2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | TrainerCord (master-learner) |
1 x | BEC 3A FOXY |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Circlick securite |
1 x | Adapter lead MPX/XT60 |
2 x | CM-3 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | CC 05 |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | CC 02 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 30 cm BEC cable (female) |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 4 LiPo XH>EH adapter |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | USB HLS prog. interface |
1 x | 5 LiPo XH>EH adapter |
3 x | 30 cm BEC cable (male) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Adapter lead MPX/EC3 |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Screwdriver for Torx® TX6 |
1 x | 2,0x50 mm allen screwdriver |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | 1/6 Pilot "Garry" |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | Piloto Jet "Red" 1/6 Scale |
1 x | Dust collector for mould cleaning |
1 x | |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | 1/12 Pilot "Cougar" |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Ball Link Plier |
2 x | Piloto JET 1:3,5 |
1 x | Vacuum pump 12 CFM |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Copier 2x20 cm pcs |
1 x | 1/4 Pilot "Mike" |
2 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | Cut tube |
1 x | Vacuum pump P1-N |
1 x | 2,5x60 mm allen screwdriver |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Copier 5x20 cm pcs |
2 x | 1/4 Pilot "Heidi" |
4 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Hot Glue Stick RED |
2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Z Bender - S Type Tool |
1 x | 1/10 Pilot "Jimmy" |
1 x | Crimping tool |
1 x | Hot Glue Stick BLACK |
1 x | Screwdriver for Torx® TX8 |
2 x | |
2 x | 1/6 Pilot "Tony" |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Z Bender - S Type Tool |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Pilot "Anthony" (Slimline) |
1 x | 1/7 Pilot "Japanese" |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
2 x | Hot Glue Stick GREEN |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Oratex Silver 2m |
1 x | Oratex Natural White 2m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Ply-Span 450x600/13g White |
1 x | Oratex Yellow Cub 10 m |
1 x | Oratex Natural White 20m |
1 x | Oracover CARBON Metalic 1 m |
1 x | Oracover ROYAL RED 2m |
1 x | Oracover Verde 2 m |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Oracover CHROME 2m |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Oracover Red 2 m |
1 x | ORACOVER Fluor red (2 m) |
1 x | Ply-Span 450x600/13g Orange |
1 x | Oracover White 2 m |
1 x | Oracover Black 10 m |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Oracover Brown 2 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Extension 90 cm (Futaba) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Tape GFK 38 mm |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | USB Mini Camera endoscope |
1 x | CC 01 |
1 x | 2 LiPo XH>EH adapter |
1 x | MPX-Dean "T" Adapter |
1 x | Tapa estado carga XT-60 (6 pcs) |
2 x | SWTU2 switch |
1 x | Tube support Ø 6mm (10 pcs) |
2 x | PSC 6 |
2 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Support Flush MPX Conector (6 pcs) |
2 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | bavarianDEMON USB cable |
1 x | Extension for SensorSwitch 60cm |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
2 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | PowerBox Signal Amplifier |
1 x | PowerBox iGyro SRS |
2 x | PowerBox Competition SR2 |
1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | PPM Encoder Module |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | LOGO 600 SX (kit) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
2 x | 1/12 Pilot "Fighter" |
1 x | Piloto jet 130 mm |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Heli digital angle measurer |
1 x | Tool for entel |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Pistola termica MH 550 micro |
1 x | Heat Seal Iron |
2 x | 140 mm rods set for direction control |
1 x | 100 mm rods set for direction control |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
4 x | Cap closure 33/23.5mm (2 uds) |
1 x | SPS 70V 100/200 A |
2 x | PowerBox SparkSwitch RS |
2 x | Male/Female prolonguer for Balancer Thunder Power 6S |
2 x | FX three-position switched channel, long |
1 x | MAX BEC |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Interruptor RX/Batterie |
1 x | Extension 5 lipos JST/C - JST |
1 x | Female connector for 16 pines AWG |
2 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Extension 2/3 lipos JST/C |
1 x | DPSI magnetic switch actuator (housing) |
2 x | Allen wheel collar M4x6 |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Cable tie mounts 4.3 (4 uds) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | MAX BEC 2D plus EX |
1 x | Switching module high voltage SXH |
1 x | Female connector for 12 pines AWG |
1 x | SPS Remote switch actuator |
1 x | Micro Switch button |
1 x | EWC6 40 cm wing connector |
1 x | Opto Gas Engine Kill Switch |
1 x | Extension 5 lipos JST - JST/C |
1 x | Long Switch On/Off micro |
2 x | Male Prolonger TP 4/5S |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Extension 5 lipos JST/C |
2 x | Magnetic Interruptor MULTIPLEX |
1 x | SPS 70V 140/280 A |
1 x | Support ECU Xicoy X-45 |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Tank BULL MØ1 4L (CMJets) |
1 x | Fuselage BULL MØ1 2.600mm |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | PowerBox SOURCE |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Pipa 3D BULL MØ1 2.600mm |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | 26x12 prop Super Silence |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | EC-Cutter |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | PowerBUS Lead 30 cm |
1 x | PowerBUS to PWM |
1 x | PowerBUS Lead 200 cm |
1 x | Filter Capacitor JR |
3 x | SPARK Switch 5.9v |
1 x | POWERBOX Magic Jeti Switch |
1 x | PowerBox MagSensor red connector |
1 x | External LED's (2 pcs) |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Logo 400 SE VBar |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Adapter 4,0 mm M6 |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Screw M3x12 (10 pcs) |
1 x | DC Small for MultiLog & UltraLight |
1 x | Set Altimeter SHRead |
1 x | RX external cable for estandar receivers |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | 22x10 prop Super Silence |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | 500 ccm complete gasoline fuel tank |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 28x12 prop Super Silence |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | 24x10 prop Super Silence |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | |
1 x | PowerBUS to BUS |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Silicone black 1,0 qmm wire (100 m) |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | Silicone red 1,0 qmm wire (100 m) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Steel brush wheel with 2.35mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Silicone black 4,0 qmm wire (25 m) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | 1/6 Pilot "Buddy" |
1 x | 1/12 Pilot "Langley" |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | 1/10 Pilot "Jack" |
1 x | Female connector for 20 pines AWG |
1 x | Male connector for 20 pines AWG |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Female connector for 10 pines AWG |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | SPARK Switch 7.4v |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | 90 mm rods + T patellas set for direction control |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
3 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Screw-lock connector M2 (2 uds) |
2 x | Canopy Latch |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | 250 mm / 16 mm Airbrakes |
2 x | Cockpit plastic closing |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Steering arm 16 mm Ø 4 mm |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Electronic switch JETI SP06 Opto |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Tool for entel |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Propeller diller for EME35 and DLE35 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Sealing Iron STANDARD |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Cabling for Fox MDM1 wings |
1 x | DPSI Ampere battery backer |
1 x | Propeller CFK 15x7 |
2 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Prop rubber XS set 4 pieces |
2 x | Three-position switched channel, short |
1 x | Male connector for 16 pines AWG |
3 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Propeller CFK 20x13 "white" |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
3 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller CFK 18x19 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Hacker X-Pro USB interface V2 |
1 x | Propeller CFK 14.5x10 Slim |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Connector Sub-D 2+5 Female |
1 x | Propeller CFK 12.5x6.5 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | Propeller CFK 14x8 |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 16x16 Wide |
1 x | Short Switch On/Off micro |
1 x | SPARK Switch 12v |
1 x | Connector CAN 15 |
1 x | Male connector for 6 pines AWG |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Lead with adhesive (2 pcs) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
3 x | Locking cable tie 4.6x203 (uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Landing gear frontal support 25x32x16 |
1 x | 80 mm rods set for direction control |
1 x | 45 mm rods set for direction control |
1 x | Pushrod octagone 3/2 |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
3 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Snap long M2 (10 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Pushrod octagone 3/2 with coupler M2 |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | One touch canopy lock |
2 x | Covered closure or fairings |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | SUS wire 3m (nylon coated) |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | SD HC 8 GB |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
|
22,060.55EUR |