1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Mudguard wheels 112/127 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Ferrita 14x8x5.5 mm |
1 x | PPM Encoder Module |
1 x | Ferrita 17x10x6.5 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Tailwheel for 60/120 size |
1 x | 2 LiPo XH>EH adapter |
1 x | Quick hose connector 3-3 mm |
1 x | DPSI Ampere battery backer |
1 x | Cabling for Fox MDM1 wings |
1 x | CC 02 |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Connector CAN 15 |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Stickers-digit for marking |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Aero shocks |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Neumatic retractable landing gear (Aero-Naut) |
1 x | Trailing leg 131 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | 3 LiPo XH>EH adapter |
1 x | Circlick securite |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | |
1 x | Crimping tool |
1 x | Oracover CARBON Metalic 1 m |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Flap hinge (6 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | 25 mm Sandpaper file |
1 x | Micro flex hinge (12 uds) |
1 x | Copier 2x20 cm pcs |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | 40 mm gas motor standoff |
1 x | 20x200 mm battery rings |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | Medidor ángulos y/o incidencias |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Body for landing gear Ø 4 mm |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Propeller balancer |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 30 cm BEC cable (female) |
1 x | Air pressure gauge |
1 x | Tail wheel for 5-8 kg models |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Connector Sub-D 2+5 Male |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Jeti Black cap |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | 1,5x50 mm allen screwdriver |
1 x | 3,0x60 mm allen screwdriver |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Blue smoke canister 140 g |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Dremel PERMAGRIT thin lime |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Dremel 3000 130W |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Green silicone 0,25 qmm wire (50 m) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Dean-T Plug Mold |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | 3l Smoke oil |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Aluminium battery holder red |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Marker ties (20 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Metal ring front FEMA |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Ferrita 27x14x7 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Ferrita con funda |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Ventus 1:4 set of instruments |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | 5 mm M2 variable inclined horn |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Extension 100 cm (Futaba) |
1 x | Extension 7.5 cm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | 4 LiPo XH>EH adapter |
1 x | Tow hook for tug |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Cable control set |
1 x | Battery charging cable XT60 |
1 x | Optical RPM Sensor |
1 x | Quick hose connector 3-3 mm |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 30 cm BEC cable (male) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Horn mando long (2 pcs) |
1 x | CC 01 |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Hose connector stopper 4 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | 6 mm aluminium horn with patella |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Horn for flap control (1 pcs) |
1 x | Tailwheel for 1-3 kg models |
1 x | Tailwheel for 20/60 size |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Landing gear strap medium (4 uds) |
1 x | Extension 15 cm (Futaba) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Adapter lead MPX/XT60 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Angle of incidence meter |
1 x | Extension 30 cm (Futaba) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | WingFix ULTRA Black Edition |
1 x | Adjustable brass horn threaded M3 |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Landing gear strap large (4 uds) |
1 x | Suncover 100cc Red |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | LOWER TOW HOOK |
1 x | Cable with accesories |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Manometer 4 mm |
1 x | Towing hook |
1 x | DYNAMOMETER S-1580 |
|
6,372.89EUR |