| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Adaptadores carga 6s JST-XH |
| 4 x | Crimping tool |
| 2 x | Extension MPX-MPX 20 cm |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | GameCommander USB Universal |
| 1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
| 1 x | Motor KAVAN PRO 2225-1600 |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Cinta Goldfix 1m |
| 1 x | Interface Realflight Simulator |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Black silicone 1,0 qmm wire (50 m) |
| 1 x | |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Screwdriver for Torx® TX6 |
| 2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | USB Mini Camera endoscope |
| 1 x | 2,0x50 mm allen screwdriver |
| 2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | ESC ALPHA 60A HV |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 2 x | Adapter 4,0 mm M6 |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Small aluminium horn gold (2pcs) |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Protective Cover for wires Ø 20 mm 1000 mm |
| 2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | Horn 6/27 with M3 Bearing |
| 2 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | Cable with accesories |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Xplorer1 anemometro |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Cut tube |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Rudder 2_Tray 3.5~4 inch |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
| 2 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | |
| 1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
| 1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
| 1 x | Propeller Pleg CAM Carbon 11x5 |
| 1 x | Propeller Pleg CAM Carbon 10.5x6 |
| 1 x | Propeller Pleg CAM Carbon 12x9 |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | Propeller Pleg CAM Carbon 11x4 |
| 1 x | Propeller Pleg CAM Carbon 15x10 |
| 1 x | Propeller Pleg CAM Carbon 11x7 |
| 1 x | Propeller Pleg CAM Carbon 15x8 |
| 1 x | Propeller Pleg CAM Carbon 13x11 |
| 1 x | Propeller Pleg CAM Carbon 10x8 |
| 1 x | Propeller Pleg CAM Carbon 10x12 |
| 1 x | Propeller Pleg CAM Carbon 14x12 |
| 1 x | Propeller Pleg CAM Carbon 13x8 |
| 1 x | Propeller Pleg CAM Carbon 14x10 |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | DYMOND VTX UBS Programming adapter |
| 1 x | Sealing Iron STANDARD |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Battery charging cable XT60 |
| 1 x | Hitec 20 mm servo arm |
| 1 x | 30 mm Alu spinner 3 mm pleg. propeller |
| 1 x | Spinner fold propeller 50 mm (white spare spinner) |
| 1 x | Spinner fold propeller 36 mm (white spare spinner) |
| 1 x | Z Spinner (CN) 35mm |
| 2 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
| 1 x | Porta Kwik link M4 3 mm (2 pcs) |
| 1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
| 1 x | Tool for entel |
| 1 x | Horn with ball 40x30 |
| 1 x | Long extra-strong control horn with bearing 2,8x34 |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Xplorer4 anemometro |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Pulley brass 6/1,5 (2 pcs) |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Threaded coupler M2 (10 pcs) |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | PROFI Box JETI |
| 1 x | Kontronik ProgUnit |
| 1 x | Long adjustable control horn with bearing |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Mini Infrared Thermomiter |
| 1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
| 1 x | Spinner fold propeller 38 mm (white spare spinner) |
| 1 x | Spinner propeller pleg. 38 mm / 5 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5 mm |
| 1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
| 1 x | White spinner propeller pleg. 42 mm / 6 mm |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 1 x | Z Spinner (CN) 42mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
| 1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
| 1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
| 1 x | Spinner propeller pleg. 33 mm / 5,0 mm |
| 1 x | Spare white 38-45 mm spinner |
| 1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
 |
| 6,017.19EUR |
many units
temporarily out of stock
enought units
few units
