| 1 x | Aramid 50 daN 50 m |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | 1/6 Pilot "John" |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 2 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Extension silicon 100 cm (Futaba) |
| 2 x | Strip 2,0x2,0x330 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 2 x | Round Rod 1,5x1000 mm |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 3 x | ARAMID honeycomb 1300x2600x2 mm |
| 2 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 2 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 2 x | Canopy Latch |
| 2 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 2 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | 3 LiPo XH>EH adapter |
| 2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 2 x | Baseplate servo |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Digital weight, angle and balance meter BASIC |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | 55% silver electrodes (2 pcs) |
| 2 x | Balsa panel 3.0x100x1000 mm |
| 2 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Copier 2x20 cm pcs |
| 2 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Crimping tool |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 2 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Vasa model Catapult |
| 1 x | Extension 7.5 cm |
| 1 x | Premium servo extension 50cm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Altimeter Altis NAO |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Device Terminal |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | 90 mm CFK long Spinner fixed by a central screw |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Circlick securite |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Futaba male 40 cm extension |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Premium servo extension 100cm |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Premium servo extension 75cm |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Telemetry interface ALTIS 6 cm |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Telemetry interface ALTIS to Futaba |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Telemetry interface ALTIS 20 cm |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
| 1 x | 90x45 mm hard foam KOVO wheel |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 1 x | 89 mm aluminium spinner. |
| 1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
| 1 x | 95 mm aluminium spinner. |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
| 1 x | Adap/Exten for Futaba 12-14C |
| 1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
| 1 x | Aero shocks |
| 1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
| 1 x | 82 mm aluminium spinner. |
| 1 x | 80x40 mm hard foam KOVO wheel |
| 1 x | Angle support XT60 conector |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Short extra-strong control horn with bearing 2,8x15 |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Micro control horn T2 Ø 1 |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
| 1 x | Servo FUTABA HPS-A700 Digital S-Bus |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Servo FUTABA S 3072 HV S-Bus |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Vacuum pump 12 CFM |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Servo holder for retract |
| 1 x | Servo Metal Horn 15.5 mm MKS |
| 1 x | Servo MKS 6100 DS |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon |
| 1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Welder 100W/200V |
| 1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
| 1 x | Servo MKS HV747 |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | Servo MKS HBL599 SL |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Servo MKS HV6120H |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
| 1 x | Servo TOPMODEL DS9010 T |
| 1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
| 1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
| 1 x | 90x75 mm standart servo cover |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
| 1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
| 1 x | 11 mm wing servo holder |
| 1 x | 27x10 prop Super Silence |
| 1 x | Propeller POWER-PROP 11x9 |
| 1 x | 6x4 tree blades propeller |
| 1 x | Propeller POWER-PROP 12x6 |
| 1 x | Propeller MASTER 6x4 |
| 1 x | Propeller MASTER 5,5x4 |
| 1 x | 3-blades 28x12 carbon prop Super Silence |
| 1 x | 24x14 prop Super Silence |
| 1 x | 3-blades 27x12 carbon prop Super Silence |
| 1 x | 11x7 tree blades propeller |
| 1 x | 12x8 tree blades propeller |
| 1 x | 3-blades 29x12 carbon prop Super Silence |
| 1 x | Propeller MASTER AIRSCREW 9x6 |
| 1 x | Propeller POWER-PROP 15x10 |
| 1 x | Propeller MASTER 5,5x4,5 |
| 1 x | Propeller POWER-PROP 14x8 |
| 1 x | Propeller MASTER 7x4 |
| 1 x | Helice CLASSIC-Prop 20x10 |
| 1 x | 3-blades 21x12carbon prop Super Silence |
| 1 x | Propeller MASTER 7x3 |
| 1 x | Propeller MASTER AIRSCREW 12x8 |
| 1 x | 24x12 prop Super Silence |
| 1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
| 1 x | Propeller FALCON 27x10 3-BL carbono-gas |
| 1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
| 1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
| 1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
| 1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
| 1 x | Conector FUTABA Servo male (10 pcs) |
| 1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
| 1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Hitec 52 mm servo arm |
| 1 x | Partall paste 650 g |
| 1 x | Female connector for 16 pines AWG |
| 1 x | 45 mm rods set for direction control |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Gates hinge |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
 |
| 12,289.47EUR |
