| 1 x | Motor DLE 170 M- Paramotors |
| 2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 2 x | Motor DLE 200cc Std |
| 2 x | Small Crow DLE-170M |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | 20 mm carbon horn |
| 1 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 2 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 3 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 2 x | Extension silicon 50 cm (Graupner) |
| 3 x | ABS Strip 1.5x8.0x1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BEC 3A FOXY |
| 2 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Horn 5/15 with M2 Bearing |
| 2 x | DPS Switch JR/JR |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | GameCommander USB Universal |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 3 x | Glases Nimbus "Black" |
| 1 x | Green smoke canister 100 g |
| 1 x | 3l Smoke oil |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Ferrita 14x8x5.5 mm |
| 2 x | Ferrita 27x14x7 mm |
| 2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 2 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Green smoke canister 65 g |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 2 x | PCARD Wireless System |
| 1 x | Field folding model stand |
| 1 x | "M" set |
| 1 x | White smoke canister 140 g |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 2 x | Ferrita con funda |
| 1 x | Gates hinge |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 2 x | White smoke canister 65 g |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Carbon plate 350x150x3.0 mm |
| 1 x | Big Crow DLE-170M |
| 1 x | Jodel D.9 BeBe 2.400 mm Kit |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Short Switch On/Off micro |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 2 x | Balsa panel 2.0x100x1000 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 3 x | Glases Innovation Plus |
| 2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | DPSI Ampere battery backer |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Male connector for 20 pines AWG |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | JETImodel Addcap 1640 |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 2 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 2 x | Round Rod 3,0x1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 2 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 2 x | Balsa panel 6.0x100x1000 mm |
| 3 x | Balsa panel 3.0x100x1000 mm |
| 2 x | Strip 2,0x2,0x330 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 2 x | Balsa panel 10x100x1000 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 2 x | Birch plywood plate 600x300x1.5 mm |
| 2 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 2 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 2 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 3 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 2 x | Balsa panel 4.0x100x1000 mm |
| 2 x | Round Rod 1,5x1000 mm |
| 2 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M2-1m |
| 2 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 2 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Aluminium battery holder red |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | BALSA trip 10x10x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 2 x | Battery bed V2_M (black) |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Glases Aspen |
| 2 x | Glases Nimbus |
| 1 x | Glases Flitemaster |
| 2 x | Glases Ace |
| 1 x | Glases Moritz |
| 1 x | |
| 1 x | Smoke set "S" |
| 1 x | Parachute expulsion foam |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Cotton Flocks, bag/ 500 g |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Smoke set "Glider" |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Suncover 100cc Red |
| 1 x | LOWER TOW HOOK |
| 1 x | SERVO HOLDER |
| 1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 2 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 2 x | AC-10 pre-rotacion with motor |
| 1 x | FESTO connector 1/8 Quick 6mm 90º |
| 1 x | T-Hose connector 2-2-2 mm |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Cable set PREMIUM, fuselage/wing |
| 1 x | XTorque CFK Servohebel 38 |
| 1 x | Gear set HITEC HS-81 |
| 2 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | Antonov AN2 Scale 1/6 - 3m |
| 2 x | A/C quality beech plywood 600x300x1.5 mm |
| 2 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Glases Stratus |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | Piñon motor rotor LA-500 |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | 2 piece mounting frame |
| 1 x | Cable set Premium™ MAXI "one4two" |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | 12V Car Adapter |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | 2 piece mounting frame Battery 3200 / 4000 |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | MicroMatch PowerBox |
| 1 x | 30 cm MULTIPLEX female connector |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Charging Extension 50cm for 2 Battery |
| 1 x | FESTO connector M7 barb fitting 6mm |
| 1 x | Y-Hose connector 2-2-2 mm |
| 1 x | Y-Hose connector 3-3-3 mm |
| 1 x | |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | 54 mm Futaba servo arm tandem with ball link |
| 2 x | Hitec 20 mm servo arm |
| 1 x | Hitec 46 mm servo arm with ball link |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Battery bed V2_S (black) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Servo SAVOX SV-1270 TG |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | BlueCom™ Adapter (Android / WP) |
| 1 x | Crimping tool |
| 1 x | Extension for LC-Display 50cm |
| 1 x | Conector JR Servo male (50 pcs) |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | External LED's (2 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Charger 220/110v |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Conector FESTO M3 Quick 3mm 90º |
| 1 x | Quick hose connector 4-3 mm |
| 1 x | FESTO connector M7 Quick 4 mm |
| 1 x | Y-Hose connector 4mm |
| 1 x | Conector FESTO G1/8 Quick 4mm 90º |
| 1 x | FESTO connector M7 Quick 4mm 90º |
| 1 x | Y-Hose connector 4-4-4mm |
| 1 x | Quick hose connector 6-6 mm |
| 1 x | Racor 4/3 mm |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | FESTO Filter 4 mm |
| 1 x | Faucet FESTO |
| 1 x | Starter EM Gear Power 80 |
| 2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Servo HITEC HS-311 |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Hitec 52 mm servo arm |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Servo HITEC D954 TW |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Futaba 52 mm servo arm |
| 1 x | Servo HITEC D131 MW nano |
| 1 x | Servo HITEC D941 TW |
| 1 x | Horn 6/35 with M3 Bearing |
| 2 x | Futaba 25 mm servo arm with ball link |
| 1 x | Hitec 30 mm servo rounded arm |
| 1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
| 1 x | Futaba 30 mm servo arm with M3 ball link |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Servo HITEC D85 MG |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Futaba 38 mm servo arm |
| 1 x | 17 mm servo arm with ball link DES Graupner |
| 1 x | Servo HITEC D645 MW |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | Gear set HITEC HS-56 HB |
| 1 x | Gear set HITEC HS-55 |
| 1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | SkyMaxx 1.550 mm (kit) |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Cabel "Y" 30 cm (Futaba) |
 |
| 19,599.69EUR |
