| 4 x | Extinguisher CO2 - 2 Kg |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | 800TVL CMOS camera for FPV |
| 2 x | USB Mini Camera endoscope |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Nut M2 |
| 1 x | Blades 330mm |
| 1 x | PowerBox iGyro SRS |
| 1 x | Baal link 4/14/4 (5 pcs) |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | DPSI OCP Overload protection |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | OPTOTRONIX Aurora LCU |
| 2 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | 3 blades set |
| 1 x | DUPLEX 2.4EX Central Box 320 |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Allen wheel collar M4x6 |
| 2 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | 45 mm rods + T patellas set for direction control |
| 2 x | Allen wheel collar M3x3 |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Fascination 3600 mm (Top Model) |
| 1 x | Sliding window 1:2,4 / 1.2,6 Scale |
| 1 x | DPSI Micro - RCS |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | GPS, Vario and altitude Sensor SBS-01G |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | DPSI 2001 RV |
| 1 x | GPS Sensor + Logger OPTronics |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | 3,2x1000 mm 2:1 black termoretract tube |
| 1 x | 2,4x1000 mm 2:1 red termoretract tube |
| 1 x | SensorSwitch, red connector wit 200cm ribbon cable |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
| 1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
| 1 x | FUNRAY RR |
| 1 x | Premiant II (Aero-naut) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Robart Door Hinge (Pk2) |
| 1 x | Gates hinge |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (male) |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 1 x | 20 g tin paste |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 2 x | 4,8x1000 mm 2:1 black termoretract tube |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 1 x | IKURA GPS 4.28 m |
| 1 x | TAKEO 3.6m electric |
| 1 x | Prelude ARF 2500 mm (TopModel) |
| 1 x | Ion Pro, Wing joiner (JP Model) |
| 1 x | Oils Pumps Empty (1 liter) |
| 1 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 1 x | Snap short M2 (10 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Motor GAUI F-50 |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Canister combo DLE 111 cc |
| 1 x | KS86 V muffler up to 65cc |
| 1 x | Stainless Steel Muffler D.A. 35-70 |
| 1 x | Motor Saito FG-33 R3, 33 cc |
| 1 x | Motor Saito FG-60 R3, 60 cc |
| 1 x | Motor UMS Radial-5-150cc gas |
| 1 x | Carb spacer mounting block ,red DA-60/70 |
| 1 x | Aluminium carb bend for ZG 45SL |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Ignition for ZG 20/26 |
| 1 x | Cockpit plastic closing |
| 1 x | Silencer with rear exhaust MTW TDH 110 |
| 1 x | Tufnol Choke Lever Arm d=4,7mm |
| 1 x | Giant Scale Muffler D.A. 170 (2 pcs) |
| 1 x | DA-50R Prop Hub |
| 1 x | Motor SAITO FG-61 TS |
| 1 x | Piston EME 35cc |
| 1 x | Motor NGH GT-17 |
| 1 x | ZENOAH ZG26 SCM Marine Engine |
| 1 x | Propeller APC 10x5 Electric |
| 1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R |
| 1 x | Stainless Steel Bend D 20x0,6mm |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
| 1 x | Silencer kit ZG 45/62 |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Cylinder ZG 26SC/SLH |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Carburetor for ZG45SL and ZG62/S/SL |
| 1 x | Ball Bearing Oil 25 ml |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Header ZG 45/62, "normal" |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Motor GAUI F-50R (rear intake) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
| 1 x | Stainless Steel Bend D 12x0,4mm |
| 1 x | L ELBOW 90º ø 25 mm |
| 1 x | Canister combo DLE 120 cc |
| 1 x | Stainless Steel Bend D 25x0,5mm |
| 1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
| 1 x | Pitts Muffler kit for CAP 21 |
| 1 x | Blade Holder Full (4 blades) |
 |
| 23,048.26EUR |
