| 2 x | X-RAY Micro QR (Tail Tube) |
| 4 x | Chili F3K 2 wing servo mounted |
| 2 x | Chili Race F3K (aramid nose) |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | X-RAY Micro QR (Rudder) |
| 1 x | Mini DART 2 F3K carbon light 1m Green |
| 1 x | X-RAY Micro QR |
| 1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
| 1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | FOX 2.300 mm V2 PNP (FMS) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | VPP system propeller for AXI VPP motors (spare) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Propeller APC 11x4.7 SF Pusher |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Propeller APC 13x4 Electric |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 2 x | Propeller APC 11x7 SF |
| 2 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Propeller APC 13x6.5 Electric |
| 2 x | BALSA triangular 10x10x1000 mm |
| 2 x | A/C quality beech plywood 600x300x6.0 mm |
| 2 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | Propeller APC 12x3.8 SF |
| 2 x | Long pinned hinge (12 uds) |
| 2 x | Profile ABS triangular 4.0x1000 mm 90º |
| 2 x | Propeller APC 13x4 Electric Pusher |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Rubber profile 8-2 mm 2M |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | PIX Hawk with accesories |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Propeller APC 12x6 SF |
| 2 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Propeller APC 11x5.5 Electric |
| 3 x | Propeller APC 10x5.5 MR Electric multirrotor |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Propeller APC 10x7 SF |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Nitroverdu 500 ml |
| 1 x | Propeller APC 10x4.7 SF |
| 1 x | Gates hinge |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Extension 90 cm (Futaba) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Xplorer4 anemometro |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | Propeller balancer |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Circlick securite |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Black silicone 1,0 qmm wire (50 m) |
| 2 x | Straightened threaded rod M2-1m |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Tail tube RAINBOW |
| 1 x | Blade Holder (3 blades) |
| 1 x | Blade Holder Full (3 blades) |
| 1 x | Ball Bearing Oil 25 ml |
| 1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
| 1 x | FIALA Propeller 23x8 Electric |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | Propeller CFK 13x7.5 |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Propeller APC 5.5x4.5 |
| 1 x | Propeller Pleg CAM Carbon 10.5x6 |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Propeller APC 4.75x4.5 |
| 1 x | Propeller Pleg CAM Carbon 14x6 |
| 1 x | Propeller Pleg CAM Carbon 11x7 |
| 1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
| 2 x | Propeller APC 10x10 Electric |
| 1 x | 11 mm wing servo holder |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | MAX BEC 2 |
| 1 x | UBEC 6A KAVAN |
| 1 x | Field folding model stand SebArt |
| 1 x | PSC 5 |
| 1 x | MAX BEC |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | SPS 70V 100/200 A |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | SPS Remote switch actuator |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | Long Switch On/Off micro |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
| 1 x | Optical RPM Sensor |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Propeller CFK 14x6.5 |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | External LED's (2 pcs) |
| 1 x | Conector JR Servo male (50 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | 2 piece mounting frame Battery 3200 / 4000 |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
| 2 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | Propeller Pleg CAM Carbon 12x5 |
| 1 x | Propeller APC 10x4.7 SF Pusher |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Propeller APC 11x7 Electric |
| 1 x | Propeller Pleg CAM Carbon 14x8 |
| 1 x | Propeller Pleg CAM Carbon 11x6 |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Propeller APC 7x6 SF |
| 1 x | Propeller APC 7x5 Electric |
| 1 x | Propeller APC 10x4.7 |
| 1 x | Propeller APC 14x12 Electric |
| 1 x | Propeller APC 4.7x4.2 |
| 1 x | Propeller APC 14x10 Electric |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Propeller Pleg CAM Carbon 10x8 |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Cable Cargador FUTABA |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | 13 mm wing servo holder |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Fox 4000 mm Airworld,cabina |
| 1 x | LA500 nose |
| 1 x | LA500 pilot-seat set |
| 1 x | LA500 pre-rotation gear |
| 1 x | Ball joint long |
| 1 x | Head core |
| 1 x | Complet landing gear |
| 1 x | FesEx-Uni8 System |
| 1 x | Motor HP 220/30/A3 P4 5:1 |
| 1 x | Fiberglass motor-holder for electric motors |
 |
| 8,205.23EUR |
