| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 2 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 3 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 3 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | ORACOVER transparent Yellow (10 m) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Oracover Azul Cielo 2 m |
| 2 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Ply-Span 450x600/13g Blue |
| 4 x | Oracover Yellow CUB 2 m |
| 2 x | 30 cm BEC cable (female) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Ply-Span 450x600/13g Black |
| 2 x | Oracover ROYAL RED 2m |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 2 x | MPX-Dean "T" Adapter |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 3 x | Oracover Green10 m |
| 2 x | Oracover Black 2 m |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | JETImodel SINGLE BEC |
| 1 x | TrainerCord (master-learner) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Oratex Natural White 20m |
| 1 x | CC 03 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | CC 02 |
| 1 x | Oracover Yellow CADMIO 10 m |
| 3 x | Oracover Yellow CUB 10 m |
| 1 x | Ply-Span 450x600/13g Red |
| 1 x | USB HLS prog. interface |
| 2 x | Oratex White 2m |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Connectors DEANS (T) |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 2 x | XH female balance (3S) connector (2 pcs) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | Conector Servo female 4 pines |
| 1 x | 30 cm DEANS female connector |
| 1 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 1 x | MAX pilot ARTF |
| 2 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Para-RC Mix |
| 2 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | Parachute P4 |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Motor KAVAN PRO 2225-1600 |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Horn with ball 40x30 |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Oracover Black 10 m |
| 2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
| 1 x | PVC red battery termo-retract 68 mm (10 m) |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | PVC transparent battery termo-retract 195 mm (1 m) |
| 3 x | SIG Coverall 1.2x4.5 m |
| 2 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | 19 mm 2:1 black termoretract tube |
| 2 x | MAX BEC |
| 1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
| 2 x | PROFICOVER 5m |
| 1 x | Oracover Azul 2 m |
| 2 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 3 x | PVC transparent red battery termo-retract 68 mm (10 m) |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | 4,8x1000 mm 2:1 black termoretract tube |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 3 x | Oracover Yellow CADMIO 2 m |
| 1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
| 1 x | Interruptor RX/Batterie |
| 2 x | Oratex Antik 2m |
| 1 x | PowerBox SparkSwitch RS |
| 2 x | Selfstart electronic switch |
| 1 x | MAX BEC 2D plus EX |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 2 x | Oratex Natural White 2m |
| 1 x | PVC transparent battery termo-retract 85 mm (1 m) |
| 1 x | SPS 70V 100/200 A |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Vasa model Catapult |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | PVC grid straight 290x185x0.32 mm |
| 1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
| 1 x | MPX Sub-D Adaptor |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Male connector for 12 pines AWG |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | SPARK Switch 7.4v |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | DPSI Ampere battery backer |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Female connector for 10 pines AWG |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Short Switch On/Off micro |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | 57 mm INO spinner (carbon imitation) |
| 1 x | SPARK Switch 5.9v |
| 1 x | 6,4x1000 mm 2:1 red termoretract tube |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Spinner 82mm Black ventilado |
| 1 x | Oracover Verde 2 m |
| 1 x | F3A carbon 95 mm spinner |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | Spinner INOVA 102 mm Black |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
| 1 x | Oracover Brown 2 m |
| 1 x | PropCover 16-20" (2 pcs) |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 2 x | Solarfilm Lite blue transp. 5m |
| 1 x | SIG Coverall 1.2x1.8 m |
| 1 x | 3,2x1000 mm 2:1 black termoretract tube |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Tren de cola carbono 50-70cc |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Sprung retractable undercarriage (Alfa model) |
| 1 x | UBEC 6A KAVAN |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | USB interface ALTIS |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Extension 5 lipos JST/C - JST |
 |
| 11,854.91EUR |
