1 x | Small Crow DLE-170M |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | Glider STROLCH |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Servo MKS HV6130 |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
2 x | Dean-T Plug Mold |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
2 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Servo FUTABA BLS172 SV |
1 x | 10-15mm Servo Arm |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
2 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
2 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Ferrita con funda |
1 x | Soporte filtro FESTO (4 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | 3,0x60 mm allen screwdriver |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Support XT60 conector (2 pcs) |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Spark plug key NGK MVVS |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Starter EM Gear Power 80 |
1 x | Ignition bed V2 Red color |
1 x | DLE 30 complete electronic ignition |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
2 x | Support pumb/filter Xicoy X45 |
1 x | Programador FUTABA USB CIU-3 |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
1 x | Xplorer1 anemometro |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | Servo GO-09 9g |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | 100g Flux Paste for Silver Solder |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Stickers-digit for marking |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Concave-Convex sandpaper file 13 mm |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Futaba BLS152 - Upper Case |
1 x | |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Servo MKS HV 777A+ |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Servo FUTABA SBL 471 SV |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Servo MKS HV747 |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
2 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Recessed MPX connector support (6 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Servo MKS HBL380 |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Bungee HLG Premium |
1 x | Oracover Yellow CUB 10 m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Oracover Azul Cielo 2 m |
1 x | Cabel "Y" 15 cm |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
2 x | Medidor ángulos y/o incidencias |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Extension 100 cm (Futaba) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | 30 cm DEANS female connector |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | Anchor 80 mm (2 uds) |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Railing L250 mm (10 pcs) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Ancla 16 mm (2 pcs) |
1 x | Starter EM Gear Power 250 |
1 x | Ventral support for AX-18/AX-60 |
1 x | 800TVL CMOS camera for FPV |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | L-shaped servo mount |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Gracia (Top Model) |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Green smoke canister 100 g |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Remote electric ignition system |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Blue smoke canister 140 g |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Extension MPX-MPX 20 cm |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | "S" set for planes |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | 3l Smoke oil |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Servo holder for retract |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | AX-60 starters (5 pcs) |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | BALSA triangular 15x15x1000 mm |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | AXI 2826/10 V2 Long |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | PHASOR RACE 2035/4100 1D |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Support Antena 2.4 Ghz (2 pcs) |
2 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | DPSI RV Mini 6 (2008) |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
1 x | DPSI magnetic switch actuator (PCB) |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Mold plugs XT-30 |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | MR30 connector male |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | DINO Glider ARC |
1 x | X-RAY Micro QR |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | External LED's (2 pcs) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | BALSA triangular 8x8x1000 mm |
2 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | PowerBox Competition |
1 x | Extension for LC-Display 50cm |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | AXI 2217/16 V2 Long |
1 x | Chopped glass fibre strands 3 mm |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Support Filtro FESTO |
1 x | AXI 2826/6 V2 Long |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | PPM Encoder Module |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | DPSI RV Mini 5 (2008) |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Threaded insert M6 (10 pcs) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Heli blades angle measurer |
1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Heli digital angle measurer |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Mini-handed clamp |
1 x | 25 mm Sandpaper file |
1 x | Support Pitot JETI |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | PIN Connector female (100 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Extra long horn 60x30 |
1 x | BALSA triangular 10x10x1000 mm |
1 x | MR30 connector female |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Short adjustable control horn 3x24 |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Red 3m5 mm connector holder |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | PS-050 TONEGAWA Servo |
1 x | XT-60 connector (male) |
1 x | XH LiPo extension lead |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Propeller RABOESCH M4 45 mm (4 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left) |
1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller) |
1 x | 28 mm turnbuckle |
1 x | 12 mm mast holder |
1 x | 42,0 mm propeller (rigth propeller) |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | 10 mm portholes (10 pcs) |
1 x | 29,0 mm propeller (left propeller) |
1 x | 300x4 mm M4 shaft ship |
1 x | Cornamusa 8 mm plastico (10 pcs) |
1 x | Chigre de amarre Scale 1:32 |
1 x | Doppelpoller 17 mm (6 uds) |
1 x | Propeller AERONAUT M4 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 60 mm (5 Blades) (Right hydropropeller) |
1 x | 12 mm portholes (10 pcs) |
1 x | 38 mm fenders (10 pcs) |
1 x | 12 mm dogdrive props |
2 x | 36,0 mm propeller (rigth propeller) |
1 x | 75 mm |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | Coupling for 3 mm axis |
1 x | Davit 70 mm (2 pcs) |
1 x | Deck Lamp with Reflector Ø 22 mm 3 V |
1 x | Coupling for 4 mm axis |
1 x | Clamping slide 14mm (10 pcs) plastic |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | Escalera gris 5 mm (L 60mm) |
1 x | COMPACT drive 26/45-20 DL=175 motor |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 65 mm (4 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right) |
1 x | Propeller Helice 4BL 70 mm M4 plastico Izda |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Right hydropropeller) |
1 x | Propeller AERO-NAUT M4 70 mm (6 Blades pr) (Right hydropropeller |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | Propeller AERO-NAUT M4 65 mm (6 Blades pr) (Right hydropropeller |
1 x | Propeller Ms 65R (rigth propeller) |
1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | 42,0 mm propeller (left propeller) |
1 x | 270 mm 3/3 mm shaft ship |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | 14 mm portholes (10 pcs) |
1 x | 25 mm fenders (10 pcs) |
1 x | 33,0 mm propeller (left propeller) |
1 x | 39,0 mm propeller (left propeller) |
1 x | 290 mm M5 Prop shaft |
1 x | 39,0 mm propeller (rigth propeller) |
1 x | 45 mm flag mast |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | 3 mm Leader (L 100 mm) |
|
17,619.41EUR |