| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 2 x | Round Rod 3,0x1000 mm |
| 3 x | Strip ABS 2.0x10.0x1000 mm |
| 2 x | Round Rod 5,0x1000 mm |
| 2 x | Strip 2,0x2,0x330 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 2 x | Round Rod 4,0x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 2 x | Strip 1,5x1,5x330 mm |
| 2 x | Round Rod 1,0x1000 mm |
| 2 x | Strip 3,5x1,75x330 mm |
| 2 x | ABS Strip 1.0x5.0x1000 mm |
| 2 x | Strip ABS 2.0x8.0x1000 mm |
| 2 x | Strip ABS 2.0x5.0x1000 mm |
| 2 x | Round Rod 1,25x1000 mm |
| 2 x | ABS I Strip 20x10x1000 mm |
| 2 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 2 x | Round Rod 6,0x1000 mm |
| 3 x | Round Rod 2,5x1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 3 x | Xplorer2 anemometro |
| 1 x | Xplorer3 anemometro |
| 3 x | Xplorer1 anemometro |
| 3 x | Red smoke canister 65 g |
| 3 x | White smoke bombs AX-60 (5 pcs) |
| 4 x | Parachute expulsion foam |
| 1 x | Yellow smoke canister 140 g |
| 2 x | AX-60 starters (5 pcs) |
| 1 x | Electric rocket starters (6 pcs) |
| 2 x | 3l Smoke oil |
| 2 x | Blue smoke canister 140 g |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Remote electric ignition system |
| 3 x | "S" set for boats |
| 2 x | White smoke canister 140 g |
| 3 x | AX-60 starters (5 pcs) |
| 3 x | Smoke set "S" |
| 2 x | Initior Receiver FRX2 Wireless |
| 3 x | Red smoke canister 100 g |
| 2 x | Parachutist |
| 4 x | White smoke canister 100 g |
| 3 x | Green smoke canister 65 g |
| 1 x | Smoke set "Glider" |
| 2 x | Yellow smoke canister 100 g |
| 3 x | White smoke bombs AX-18 (5 pcs) |
| 3 x | Yellow smoke bombs AX-60 (5 pcs) |
| 2 x | Red smoke canister 140 g |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | Field folding model stand SebArt |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 2 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | 150 Newtons FEMA absorber |
| 1 x | 400 Newtons FEMA absorber |
| 2 x | Mixers smoke bombs AX-60 (5 pcs) |
| 2 x | LED blink wire flashing (green - 2pcs) |
| 1 x | LED blink wire flashing (white - 2pcs) |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | LED wire (green - 2pcs) |
| 1 x | Resistor 3W 5% 2R2 |
| 1 x | LED blink wire flashing (blue - 2pcs) |
| 1 x | Motor A2212/13T |
| 2 x | B4-0 rocket charges (6 pcs) |
| 2 x | PCARD Wireless System |
| 1 x | Angle support XT60 conector |
| 1 x | Jeti Black cap |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Support FUEL DOT V3 |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Air Intake manifold 90° - Large |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Adapter 4,0 mm M8 |
| 1 x | 3 mm Short Prop Adapter M5 |
| 2 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Adapter 4,0 mm M6 |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Bidule 55 2460 mm Cabina |
| 1 x | Astra (Top Model) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | Canopy Astra |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | JETImodel Addcap 820 |
| 1 x | Resistor 3W 5% OR47 |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | DUPLEX 2.4EX RC Switch |
| 1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
| 2 x | A60 Motor Mount Alu complete set |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | LED blink wire flashing (red - 2pcs) |
| 1 x | Crystal Universal RX 35.120 Ch 72 |
| 1 x | GameCommander USB Universal |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Receiver R7008HV comatible FUTABA |
| 1 x | Cover cap drop-shaped paintable 43 mm |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Axle for motor A50-L |
| 1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | Ball Bearings for motor A60-V2 |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | A50 Backmountset complete V3/V4 |
| 1 x | Xplorer4 anemometro |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | Micro Crystal RX 35.010 Ch 61 |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 3 x | Green smoke canister 100 g |
| 3 x | White smoke canister 65 g |
| 1 x | Micro control horn T2 Ø 1 |
| 1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Bearings for motor HACKER C50 |
| 1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
| 1 x | Electric coversion set |
| 1 x | Nut for mounting M6 (4 pcs) |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Cooler motor type 300 |
| 1 x | Nylon Screw M6x40 |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Nylon threaded block M5 (2 uds) |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | Motor mount EDGE 540 48" |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Blue smoke canister 100 g |
| 1 x | Nut for mounting M2 (4 pcs) |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Nylon gear block Ø 5 mm (2 uds) |
| 1 x | Pan Head Screw M2x8 PH |
| 1 x | Nut for mounting M3 (4 pcs) |
| 1 x | Nylon threaded block M6 (2 uds) |
| 1 x | Receiver bed (Blue) |
| 1 x | Motor mount for 1 m models |
| 1 x | Metalic motor holder for class 550-600 |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | "M" set |
| 2 x | Yellow smoke canister 65 g |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | "S" set for planes |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Suncover 100cc Red |
| 1 x | Hacker A30-S Radial Set |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Nut for mounting M5 (4 pcs) |
| 2 x | Motor holder for AC 28/7 |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | |
| 1 x | Size "M" motor holder for class 600 |
| 1 x | Frontal support Speed 280 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Nylon gear block Ø 6 mm (2 uds) |
| 1 x | Nylon Screw M5x30 |
| 1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
| 1 x | Nylon gear block Ø 4 mm (2 uds) |
| 1 x | Size "L" motor holder for class 600 |
| 1 x | Nut for mounting M2,5 (4 pcs) |
| 1 x | Fan for A60 |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | M3/5Diam metal ball link V3 (2 pcs) |
| 1 x | Cooler motor type 280 |
| 1 x | 10 mm gas motor standoff |
| 1 x | Ø 38 mm fiberglass motor-holder for electric motors |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Nylon Screw M4x20 |
 |
| 6,402.13EUR |
