| 2 x | T-Motor U7-V2.0 Kv420 |
| 1 x | Motor A2212/13T |
| 2 x | Universal Colour Paste deep black 250 g |
| 2 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | GLOW 2C + accesories |
| 1 x | Green smoke canister 100 g |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Vacuum pump P1-N |
| 1 x | KAVAN Hand crank fuel pump |
| 2 x | Z Bender - S Type Tool |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Fixed launching hook |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | USB Mini Camera endoscope |
| 1 x | PPM Encoder Module |
| 1 x | Field folding model stand |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | PowerFuel RX V2 Fuel Pump |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Ball Link Plier |
| 1 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Oracover Azul 2 m |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 2 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Optical RPM Sensor |
| 2 x | Initior Receiver FRX2 Wireless |
| 3 x | AX-60 starters (5 pcs) |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 2 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
| 1 x | Blue smoke canister 140 g |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Aluminium ignition bad (blue) |
| 2 x | Green smoke canister 65 g |
| 3 x | Extension silicon 25 cm (Futaba) |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
| 1 x | Red smoke canister 100 g |
| 2 x | Yellow smoke canister 100 g |
| 1 x | Propeller 3x2 |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Gear carbonite set HITEC HS-6965 |
| 1 x | Servo HITEC HS-45 HB, servo box |
| 1 x | PPS-4D Propeller |
| 1 x | EasyFLY Addon |
| 1 x | Crimping tool |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Sub-D Plug Mold |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | XT-60 Plug Mold |
| 1 x | Bungee HLG Premium |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Glases Moritz |
| 1 x | Glases Nimbus "Black" |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Rubber bushing with bracket "A" type (2 pcs) |
| 2 x | White smoke canister 140 g |
| 1 x | Red smoke canister 65 g |
| 1 x | Compact on-board starting system (9713) |
| 1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
| 1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
| 1 x | "S" set for planes |
| 1 x | Encendido CDI RCAME 1/4*32 Single 120º |
| 1 x | Compact on-board starting system (9724) |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Servo HITEC HS-225 MG |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | LOWER TOW HOOK |
| 1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Welder 100W/200V |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Towing hook |
| 1 x | Universal Filter |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Turnbuckle M1,6x20/30 (2pcs) |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | RCEXL Electronic ignition twin CM-6 |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Parachutist |
| 1 x | Wire easy tensioner (red) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Compact on-board starting system (9512) |
| 1 x | Initior Transmitter FTX2 Wireless |
| 2 x | Extension silicon 75 cm (Futaba) |
| 2 x | Extension Arm for Carburetor |
| 2 x | Extension Arm for Carburetor (red) |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | DLE Ignition unit |
| 1 x | wire tensioner (red) |
| 1 x | Smoke set "S" |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Parachute expulsion foam |
| 1 x | SERVO DES 707 BB MG, Pignons |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Turnbuckle M2x29/43 (2pcs) |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Release wax 250ml |
| 1 x | Spray Graphit 33 |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Paint gun for sprays |
| 1 x | 10-15mm Servo Arm |
| 1 x | Partall paste 650 g |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | 20-25mm Servo Arm |
| 1 x | Reed valve for DA 50-R |
| 1 x | Universal Colour Paste deep black 50 g |
| 2 x | DLE 55 carburetor |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Hose clips 6 mm |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Suction funnel for carburetor 90D-M (red) |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Extension silicon 35 cm (Futaba) |
| 1 x | Spannlack 1000 ml |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | 10-15mm Servo Arm HITEC |
| 1 x | Suction funnel for carburetor 90D-L (red) |
| 1 x | 500 ml sealer (DOPE) |
 |
| 6,179.06EUR |
.jpg "COMFORT MOUNT ø 25 mm")
