| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cockpit plastic closing |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | SUS wire 3m (nylon coated) |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Covered closure or fairings |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Xplorer3 anemometro |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 2 x | Flap hinge (6 pcs) |
| 2 x | Gates hinge aluminium (1 pcs) |
| 2 x | Micro flex hinge (12 uds) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 4 x | 15 mm reinforced hinge |
| 2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 2 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 2 x | Motor A2212/13T |
| 2 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 3 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 2 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | Conector Servo female 4 pines |
| 1 x | Optotronix Aurora Plug |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 2 x | XH male balance (4S) connector (2 pcs) |
| 1 x | Connector CAN 15 |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | MPX Sub-D Adaptor |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Futaba Female 40 cm extension |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Spannlack 1000 ml |
| 1 x | Propeller POWER-PROP 15x10 |
| 1 x | Propeller electric carbon 9.5x7 |
| 1 x | Propeller electric carbon 10x7 |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Ply-Span 450x600/13g Yellow |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 2 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Propeller POWER-PROP 14x9 |
| 1 x | Motor SAITO FG-61 TS |
| 1 x | LA500 pilot-seat set |
| 2 x | Xplorer1 anemometro |
| 1 x | Xplorer4 anemometro |
| 1 x | LA500 housing-lower cyclic |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Nut M2 |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Balls 4 mm |
| 1 x | Cierva C30 Elevator |
| 1 x | Servo GO-1013 MG 3.8kg |
| 1 x | Servo DITEX TD2612S |
| 1 x | Turbina KINGTECH K320 G5 |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
| 1 x | Servo DITEX EL0510M |
| 1 x | Crimping tool |
| 1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Glases Aspen |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Set clevis for pull-pull (TY13233 & TY13234) |
| 2 x | 18 mm reinforced hinge |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Pulley brass 4/1,5 (2 pcs) |
| 1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
| 3 x | Long pinned hinge (12 uds) |
| 1 x | Turnbuckle M2x29/43 (2pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Porta Kwik link M4 3 mm (2 pcs) |
| 2 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | KIRA 600-20 6,7:1 |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | KIRA 600-16 |
| 1 x | 80 mm rods set for direction control |
| 1 x | KIRA 600-17 |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | PYRO 800-40 Long Axi |
| 1 x | KIRA 500-26 6,7:1 |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Cable coupler M2 (10 uds) |
| 2 x | Cable coupler M3 (10 uds) |
| 1 x | Pulley brass 6/1,5 (2 pcs) |
| 1 x | Round flex hinge (12 uds) |
| 2 x | Long pinned hinge (6 uds) |
| 1 x | wire tensioner (red) |
| 2 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Turnbuckle M1,6x20/30 (2pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Pull-Pull complet set with CF rudder double servo arm |
| 1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | Protector Connector MPX (1 pair) |
| 1 x | XH male balance (6S) connector (2 pcs) |
| 1 x | MR30 connector male |
| 1 x | MPX screwable clips (5 pcs) |
| 1 x | Jet Afterburner Simulator NF-Jet3 RYS |
| 1 x | LED wire (green - 2pcs) |
| 1 x | Connectors MPX black male |
| 1 x | Connectors DEANS (T) micro |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
| 1 x | NF-3X-80 liner Kit |
| 1 x | Bag connector 2 mm |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 1 x | XH female balance (6S) connector (2 pcs) |
| 1 x | NF-3m Heli Kit |
| 1 x | Electromagnets brake |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 2 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 1 x | ULTIMATUM 2.0 m white |
| 1 x | ULTIMATUM 2.0 m red/black |
| 1 x | ULTIMATUM 2.0 m Red Bull |
| 1 x | ER40eVo set B (20 Kg) |
| 1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
| 1 x | VIPER 1.7 Electric break wheels + structure |
| 1 x | 15x7 tree blades propeller LEFT |
| 1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
| 1 x | Brake disc Electron Retracts |
| 1 x | ER-50eVo Set A [2x ER50 + RB-45] |
| 1 x | A50 Backmountset complete |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 1 x | A40 Backmountset complete |
| 1 x | Esc MasterBasic 55SB |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Axle for motor A50-L |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | A30-M/L/XL Backmountset complete |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | Bearings for motors hacker A50 |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | LA500 rotor head core |
| 1 x | Backmountset complete A40 |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
| 1 x | LA500 Blades |
| 1 x | LA500 ciclic lever |
| 2 x | LA500 tail empennage |
| 1 x | LA500 pre-rotation gear |
| 1 x | Esc MasterBasic 70SB |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | LA500 Autogyro |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Pulley brass 5/1,5 (2 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | Porta Kwik link M3 3 mm (2 pcs) |
| 1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
| 1 x | Servo HITEC HS-5087 MH |
| 1 x | Charger SKY RC e680 |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 2 x | Indoor hinge with servo arm integraded |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Servo HITEC HS-45 HB, servo box |
| 1 x | Servo HITEC HS-125 MG |
| 1 x | Servo HITEC D625 MW |
| 1 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | Servo HITEC HS-5084 MG |
| 1 x | HITEC DPC-11 programmer |
| 1 x | Servo HS-5070 MH Hi Volt |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Gates hinge |
| 1 x | Medium pin type hinge (12 uds) |
 |
| 30,412.89EUR |
