioner (black) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
3 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Propeller balancer |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Hexagonal Nut M2.5 (10 pcs) |
2 x | Fiberglass plate 620x540x2,0 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | DIVA cabin cruiser |
3 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | 1/4 Pilot "Heidi" |
2 x | TrainerCord (master-learner) |
1 x | Spark motor OS nº 8 |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Axle for AXI 2212/xx motors |
2 x | Hexagonal Nut M4 (10 pcs) |
4 x | Ball link M2,5 (10 pcs) |
2 x | Hardener Aero EPH 161 (250 g) |
1 x | 25 mm reinforced hinge |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Pipa BULL MØ1 2.600mm |
2 x | Threaded insert M4 (4 pcs) |
2 x | VPP system propeller for AXI VPP motors (spare) |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Socket head long ball link M3 (6 uds) |
2 x | Nylon Screw M4x20 |
1 x | Sparkplug DLE CM6 |
1 x | PowerBox Signal Amplifier |
1 x | PowerBox MagSensor red connector |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
2 x | M3/5Diam metal ball link V3 (2 pcs) |
2 x | PowerBox iGyro SRS + GPS Modul |
2 x | Extension silicon 100 cm (Graupner) |
1 x | NF-3X-80 liner Kit |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | PVC grid diagonal 290x185x0.32 mm |
3 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Foam plastic plates (310x210x3 mm) |
2 x | XT-60 connector (male) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Long pinned hinge (12 uds) |
2 x | Pan Head Screw M2x8 PH |
4 x | LED blink wire flashing (green - 2pcs) |
1 x | Ball link M3 (6 uds) |
5 x | Blind nut M6 (4 pcs) |
2 x | Fiberglass plate 350x150x0.3 mm |
4 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | CC 01 |
2 x | 3.2 mm Prop Adapter M6 |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Buy Perforated film 145 cm / 50 m |
2 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | DLE 55 carburetor |
2 x | Hexagonal Nut M2 (10 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Reed valve for DA 50-R |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Socket Head Screw M2,5x12 |
3 x | Carbon plate 700x550x0.5 mm |
3 x | Micro flex hinge (12 uds) |
2 x | Spinner plastic red fixed propeller 30 mm |
1 x | SD HC 8 GB |
3 x | Hexagonal Nut M3 (10 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | 15 mm reinforced hinge |
2 x | Styrene plate 320x120x1.0 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
3 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Ferrita 14x8x5.5 mm |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
2 x | Flap hinge (6 pcs) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Prolongador S-Bus JR/JR 10cm |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Tank GFK Opus/JEt 300 ml |
2 x | wire tensioner (blue) |
1 x | 1/12 Pilot "Tom" |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
4 x | Tapping Screw M2.2x65 (10 pcs) |
3 x | 18 mm reinforced hinge |
1 x | Mudguard for 140/165 mm wheels |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Fiberglass plate 620x540x0,3 mm |
2 x | LED wire (green - 2pcs) |
6 x | LED blink wire flashing (white - 2pcs) |
7 x | LED wire (orange - 2pcs) |
2 x | LED blink wire flashing (red - 2pcs) |
3 x | LED wire (white - 2pcs) |
2 x | LED blink wire flashing (blue - 2pcs) |
4 x | LED lighting system High Power |
5 x | LED wire (blue - 2pcs) |
4 x | LED wire (rojo - 2pcs) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
5 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
3 x | Foam plastic plates (310x210x5 mm) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Motor DLE 40 cc Twin |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | 45 mm black plastic spinner for fixed propeller |
2 x | Fiberglass plate 620x540x3,2 mm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Servo HITEC HS-5084 MG |
3 x | Release film 100 cm x 50 m |
2 x | USB HLS prog. interface |
3 x | Indoor hinge with servo arm integraded |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Jeti Black cap |
3 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
3 x | Styrene plate 320x120x0.5 mm |
3 x | Futaba male 40 cm extension |
5 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | Optical RPM Sensor |
2 x | Ball Link Plier |
1 x | Carbon plate 350x150x1.5 mm |
2 x | Tank Kevlar ASPIRE 6 L Kero |
3 x | Vacuum bag, 1200 mm x 50 m |
2 x | Strip 2,5x1,25x330 mm |
4 x | Fiberglass plate 350x150x0.5 mm |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
2 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Neck strap JETI DS |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
2 x | Tow hook for tug |
2 x | Pulley brass 12/2 (2 pcs) |
2 x | Blind nut M6 (4 pcs) |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | Long ball link M1.6 (6 uds) |
2 x | M3-M4 rubber washer (8 pcs) |
2 x | Set clevis for pull-pull (TY13233 & TY13234) |
2 x | 1/12 Pilot "Fighter" |
1 x | Protector Connector MPX (1 pair) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Cabel "Y" 30 cm (Futaba) |
4 x | Fiberglass plate 620x540x0,2 mm |
2 x | DUPLEX 2.4EX MT 125 temperature sensor |
2 x | Fiberglass plate 350x150x2.0 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | MPX screwable clips (4 pcs) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | M3 Maxi ball link (2 uds) |
3 x | Flat washer 4.3 mm (20 pcs) |
2 x | Joint with bearing M2 22x5,5 |
1 x | Servo HITEC HS-645 MG |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Baseplate servo |
1 x | 500 ml sealer (DOPE) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Coupling bush 5 - 5 mm |
1 x | Cable coupler M3 (10 uds) |
2 x | M3 Maxi ball link (2 uds) |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Motor Advance 30-10 F3A |
1 x | DLE 111 Carb gasket (V1) |
1 x | DLE Ignition 111/120/170 |
3 x | Servo M2x9/16 screw (4 pcs) |
1 x | HITEC Power Supply 30A. Max. 540w |
2 x | Socket head ball link M3 (2 uds) |
1 x | Piston ring for DLE-20 RA |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | Bags de Luxe ODYSSEY |
1 x | Spinner 60 mm Black (Kavan) |
2 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | NF-3 RC set |
2 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | LiPo Storage Box Type "BIG" |
2 x | Crystal TX 35.180 Ch 78 |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Life guard Ø 17,0 mm (10 pcs) |
3 x | BlueCom™ Adapter (Android / WP) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Clamping slide 14mm (10 pcs) plastic |
1 x | Compact Silencer KOLM BX-155 |
3 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | DPSI RV Mini 6 (2008) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Race 650 Johnson motor 7.2v |
1 x | Esc X-55-SB-Pro |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Double BLOCK 5x10x5 mm (3 pcs) |
2 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | PIT (Aero-Naut) |
1 x | MPX screwable clips (5 pcs) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Ferrita 27x14x7 mm |
2 x | Esc MasterSPIN 100 Pro |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Muffler DLE 20 |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Servo arms set 40/50/55/5055 MG |
2 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Set Legs + Wheels with brake ASPIRE |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Vacuum pump P1-N |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Canister combo DLE 120 cc |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
2 x | Long pinned hinge (6 uds) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
2 x | 15 mm floating pad (30 pcs) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
2 x | Foam plastic plates (310x210x8 mm) |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | METEOR 1.000 mm kit |
3 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Short ball link M2 (6 uds) |
1 x | Switch Cap L (black) |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Servo SAVOX SA-128S SG |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Blind nut M5 (10 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
2 x | Propeller RABOESCH M4 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BD-5 Pro ARF |
1 x | ESC YGE 120 LVK |
2 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
2 x | Cap closure 33/23.5mm (2 uds) |
2 x | DUPLEX USB Adapter |
2 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Carburetor DLE 30 |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Futaba Neckstrap |
1 x | Smoke Oil Blue 5 l |
2 x | Rudder 107-06 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Servo HITEC HS-53 |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | OPUS-V / Jet-CC-BF |
2 x | DUPLEX 2.4EX MUI 150 Sensor |
2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
2 x | Pitot tube JETI MSpeed DUPLEX |
1 x | 57 mm micro-mini servo cover |
3 x | Pipa 3D BULL MØ1 2.600mm |
2 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | Motor Saito FG-14, 13,47 cc |
3 x | Short ball link M3 (6 uds) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
2 x | Canister combo DLE 55 cc |
1 x | Precision wrench L100 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Glass fabric 25 g (2 m²) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Engine Kolm BX-155-2 with starter |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
2 x | Fixed launching hook |
2 x | 1/10 Pilot "Jimmy" |
1 x | Softshell Hispano Aviación |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Servo HITEC HS-55 |
1 x | Spinner plastic black fixed propeller 30 mm |
1 x | Threaded coupler M2 (10 uds) |
1 x | USB Mini Camera endoscope |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Cap Hispano Aviación |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
2 x | Foam plastic plates (310x210x2 mm) |
2 x | Micro clevis 0.8 mm(10 uds) |
1 x | TMM 1210-3S heli |
1 x | USB Interface Adapter |
1 x | PS-050 TONEGAWA Servo |
2 x | Carbon blade 3D 230 mm |
2 x | Sensor Ignition DLE 20/20RA/30/35RA/55/55RA |
2 x | 36 mm red plastic spinner for fixed propeller |
2 x | M3 Maxi ball link (2 uds) |
1 x | Servo SAVOX SB-2290 SG |
1 x | Piston ring for DLE-55/111/222 |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | PowerBox Evolution |
1 x | Servo MKS 6100 DS |
1 x | Charger LiPo Charger4 |
3 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Spark plug cap DLE 55 / CM6 |
1 x | Gasket set DLE-30 |
2 x | M2 5Diam black ball link V2 (2 pcs) |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | AddCAP 10AS capacitors |
2 x | Servo HITEC HS-635HB Carbonite |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Gates hinge |
2 x | Carbon plate 350x150x3.0 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | Digital scale up to 40 kg |
3 x | Threaded insert M5 (10 pcs) |
3 x | Blind nut M2 (10 pcs) |
1 x | Stainless Steel Bend D 22x0,5mm |
1 x | Spring Clip 28 mm teflon tube |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | MPX-Dean "T" Adapter |
1 x | MPX Support |
2 x | Motor A200-8 |
1 x | NF-3XL set |
1 x | Motor A50-12 L V4 |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
2 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
2 x | Carburetor DLE 170M |
3 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Round Rod 1,0x1000 mm |
2 x | LightBox SR |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Propeller CFK 15x13 Slim |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | Fueling valve "Air" |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace) |
1 x | F450/550 Quadcopter, landing gear |
1 x | Metalic joint for DA-85/DA170 cilinder/elbow |
1 x | Motor Saito FG-36, 36 cc |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Esc MasterSPIN 66 Pro |
1 x | Lock nut M6 (10 pcs) |
1 x | MRPM-AC revolution sensor |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
3 x | Silent-blocks DLE 170M |
1 x | Pulley 8x13 mm (5 pcs) |
1 x | Conector JR Servo male (10 pcs) |
2 x | Pilot "Duke" Legends Series (Slimline) |
1 x | RX TARANIS V8FR-II HV 2.4 GHz |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
2 x | ABS Strip 1.0x4.0x1000 mm |
1 x | XPower XC4226/12 LS |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | EWC6 40 cm wing connector |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
3 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Flat washer 3.2 mm (20 pcs) |
2 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
2 x | Joint with bearing M2,5 22x5,5 |
2 x | Strip 3,5x1,75x330 mm |
1 x | Stainless Steel Bend D 12x0,4mm |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Blind nut M4 (4 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Sparkplug 1/4-32 |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Esc X-70-OPTO-Pro |
2 x | Fiberglass plate 350x150x1.5 mm |
2 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | 33,0 mm propeller (left propeller) |
1 x | Conector BEC male (10 pcs) |
1 x | 28x10 BIELA propeller |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | Propeller CFK 16x16 Slim |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Adapter 3,2 mm M6 |
1 x | Spinner plastic white fixed propeller 45 mm |
1 x | Motor A20-20 L EVO |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
3 x | PPM Encoder Module |
1 x | Bearings for motors hacker A50 |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | Spark Plug BRISK M14x1.25 |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
2 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | DUPLEX MRMP Hall EX |
2 x | Strip 1,5x1,5x330 mm |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Servo HITEC HS-5685MH |
1 x | Round Rod 2,5x1000 mm |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Copier 5x20 cm pcs |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Battery voltage telemetry |
3 x | Micro clevis (10 uds) |
1 x | Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Ventus 2cx 4.5 m Winglets |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Combo lighting module with covering drop shape |
2 x | Power Box GPS Sensor III |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | Screw M3x20 (10 pcs) |
3 x | Lock washer 2.7 mm (20 pcs) |
1 x | 30 cm BEC cable (male) |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
2 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Crystal TX 35.150 Ch 75 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Neoprene tube 7,5x3,5 mm (1 m) |
2 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Giant Scale Muffler D.A. 70 (2pcs) |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | Stainless Steel Bend D 28x0,6mm |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | Round Rod 1,25x1000 mm |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
2 x | Nut for mounting M2 (4 pcs) |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Long ball link M3 (6 uds) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Socket Head Screw M2x8 |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | ODYSSEY BLACK Eagle ARF 2190 mm |
1 x | Propeller CFK 15x13 |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
3 x | Long ball link M2 (6 uds) |
1 x | Receiver R7008HV comatible FUTABA |
1 x | Adapter 3,0 mm M6 |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Servo HITEC D951 TW |
1 x | Smoke pump RCEXL |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Kit repair carburator DLE-170 |
1 x | Frontal support Speed 400/480 |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
2 x | Large flex hinge (12 uds) |
1 x | |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | TUNED PIPE for motors up to 40-60 & 70-85 cc |
1 x | Electric Fuel pump |
1 x | Esc KOSMIK 160 HV |
1 x | 10 mm floating pad (72 pcs) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | DPSI RV Mini 6 Magic |
1 x | 2 piece mounting frame |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Lipo GENS Soaring 3300 mAh 2s 7.4v 30C |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | Axle for AXI 5325/xx motors |
2 x | 290 mm M5 Prop shaft |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Metal clevis M2 (10 uds) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Servo M2x7/16 screw (4 pcs) |
2 x | Ball link M2 (10 pcs) |
1 x | Crankcase Gasket set for ZG 74 / ZG 80 |
1 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | DLE-111 Crankcase V2 Conversion Kit |
3 x | Pilot "Anthony" (Slimline) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Suport PITOT |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Tacometer mini ignition RCEXL |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace) |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | 90x60 mm standart servo cover |
1 x | L ELBOW 90º ø 25 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Charging Extension 50cm for 2 Battery |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Receiver RFA05 5Ch compatible FUTABA |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | wire tensioner (silver) |
1 x | Wheel collar 2 mm Ø (4 uds) |
2 x | Transmitter JETI Duplex DS-12 EX Multimod BLACK |
1 x | Hose clips 6 mm |
1 x | Tape GFK 38 mm |
2 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Screw M2.5x8 (10 pcs) |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Size "M" motor holder for class 400 |
1 x | 300 Newtons FEMA absorber |
1 x | PowerBox Teleconverter S-BUS 2 |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | 1/6 Pilot "John" |
2 x | Adapter 5,0 mm M8 |
1 x | CC 02 |
1 x | Tail wheel for 5-8 kg models |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | SPARK Switch 7.4v |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | White aluminium 230 mm landing gear |
1 x | Spinner 110 mm GFK |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Servo HITEC HS-225 BB |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
2 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | SE-M Filter |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | CM-3 |
1 x | Filter Capacitor JR |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Spannlack 1000 ml |
1 x | DPSI RV Mini 5 Magic |
1 x | Spinner red 30 mm |
2 x | DLE 111 Old Crankshaft keyway |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Rudder 36x60 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | DYNAMOMETER S-1580 |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | Ignition module ZG 38/S/SC |
1 x | Axle for AXI 2208/xx motors |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | Screw M4x20 (10 pcs) |
2 x | DUPLEX 2.4EX MULi 6s M |
1 x | 20x15 Falcon electric V2 |
2 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | DPSI Ampere battery backer |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Futaba 52 mm servo arm |
2 x | |
1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | 45 mm gas motor standoff |
1 x | Cilinder joint for G230RC/G260RC |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Ball Bearings for motor A60-V2 |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Spray EC Red 400ml |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | DLE 111 pipe plug |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
2 x | Manometer 4 mm |
1 x | Servo DITEX EL0510M |
1 x | Propeller MENZ-S 30x12 |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Motor Mount for Multiplex FunJet |
1 x | Fixing Ring with Base 40 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Servo HITEC HS-785 HB |
1 x | EDGE 540S 50E yellow/black (SebArt) |
1 x | Carburetor DLE 170 |
1 x | Servo Bolt M3x6 (8 pcs) |
1 x | JIVE 80+LV Esc |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Hitec 52 mm servo arm |
1 x | ODYSSEY Porsche ARF 2190 mm |
1 x | A50 Motor Mount Alu complete set |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Esc KOSMIK 160+ HV COOL |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Aluminium battery holder red |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Servo holder for retract |
2 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Pan head screw M2x16 PH |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Tube holder |
1 x | Servo HITEC HS-82 MG |
1 x | Servo HITEC HS-325 BB |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Fiberglass plate 350x150x3.0 mm |
1 x | Adapter rotula M3 |
1 x | Saito FG-36 motor support |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Extension for SensorSwitch 60cm |
2 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Servo HITEC D950 TW |
1 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Propeller electric carbon 6x5 |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | D.A. Fueling Valve |
1 x | MPX housing with flange (4 pcs) |
2 x | P-51D "Blondie" 89" (2260 mm) |
1 x | MythoS 50E Yellow/Black |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Propeller CFK 17x18 |
3 x | Chopped glass fibre strands 3 mm |
1 x | Servo Mount S (red) |
1 x | ESC YGE 8 S |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Set Altimeter SHRead |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
2 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Dia. 20x15 mm teflon tube for escape |
1 x | Dia. 16x35 mm PTFE tube for escape |
1 x | 32x12 BIELA 3Bl propeller |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo |
1 x | PYRO 700-45 Long Axi |
1 x | Horizontal servo holder |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
2 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | Connector Sub-D 2+5 Female |
1 x | bavarianDEMON USB cable |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | MPX 8 pins plug mold |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Top light Red 10mm/3V (2 pcs) |
2 x | Piston ring for DLE-20 |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | HBC 10035-3 32-Bit |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | Red 3m5 mm connector holder |
1 x | Rudder 2_Tray 4.5~5 inch |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Cooler motor type 150 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Motor A50-16 S V4 |
1 x | SERVO DES 568 MG |
1 x | P-51D "Old Crow" 89" (2260 mm) |
2 x | Servo MKS HBL599 SL |
1 x | 23x10 BIELA propeller |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right hydropropeller) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
2 x | 5 mm gas motor standoff |
1 x | Metalic joint for DA-50R/DA100 cilinder/elbow |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Towing hook <3m |
1 x | Servo NARO Max Std |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Absorver mount set for 5-10 Kg models |
2 x | Socket Screw M2x3 mm (4 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | DUPLEX MUI 30 Sensor |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
2 x | Focke Wulf FW-190A-8 93", Electric retract Landing gear |
1 x | Switch Cap L (silver) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | Gear set HITEC HS-225 |
2 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Mini AVANTI S EDF 80MM RTF |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | F9F COUGAR Grey ARF 1.562 mm |
1 x | Cylynder DLE 20-RA |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
1 x | 270 mm 3/3 mm shaft ship |
2 x | Ferrita con funda |
1 x | Rangefinder 20x49 mm (2 pcs) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Spinner plastic 63 mm Red 2Bl |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Gearbox KPG25- 5,2:1pinion |
1 x | Servo HITEC HS-225 MG |
1 x | Esc X-75-OPTO-Pro |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
2 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Motor A30-14 L V4 |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Spinner INOVA 45 mm White |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Screw M2x8 (10 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Battery LiPo TATTU 12000 mAh 4S 14,8V 15C |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Motor mount M |
1 x | 15 mm gas motor standoff |
1 x | Extension 2/3 lipos JST/C |
3 x | Digital weight, angle and balance meter BASIC |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | PowerBox Champion SRS |
1 x | Woodruff key for DA50/85/100/150 and DA 200 |
1 x | ESC 40A. Opto starter Kolm |
1 x | Reed valve petal for DLE 120 |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Vacuum pump 12 CFM |
2 x | DPS Switch JR/JR |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Low line 74 mm |
1 x | Connector CAN 15 |
1 x | 50 mm gas motor standoff |
1 x | Servo HITEC HSB-9360TH |
1 x | Katana S 30E YELLOW/BLACK, Fuselage(SebART) |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Tailwheel for 40/90 size |
1 x | Universal Filter |
1 x | Boat 43 mm (5 pcs) |
1 x | Receiver replacement antenna, approx. 15 |
1 x | CDI EME 55/60 cc |
1 x | MythoS 125E YELLOW/BLACK (SebART) |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Frontal support Speed 600 |
1 x | Motor Typhoon 6/20 |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | DEMON CORTEXpro |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Adapter SPEED 480 whit axle short |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Motor B50-12 XL |
1 x | Electric coversion set |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Propeller set 400 (2R+2L) |
1 x | DUPLEX MUI 50 Sensor |
1 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 45C |
1 x | Tail gear set (60-120 class) |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | 2 mm male connector (2 pcs) with safety connector |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | WIND S 50E,White/red carena motor (SebART) |
1 x | Filetro gasoline filter Tillotson OW497 |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Cockpit plastic closing |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | DPSI Micro - RCS |
1 x | SPITFIRE Mk-IX 81" (2058 mm) |
1 x | SAVOX SH 0255 MG servo |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Left hydropropeller) |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Electric Landing Gear ASPIRE |
1 x | JIVE 80+HV Esc |
1 x | 102 mm aluminium spinner |
1 x | 12 mm floating pad (49 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | 3 LiPo XH>EH adapter |
1 x | Filler Gauges |
1 x | 1/6 Pilot "Tony" |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | 5 mm M2 variable horn |
1 x | 1/7 Pilot "Japanese" |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Sensor telemetry FUTABA SBS-01C |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | KingTech K45TP G4 Turboprop |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Small Crow DLE-170M |
1 x | Cockpit aluminium closing |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | 140 mm rods + T patellas set for direction control |
1 x | Hopper 125 ml XICOY |
2 x | 1/10 Pilot "Jack" |
1 x | Windsock Ozone L - 700 mm |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | SUPER DIMONA TC-80 |
1 x | Field folding model stand SebArt |
1 x | Rescue 1,8m2 / BackPack |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Lense for Spotlights, 20mm |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Tube bender |
1 x | Motor DLE 200cc Premium Muffler |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | 20 mm carbon horn |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | BEC 3A FOXY |
1 x | Adjustable brass horn threaded M3 |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | 5 mm M2 variable inclined horn |
1 x | Clip fixing for wing (2 pcs) |
1 x | FunCup XL RR |
1 x | Futaba Female 40 cm extension |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Horn for flap control (1 pcs) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Turbine LYNX 130 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Paramotor Trike XL |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Heli blades angle measurer |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Dremel 3000 130W |
1 x | Horn 5/20 with M2 Bearing |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | 100 mm rods set for direction control |
1 x | Cable with accesories |
1 x | 90 mm rods + T patellas set for direction control |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Propeller balancer |
1 x | Straightened threaded rod M2-1m |
1 x | MAX pilot ARTF |
1 x | |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | 2,0x50 mm allen screwdriver |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Short adjustable control horn 3x24 |
1 x | |
1 x | Canopy Latch |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Horn 20x28,5 mm (2 pcs) |
![](images/pixel_black.gif) |
107,137.68EUR |