1 x | BALSA trip 2.0x2.0x1000 mm |
3 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
3 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
4 x | Motor DLE 430 cc - Paramotors |
4 x | Motor DLE 200cc Premium Muffler |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
5 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
3 x | Motor DLE 170 M- Paramotors |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
3 x | Small Crow DLE-170M |
3 x | Silent-blocks DLE 170M |
3 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Ferrita 14x8x5.5 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Premium servo extension 75cm |
1 x | Cabel "Y" 15 cm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
3 x | Motor DLE 200cc Std |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
5 x | Beech dowels 2.0 x 1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Balsa panel 2.0x100x1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
2 x | BALSA triangular 6x6x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
4 x | Big Crow DLE-170M |
3 x | Trailing edge BALSA 35x8x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | T-Hose connector 6-6-6 mm |
1 x | Faucet FESTO |
1 x | Quick hose connector 4-4 mm |
1 x | Body for landing gear Ø 4 mm |
1 x | Air pressure gauge |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | LA500 Autogyro |
2 x | Actuador lineal HLS12-100210-7.4v |
1 x | Servo BLS-M55B 61.2kg |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Motor OS 3820-1200 electric |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
4 x | Flap hinge 33x9 mm (6 pcs) |
3 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Landing gear strap large (4 uds) |
1 x | T-Hose connector 2-2-2 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
3 x | Flap hinge (6 pcs) |
4 x | Decorative caps, multicoloured, short |
2 x | Conector JAPAN G2 Set 5 pares |
1 x | Quick hose connector 3-3 mm |
1 x | Canopy Latch |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
5 x | Beech dowels 4.0 x 1000 mm |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
4 x | Coupling bush 5 - 5 mm |
2 x | 28 mm tailwheel unit |
3 x | Foreman, scale 1:32 |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Distanzstück motor OS 120 AX |
2 x | Adjustable brass horn threaded M3 |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Bearing block for noseleg landing gear |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | FIALA Propeller 19x12 Electric |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Antonov AN2 Scale 1/6 - 3m |
1 x | 22x10 prop Super Silence |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Sparkplug ROSSI R8 |
2 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | Receiver Crystal 35 Mc/s Ch 62 |
3 x | Hose clips 6 mm |
1 x | Quick hose connector 6-4 mm |
2 x | MZ-12, 6 Channel HoTT |
1 x | EME 55 cc carburetor WALBRO |
1 x | Sparkplug 1/4-32 |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Spark motor OS nº 8 |
1 x | 12V Car Adapter |
1 x | UHU hart 35 g |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Receiver replacement antenna, approx. 15 |
2 x | Spikes Band (5 m) |
1 x | MZ-18, 9 Channel HoTT |
3 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Sparkplug DLE CM6 |
1 x | Sparkplug Saito 400 |
1 x | Spark motor OS nº 3 |
1 x | Charger 220/110v |
3 x | Aluminium sheet 500x250x0,5mm |
2 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | Foam plastic plates (310x210x2 mm) |
1 x | Propeller hub spacer 8/5.5 |
2 x | POLARON EX 800w charger |
1 x | MZ-10, 5 Channel HoTT |
1 x | Decorative caps, multicoloured |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Mini Infrared Thermomiter |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Charger LiPo Charger4 |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Extension Arm for Carburetor (red) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Variable Flow Smoke Pump System |
|
53,507.82EUR |