1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Aluminium wide washer M3 blue (4 pcs) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | Quicklock washer 1 mm (10 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Adjustable launching hook |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | 12 mm floating pad (49 pcs) |
2 x | Threaded insert M5 (10 pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Support conector MPX (6 pcs) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Telemetry interface ALTIS to Futaba |
1 x | Altimeter Altis V4 |
1 x | Device Terminal |
1 x | GPS Altis |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Mudguard wheels 112/127 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Blind nut M8 (10 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Socket Head Screw M2x8 |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Threaded insert M6 (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Blind nut M5 (4 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Blind nut M4 (4 pcs) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
3 x | DYNAMOMETER S-1580 |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Cylinder for ZG20 |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Indoor hinge with servo arm integraded |
1 x | Long pinned hinge (6 uds) |
1 x | Miniature brass strap hinge, 1 m |
2 x | Optical RPM Sensor |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | 22m Fitting barb |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Covered closure or fairings |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Piston ring for DA-150 |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Xplorer3 anemometro |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Small flex hinge (12 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Small pinned hinge (6 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Cable Cargador FUTABA |
1 x | Large flex hinge (12 uds) |
1 x | Robart Door Hinge (Pk2) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Gates hinge |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | T-shape holder metal LAMA |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | 1000 cc gasoline fuel tank complet |
1 x | VTX 477 Carbon Rotorblade |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | Axi for MVVS 3.5 Sport |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | "Taxi Tank" Fuel Tank |
1 x | diameter silicone tube for glow |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
1 x | 18m Fitting barb |
1 x | Tail boom brace LOGO 480 |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Motor MVVS 2.0/1120 |
1 x | Socket Head Screw M2x12 |
1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Lipo RO-POWER Ultra MAX 2300 mAh 14.8v 35c |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | XT-60 connector (female) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case) |
1 x | Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
1 x | Battery E-Flite 150 mAh 1S 3,7V 45C for WHIPIT |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GEN2700 mAh 3S 11.1v Transmitter Pack (Gens Ace) |
|
5,914.51EUR |