| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 2 x | Hobbylite Filler, Balsa colour |
| 2 x | Carbon fiber rod 5.0 mmx1000 mm |
| 2 x | Solvent Plasti Dip 1000 ml |
| 2 x | Nitroverdu 500 ml |
| 2 x | White gelcoat 1 Kg |
| 2 x | Plasti Dip Liquid Tape 429 ml orange |
| 2 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 2 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 2 x | Spray Graphit 33 |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 2 x | Spray EC Red 400ml |
| 2 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Mould Resin P 10 kg |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 2 x | MEKP Harderner 100 g |
| 1 x | |
| 3 x | Presto SF Light Filler styrene-free (420 g) |
| 2 x | Partall paste 650 g |
| 1 x | 20 g tin paste |
| 1 x | 1000 ml sealer (DOPE) |
| 2 x | Hardener P-25, canister 2.5Kg |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 3 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Paint gun for sprays |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 2 x | Brass rod Ø 1.0 mm x 1000 mm |
| 4 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 2 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 2 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | USB HLS prog. interface |
| 2 x | Adapter lead MPX/XT60 |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Blue smoke canister 140 g |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | CM-3 |
| 1 x | Green smoke canister 65 g |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Red smoke canister 100 g |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 4 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | Tailwheel for F3A size |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 2 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Crystal TX 35.050 Ch 65 |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Crystal Universal RX 35.150 Ch 75 |
| 2 x | Tren de cola carbono 50-70cc |
| 1 x | Shaft sleeve LAMA |
| 1 x | Fiberglass landing gear for 140-160 |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 2 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Crystal TX 35.010 Ch 61 |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | MAX BEC 2D plus EX |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | USB interface ALTIS |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | SPS 70V 100/200 A |
| 2 x | resin-hardener L-385 H-385 (1250 g) |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Optical RPM Sensor |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | SPARK Switch 7.4v |
| 1 x | SPS 70V 140/280 A |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Connector CAN 15 |
| 1 x | Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26 |
| 1 x | Flat version carb bend for the ZG 62 |
| 1 x | CC 05 |
| 1 x | DPSI Ampere battery backer |
| 1 x | Canister combo DLE 111 cc |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Motor DLE 130 cc |
| 1 x | Motor SAITO FG-61 TS |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Gasket carburettor/insulator for ZG 38/S/SC |
| 1 x | Circlick securite |
| 1 x | Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Epoxy 5min KAVAN 2x 100g |
| 1 x | Long horn 50x26 |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | UMS radial-engine, 7 cylinder 90ccm, gas |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | Motor DLE 170 cc Twin |
| 1 x | Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R |
| 1 x | Motor Saito FG-73 R5, 72.7 cc |
| 1 x | Header ZG 45/62, "wide" |
| 1 x | Motor DLE 111 cc |
| 1 x | Gasket cylinder / insulator for ZG 38/S/SC |
| 1 x | Motor UMS Radial-7-50cc gas |
| 1 x | BEC 3A FOXY |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Motor Saito FG-33 R3, 33 cc |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260 |
| 1 x | Header ZG 45/62, "normal" |
| 1 x | Insulator block ZG 38/S/SC |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Gearwheel 9724/09 for ZG 45 |
| 1 x | CC 02 |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | ZENOAH G270RC |
| 1 x | ZENOAH ZG 62 SL |
| 1 x | Pick up for motor Moki 250 cc 7 cylinders |
| 1 x | Carburator Moki S 180 |
| 1 x | Junta humo metalica G30 (DLE30/DLE60) |
| 1 x | Spring Clip Ø25 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | L-39 Albatros 138"/3.5m lenght ARF |
| 1 x | O-ring Saito FG-73 5cyl |
| 1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
| 1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
| 1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
| 1 x | Spring clamp for tube Ø50 mm |
| 1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
| 1 x | Set Legs + Wheels with brake ASPIRE |
| 1 x | Cooler motor type 300 |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Ø 28 mm fiberglass motor-holder for electric motors |
| 1 x | Deposito DUBRO 360 ml - 12 oz |
| 1 x | Deposito DUBRO 1800cc-60oz |
| 1 x | Extra hard 250 ccm complete gasoline fuel tank |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 1 x | XTorque CFK Servohebel 38 |
| 1 x | Landing gear axle Ø 8 mm (2 uds) |
| 1 x | Adapter rotula M3 |
| 1 x | Horizontal mounting servo holder |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
| 1 x | Tailwheel for 40/90 size |
| 1 x | HDT Jet Central |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Colador RABBIT |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Crystal Universal RX 35.140 Ch 74 |
| 1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
| 1 x | Cooler motor type 280 |
| 1 x | Crystal Universal RX 35.040 Ch 64 |
| 1 x | Cooler motor type 150 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Size "M" motor holder for class 600 |
| 1 x | Propeller diller for DLE170 |
 |
| 31,101.79EUR |
