| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 4 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 4 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | Round Rod 1,5x1000 mm |
| 3 x | Round Rod 2,5x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 3 x | ABS Strip 1.0x3.0x1000 mm |
| 3 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 2 x | Gates hinge aluminium (1 pcs) |
| 2 x | Black silicone 1,0 qmm wire (50 m) |
| 1 x | Catalog AERO-NAUT 2016 |
| 2 x | Extinguisher CO2 - 2 Kg |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Gear for D 54 |
| 1 x | Silicone black 0,75 qmm cable ( 1 m) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Anchor 50 mm (2 uds) |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Motor DLE 40 cc Twin |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | Oracover Green10 m |
| 1 x | Glases Nimbus |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Propeller balancer |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Servo NARO Max Std |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Hitec 30 mm servo rounded arm |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Canopy Latch |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 2 x | Strip 2,0x2,0x330 mm |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | SERVO DES 707 BB MG |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | Servo MKS HV1220 |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 2 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Futaba 20 mm servo arm |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Servo HITEC D941 TW |
| 1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Race Outboard MERCURY type A |
| 1 x | TrainerCord (master-learner) |
| 2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 3 x | ABS "T" angle 10.0x10.0x1000 mm |
| 2 x | Servo KST X08 Plus 9g HV servo |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 2 x | Adapter rotula M3 |
| 2 x | 15 mm reinforced hinge |
| 2 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Silicone red 0,5 qmm wire ( 1 m) |
| 3 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | 1000 ml sealer (DOPE) |
| 2 x | Regulador NAVY 540R |
| 2 x | Aramid 50 daN 50 m |
| 1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
| 2 x | 800TVL CMOS camera for FPV |
| 1 x | Parachute BACKUP X100 |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Socket head ball link M3 (2 uds) |
| 2 x | Soporte metal para servos |
| 1 x | VBar NEO |
| 2 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Futaba 30 mm servo arm with M3 ball link |
| 1 x | 25 mm Sandpaper file |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 1 x | Servo HITEC HS-485 HB |
| 1 x | Kwik link with arm M3xM2xL24 |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | CC 01 |
| 2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Rudder tandem for two Futaba servos |
| 1 x | Hovercraft sailcloth |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | "M" set |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Hinge 4x14 mm (20 pcs) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Covered closure or fairings |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Servo HITEC HS-325 BB |
| 1 x | Xplorer4 anemometro |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | PIX Hawk with accesories |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Protective Cover for wires Ø 3 mm 1000 mm |
| 1 x | Sensor Ignition RCEXL Universal |
| 1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
| 1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 1 x | Gold antispark 4 mm plug |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Servo FUTABA BLS172 SV |
| 1 x | Tape GFK 38 mm |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Futaba BLS255/272/471SV - Gear Set |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | 290 mm M5 Prop shaft |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Blue metalic ball link M2/2 azul (2 pcs) |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 2 x | Horn 5/10 with M2 Bearing |
| 1 x | Spannlack 1000 ml |
| 2 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | 20 g tin paste |
| 1 x | Blind nut M5 (10 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Motor RACE 20 Navy 12v |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | LUCAS pilot ARTF |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Digital scale up to 40 kg |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Cockpit aluminium closing |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Servo inverter |
| 1 x | Tow hook for tug |
| 2 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Servo Dymond D 37 Eco |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Motor XPOWER F2919/10 F5J Light |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Servo FUTABA BLS173 SV |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Small Crow DLE-170M |
| 1 x | Hitec 38 mm servo arm with ball link |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Soporte servo KST X08/H and Plus |
| 1 x | Tape GFK 50 mm |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | BEC 3A FOXY |
| 1 x | Servo FUTABA S 3072 HV S-Bus |
| 1 x | Servo SAVOX SA-1256 TG |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | Servo HS-5070 MH Hi Volt |
| 2 x | Connector CAN 15 |
| 1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Extension silicon 50 cm (Futaba) |
| 1 x | Optotronix Aurora Plug |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | 18 mm reinforced hinge |
| 1 x | M3 Maxi ball link (2 uds) |
| 2 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Servo Digital HITEC HS-5035 HD |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | 45 mm rods set for direction control |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Servo FUTABA BLS 276SV |
| 1 x | Control horn long w/ball |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Red aluminium servo arm V3-Futaba 1,0inch |
| 1 x | M3 black washers (4 pcs) |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 2 x | 6 mm M3 variable inclined horn |
| 1 x | Servo SAVOX SV-1260 MG |
| 1 x | Circlick securite |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | Green smoke canister 65 g |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Extension silicon 25 cm (Futaba) |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
| 1 x | Oracover Brown 2 m |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Silicone black 0,75 qmm wire ( 25 m) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | Aqua RACE 70 (without motor) |
| 1 x | SAVOX SH 0254 servo |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Servo FUTABA S 3071 HV S-Bus |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Ancla 16 mm (2 pcs) |
| 1 x | Para-RC Mix |
| 1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | Fresa corte diamante Ø 2.7mm (bola) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Spare Shaft Ø6mm L:450mm M5 |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | XT-60 connector (female) |
| 1 x | Alu servo arm double RHINO |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Servo TT ACE SHV 1504 MG |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Servo RHINO pro SHV digi 4 |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Blind nut M3 (4 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | Glases Ace |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Spikes Band (5 m) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | Silicon black 2,5 qmm cable ( 25 m) |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | White smoke canister 65 g |
| 1 x | Red silicone 1,0 qmm wire (50 m) |
| 1 x | Servos security connector (2 pcs) |
| 1 x | Opale Rucksack |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | ALU servo arm 3 mm shaft |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Servo HITEC HS-5625 MG Digi |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Hot Glue Stick RED |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Anchor of tow Met. 60 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Spray EC Red 400ml |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Jeti Black cap |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Rigid coupling brass Ø 3 mm L: 20 mm |
| 1 x | Ancla Admiralsanker 60 mm (2pcs) |
| 1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
| 1 x | 140 mm rods set for direction control |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | Micro clevis 0.8 mm(10 uds) |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
| 1 x | Ancla Admiralsanker 70 mm (2pcs) |
| 1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Futaba 52 mm servo arm |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Futaba 38 mm servo arm |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | Glases Moritz |
| 1 x | 12 mm floating pad (49 pcs) |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Smoke set "M" |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | BOX-Setup Actro-marine |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Short ball link M2 (6 uds) |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
| 1 x | Glases Nimbus "Black" |
| 1 x | Servo safety connector (10 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | DPS Switch JR/JR |
| 1 x | Ancla 35 x 22 mm (2 pcs) |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Ply-Span 450x600/13g Yellow |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Coupling bush 5 - 5 mm |
| 1 x | FunCup XL RR |
| 1 x | Futaba 25 mm servo arm with ball link |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Connectors DEANS (T) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Ancla Hist. 67 mm (2 uds) |
| 1 x | Micro clevis (10 uds) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Silicone red 0,5 qmm wire ( 25 m) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | Cockpit metalic closing |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Servo HITEC HS-635HB Carbonite |
| 1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
 |
| 16,544.54EUR |
