| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Paint gun for sprays |
| 1 x | 20 g tin paste |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Spannlack 1000 ml |
| 2 x | Partall paste 650 g |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Spray Graphit 33 |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Nitroverdu 500 ml |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 2 x | Optical RPM Sensor |
| 2 x | DYNAMOMETER S-1580 |
| 2 x | 120x60 mm SLH KOVO wheel |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Release wax 250ml |
| 1 x | Spray EC Red 400ml |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 2 x | Cabel charger transmitter GRAUPNER |
| 2 x | CC 01 |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | JETImodel SINGLE BEC |
| 1 x | 4 LiPo XH>EH adapter |
| 2 x | TrainerCord (master-learner) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | USB HLS prog. interface |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | 30 cm BEC cable (male) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | CC 05 |
| 1 x | Crimping tool |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | 3l Smoke oil |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Xplorer2 anemometro |
| 2 x | Hot Glue Stick RED |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Oil FUCHS 1 liter |
| 1 x | Extra hard 250 ccm complete gasoline fuel tank |
| 1 x | "Taxi Tank" Fuel Tank |
| 2 x | Conector FESTO M3 Quick 3mm 90º |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | BABY glider drawings (Aero-naut) |
| 1 x | FESTO connector M7 Quick 6mm 90º |
| 1 x | X-RAY Micro QR |
| 1 x | Sparkplug NGK CM6 |
| 1 x | LED wire (orange - 2pcs) |
| 1 x | THERMIK XL 4000 mm |
| 1 x | Spark motor OS Type F |
| 3 x | Rocket D3-P |
| 1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
| 1 x | FOX ARF 2000 mm Red (Hacker Model) |
| 1 x | Sparkplug 1/4-32 Glow |
| 2 x | Glider Ka 7 Red (2540mm) |
| 1 x | Swift ARF 2000 mm Red (Hacker Model) |
| 1 x | Resistor 3W 5% OR47 |
| 1 x | Landing lights 18 mm (0.71in) |
| 1 x | Sparkplug 1/4-32 EVO 10GX |
| 1 x | Sparkplug Saito 400 |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Connector CAN 15 |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Circlick securite |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Propeller 3x2 |
| 1 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | Reductora IPS dual-motor 10,7:1 with spinner |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Angle support XT60 conector |
| 1 x | Support Filtro FESTO |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Support FUEL DOT V3 |
| 1 x | Support Pitot JETI |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Foam wheel Ø 38 mm (2 pcs) |
| 1 x | Cooler motor type 150 |
| 1 x | Cooler motor type 300 |
| 1 x | Propeller 9x4,7 SlowFlyer |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Racor 4/6 mm |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | Hopper 125 ml XICOY with support |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Conector FESTO G1/8 Quick 4mm 90º |
| 1 x | Charger SKY RC D200 neo |
| 1 x | QS Bulkhead Valve 4/4 mm |
| 1 x | Racor 2/3 mm |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Racor 4/3 mm |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Fod Guard 94x32 mm |
| 1 x | FESTO connector M7 barb fitting 6mm |
| 1 x | FESTO connector 1/8 Quick 6mm 90º |
| 1 x | Tape GFK 38 mm |
| 1 x | Cockpit aluminium closing |
| 1 x | Cockpit plastic closing |
| 1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
| 1 x | EME 55 cc carburetor WALBRO |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Festo 6mm Tubing Holder (10 uds) |
| 1 x | Festo 4mm Tubing Holder (10 uds) |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Racor 4/4 mm |
| 1 x | Male connector for 20 pines AWG |
| 1 x | DC-3 Douglas (White/Blue) 1800 mm |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Suncover 100cc Red |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Canopy Latch |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | Glider KNIRPS |
 |
| 6,436.69EUR |
.jpg "COMFORT MOUNT ø 25 mm")
