1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
2 x | Glider PIROL |
3 x | X-RAY Micro QR (Elevator) |
1 x | DINO Glider ARC |
1 x | BABY glider (Aero-naut) |
1 x | Glider STROLCH |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | Glidder Mü13e (Bergfalke) |
1 x | X-RAY Micro QR (Rudder) |
1 x | X-RAY Micro QR |
2 x | Glider IKARUS |
2 x | Glider KNIRPS |
1 x | BABY glider drawings (Aero-naut) |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Avia (Top Model) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Logo 400 SE VBar |
1 x | Field folding model stand |
1 x | Angle of incidence meter |
1 x | 45 mm rods set for direction control |
1 x | 140 mm rods + T patellas set for direction control |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
3 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
3 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | ABS tube 5.0x4.0x156 mm |
3 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Surface Indicator Gauge Small |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | ABS tube 16.0x14.0x1000 mm |
3 x | ABS tube 8.0x6.0x1000 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
2 x | ABS tube 14.0x10.0x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | ABS tube 4.0x3.0x1000 mm |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | ABS tube 8.0x7.0x1000 mm |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | 45 mm rods + T patellas set for direction control |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
3 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Canopy Latch |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
3 x | ABS tube 5.0x4.0x1000 mm |
3 x | ABS tube 3.0x1.0x1000 mm |
3 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | 100 mm rods set for direction control |
1 x | Clip fixing for wing (2 pcs) |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | MZ-18, 9 Channel HoTT |
1 x | Ciano KAVAN Thick 20g |
1 x | Ciano KAVAN Super Thin 20g |
2 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Quick hose connector 6-4 mm |
1 x | Mini Infrared Thermomiter |
1 x | Spikes Band (5 m) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | BETA 1400 ARF Red |
1 x | KAVAN Hand crank fuel pump |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Propeller electric carbon 8.5x7 |
1 x | Propeller electric carbon 7x7 |
1 x | GP 15 JETA |
1 x | Propeller electric carbon 8.5x6 |
1 x | DELPHIN Race 3.6m c64 |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Propeller electric carbon 9.5x7 |
1 x | Propeller electric carbon 6x5 |
1 x | Foam air filter Ø 48 mm, blue |
1 x | IMPULSE 2 F3F |
1 x | LOGO 600 SX (kit) |
1 x | Servo HITEC D85 MG |
1 x | Servo HITEC HS-5585MH |
1 x | Cockpit aluminium closing 4.7g |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Servo HITEC D645 MW |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Servo SAVOX SV-1261 MG |
1 x | Servo HITEC HS-311 |
1 x | Piñones SAVOX SH-0350 |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Servo TOPMODEL S7520 MG |
1 x | 58 mm micro servo cover |
1 x | Servo TOPMODEL DS1413 T |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | USB programador GO servos |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | LA500 tail empennage |
1 x | Piñon motor rotor LA-500 |
1 x | LA500 front gear holder |
1 x | SAVOX SH 0255 MG servo |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Servo HITEC D954 TW |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | HITEC DPC-11 programmer |
1 x | Servo HITEC HS-45 HB |
1 x | Servo TT ACE SHV 1504 MG |
1 x | Servo SAVOX SB-2290 SG |
1 x | Servo SAVOX SV-1270 TG |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Side Plate |
1 x | Head lower part |
1 x | 50x45 mm micro-mini servo cover |
1 x | Split pin 1x8 mm (10 uds) |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | 13 mm wing servo holder |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Landing gear frontal support 29x26x13,5 |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Fast attachment for servos (25 pcs) |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Ball joint long |
1 x | Blade holder center |
1 x | Head runner |
1 x | Servo inverter |
1 x | Servo mounting frame SV-1260MG |
1 x | Servo Tester |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Servoarm Aluminium SH-82 |
1 x | Servo SAVOX SV-1260 MG |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Professional Servo tester |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC D951 TW |
1 x | SAVOX SH 1290 MG servo digi |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Servo HITEC D950 TW |
1 x | Servoarm SH-81, two sides, aluminium |
2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | 10-15mm Servo Arm |
1 x | Servo SAVOX SA-128S SG |
1 x | Tail boom |
1 x | Rotor Mast |
1 x | Tail tube RAINBOW |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Bearing 3x6x2,5 |
1 x | Servo Fork |
1 x | Nut M1,6 |
1 x | Screws M1,6x6 Allen |
1 x | Wheel keeper washer |
1 x | Screws flush mount M2 |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 12x3.8 SF |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Propeller APC 10x4.5 MR |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller APC 11x4.7 SF |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 4.1x4.1 Electric |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Landing gear frontal support 25x32x16 |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Snap for floding prop for 2 mm axi |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Snap short M2 (10 uds) |
1 x | 90x75 mm standart servo cover |
1 x | 90x60 mm standart servo cover |
1 x | 11 mm wing servo holder |
1 x | L-shaped servo mount |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | 25 mm carbon servo arm |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Servo GO-02 Digital 1.8g |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Servos security connector (2 pcs) |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo GO-1013 MG 3.8kg |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | LA500 Autogyro |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Rotorshape Autogyro |
1 x | LA500 cyclic central part |
1 x | Cierva C30 spanish decoration Stickers |
1 x | LA500 housing-lower cyclic |
1 x | Complet landing gear |
1 x | LA500 pre-rotation gear hub |
1 x | Steering lever |
1 x | LA500 Blades |
|
21,485.38EUR |