2 x | Ferrita con funda |
2 x | Ferrita 17x10x6.5 mm |
4 x | Ferrita 14x8x5.5 mm |
1 x | Servo NARO Max Std |
1 x | Ferrita 27x14x7 mm |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Tape GFK 38 mm |
2 x | SE Ring 350 mm (2 pcs) |
2 x | SE Ring 360 mm (2 pcs) |
2 x | Foil for sticking flaps and ailerons |
2 x | SE Ring 250 mm (2 pcs) |
3 x | Ring 320 mm length (5 pcs) |
3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Tape GFK 50 mm |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
3 x | Cinta Goldfix 1m |
3 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 200 mm (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | SE Ring 300 mm (2 pcs) |
1 x | Fail Safe air retract |
1 x | 40 mm air cylinder |
2 x | Marker ties (20 pcs) |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
3 x | 20x200 mm battery rings |
1 x | Quick hose connector 4-4 mm |
3 x | Tape GFK 25 mm |
1 x | Z-shaped servo mount |
1 x | T-Hose connector 6-6-6 mm |
1 x | Y-Hose connector 2-2-2 mm |
1 x | Quick hose connector 6-6 mm |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
2 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | AX-60 starters (5 pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | White smoke canister 140 g |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Skies 2x 335 mm + 1x Esqui 250mm |
1 x | Indoor landing gear set |
1 x | Wheel cover holder Ø 5 mm (2 uds) |
1 x | Body for landing gear Ø 3 mm |
2 x | SE Ring 240 mm (2 pcs) |
2 x | T-Hose connector 3-3-3 mm |
2 x | Y-Hose connector 4mm |
1 x | Y-Hose connector 3-3-3 mm |
1 x | 120x60 mm SLH KOVO wheel |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Distanzstück motor OS 120 AX |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Servo GO-09 9g |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Ball bearing 6002 DLE |
1 x | Gasket set DLE-30 |
1 x | Escape DLE-60 Izda |
1 x | DLE 111 Carb gasket (V1) |
1 x | DLE 55 RA pipe plug |
1 x | DLE 111 pipe plug |
1 x | Body for landing gear Ø 4 mm |
1 x | Racor "Y" 3 mm |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Spikes Band (5 m) |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | MZ-10, 5 Channel HoTT |
1 x | KIRA 600-24 6,7:1 |
1 x | Shaft KPG25 4,2:1 |
1 x | KIRA 600-38 6,7:1 |
1 x | KIRA 600-20 |
1 x | Kontronik Kosmik 30 cm Cable Kit |
1 x | CA Glue (medium) 20g |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | CA Glue fast 20g |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | USB programador GO servos |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Servo GO-1053 MG 20.0kg |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Gasket set DLE-120 |
1 x | Gasket set DLE-55RA |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | DLE 85/111/120 Crankshaft keyway |
2 x | Canister combo DLE 111 cc |
1 x | DLE 55 Ignition unit |
2 x | Canister combo DLE 120 cc |
1 x | Carburetor DLE 170 |
1 x | DLE 85 Ignition unit |
1 x | DLE Ignition 170M |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | Big Crow DLE-170M |
1 x | CILINDER FOR DLE 55RA |
2 x | Canister combo DLE 55 cc |
1 x | DLE 111 Old Crankshaft keyway |
1 x | DLE 55 Muffler |
1 x | DLE Ignition 111/120/170 |
1 x | E_brakes electronics |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | Propeller APC 11x8.5 Electric |
1 x | Quick hose connector 3-3 mm |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
2 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Tap FESTO 6-6 mm |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Propeller APC 10x4.7 SF |
1 x | Propeller APC 10x6 Electric |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Racor 4/4 mm |
1 x | Landing gear strap large (4 uds) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Propeller APC 10x5 Electric |
1 x | KIRA 600-22 6,7:1 |
1 x | Pick up DA50/100/150 |
1 x | O-Ring SAITO FG-60 R3 |
1 x | EVOLUTION 10 GX gasoline motor |
1 x | Piston pin for DA50R/DA100 |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
1 x | Motor Moki S 250 cc 5 cylinders |
1 x | Escape Krumscheid 81-6 hasta 55 cc |
1 x | Stainless Steel Bend D 18x0,5 mm |
1 x | Stainless Steel Bend D 25x0,5mm |
1 x | Motor DLE 35 RA |
1 x | Moki Exhaust Bend 50VT |
1 x | 180° TUBE-ANGLE Ø 25 mm |
1 x | Stainless Steel Bend D 22x0,5mm |
1 x | Silencer with rear exhaust MTW TDH 110 |
1 x | Motor DLE 111 cc |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Piñon motor autostarter 60cc |
1 x | L ELBOW DA-150 "normal" (2 pcs) |
1 x | One Way bearing for EME55 starkit with key |
1 x | Motor Saito FG-36, 36 cc |
1 x | Motor Moki 180 |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | 90° TUBE-ANGLE Ø 28 mm |
2 x | Stainless Steel Muffler D.A. 50/100/120 |
1 x | MOKI S250 Intake Bend |
1 x | Castrol Oil TTS 1l |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | Sensor Ignition RCEXL Universal |
1 x | Screw M4x20 (10 pcs) |
1 x | Motor NGH GT-9 V2 |
1 x | Motor NGH GT-17 |
1 x | EME ignition free wheel |
1 x | Piston EME 35cc |
1 x | Propeller pad and output shaft EME 55/60 cc |
1 x | O-ring Saito FG-73 5cyl |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Motor EME 70 cc |
1 x | Escape O-Ring ZIMMERMANN FG-84/90 R3 |
1 x | Silencer Ring 7-35 |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Motor SAITO FG-61 TS |
1 x | L ELBOW 90º ø 25 mm |
1 x | Carburetor for DA150L/170 |
1 x | Piston ring for DA-85 and DA-170 |
1 x | Motor Saito FG-60 R3, 60 cc |
1 x | Reed valve for DA 50-R |
1 x | Carb Carrier, red DA-150L/170 |
1 x | Motor Saito FG-33 R3, 33 cc |
1 x | Motor Moki S 250 cc 5 cyl with autostarter |
1 x | Motor DA 170 |
1 x | Drilling-template set for Moki engines Moki S150, S180, S215, S2 |
1 x | Exhaust pipe BX 155 Right |
1 x | Motor Moki 100 BVT |
1 x | Regler autostarter MOKIS250 |
1 x | Stainless Steel Bend D 15x0,4mm |
1 x | Escape Moki 100 BVT |
1 x | Motor DA 120 |
1 x | Motor MOKI S 350 cc 7 cylinder |
1 x | Stainless Steel Bend D 28x0,6mm |
1 x | Canister combo DLE 120 cc |
1 x | ESC 40A. Opto starter Kolm |
1 x | Motor DA 85 |
1 x | Ball Bearing Oil 25 ml |
1 x | Motor DLE 85 cc |
1 x | Captador RCEXL para DA |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | Compact Silencer KOLM BX-155 |
1 x | RM-130FSI 4-stroke inline gasoline airplane 3 cylinder |
1 x | Motor DLE 60 cc Twin |
1 x | Motor DLE 20 cc |
1 x | Ignition RM-25V |
1 x | KS86 S-6 muffler up to 65cc |
1 x | Exhaust pipe BX 155 Left |
1 x | Motor DA 100L |
1 x | Motor DLE 20 RA cc |
1 x | Motor DLE 65 cc |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Motor DLE 30 cc V2 |
1 x | Giant Scale Muffler D.A. 170 (2 pcs) |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | Carburator gasket MOKI |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | DA 70 Twin Gas Engine |
|
51,082.97EUR |