| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Interface Realflight Simulator |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 2 x | LA500 tail empennage |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 2 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | BEC 3A FOXY |
| 2 x | LA500 pre-rotation gear hub |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | LA500 ciclic lever |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Motor rotor LA-500 |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Spray Graphit 33 |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Glases Innovation Plus |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 2 x | |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Marker ties (20 pcs) |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Spikes Band (5 m) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Propeller MENZ-S 19x12 |
| 1 x | Propeller MENZ-S 17x6 |
| 1 x | Propeller MENZ-S 17x10 |
| 1 x | Propeller MENZ-S 15x6 3 blades |
| 1 x | Propeller MENZ-S 18x10 |
| 1 x | Propeller MENZ-S 18x6 |
| 1 x | Propeller MENZ-S 20x9 |
| 1 x | Propeller MENZ-S 21x8 3-Blades |
| 1 x | Propeller MENZ-S 21x12 |
| 1 x | Propeller MENZ-S 16x12 |
| 1 x | Propeller MENZ-S 16x10 3-Blades |
| 1 x | Propeller MENZ-S 15x12 |
| 1 x | Propeller MENZ-S 19x8 |
| 1 x | Propeller MENZ-S 20x12 |
| 1 x | Propeller MENZ-S 16x6 |
| 1 x | Propeller MENZ-S 18x10 3-Blades |
| 1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | LA500 nose |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Bearing housing |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | M3/5Diam metal ball link V3 (2 pcs) |
| 1 x | LA500 housing-lower cyclic |
| 1 x | Raer wall |
| 1 x | LA500 Blades |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | GPS Altis |
| 1 x | Motor UMS Radial-7-50cc gas |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | 20x200 mm battery rings |
| 1 x | Tape GFK 50 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Servoarm SH-81, two sides, aluminium |
| 1 x | Servo SAVOX SA-1258 TG |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Carbon plate 350x150x5.0 mm |
| 1 x | Carbon plate 700x550x0.5 mm |
| 1 x | SPS Remote switch actuator |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | USB HLS prog. interface |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Micro Switch button |
| 1 x | MAX BEC 2D plus EX |
| 1 x | SPARK Switch 5.9v |
| 1 x | HITEC 17 mm servo arm with ball link HITEC |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Hitec 38 mm servo arm with ball link |
| 1 x | Stainless Steel S-Bend D25x0,5mm |
| 1 x | Telemetry interface ALTIS 6 cm |
| 1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
| 1 x | MTW TD120K MUFFLER |
| 1 x | Hitec 46 mm servo arm with ball link |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Pitts Muffler for D.A. 120 |
| 1 x | 46 mm Futaba servo arm tandem with ball link |
| 1 x | Hitec 38 mm servo arm |
| 1 x | Hitec 25 mm servo arm with ball link |
| 1 x | 90° TUBE-ANGLE Ø 25 mm |
| 1 x | XTorque CFK Servohebel 38 HITEC 25T |
| 1 x | Sensor Ignition RCEXL Universal |
| 1 x | 180° TUBE-ANGLE Ø 25 mm |
| 1 x | Altimeter Altis NAO |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Stainless Steel Bend D 15x0,4mm |
| 1 x | Stainless Steel Bend D 28x0,6mm |
| 1 x | Escape Krumscheid 81-6 hasta 55 cc |
| 1 x | Futaba 2x20 mm servo double arm |
| 1 x | Hitec 20 mm servo arm |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Captador RCEXL para DA |
 |
| 6,495.64EUR |
.jpg "COMFORT MOUNT ø 25 mm")
