| 2 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | ABS I Strip 20x10x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 2 x | Ferrita 17x10x6.5 mm |
| 1 x | Blue smoke canister 100 g |
| 1 x | Blue smoke canister 140 g |
| 1 x | Remote electric ignition system |
| 1 x | Initior Transmitter FTX2 Wireless |
| 2 x | Electric rocket starters (6 pcs) |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Green smoke canister 100 g |
| 1 x | Yellow smoke canister 100 g |
| 2 x | Red smoke bombs AX-60 (5 pcs) |
| 2 x | Green smoke canister 140 g |
| 2 x | White smoke canister 65 g |
| 3 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Red smoke canister 140 g |
| 1 x | Red smoke canister 100 g |
| 1 x | White smoke canister 140 g |
| 2 x | Slave-cable USB Easy Sim |
| 1 x | Red smoke canister 65 g |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Jeti Black cap |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | 30 cm DEANS female connector |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Premium servo extension 25cm |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Softshell Hispano Aviación |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | PowerBox PIONEER incl. microSwitch |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Optotronix X-Carrier |
| 1 x | GameCommander USB Universal |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | SIMtransmitter 6 Mode 2 |
| 2 x | EasyFLY Addon |
| 1 x | SD HC 8 GB |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Silicone red 4,0 qmm wire (25 m) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Silicone red 2,5 qmm wire ( 25 m) |
| 1 x | Silicone black 6,0 qmm wire ( 1 m) |
| 1 x | Silicone red 0,5 qmm wire ( 25 m) |
| 1 x | Yellow silicone 0,5 qmm wire (50 m) |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | CC 02 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Circlick securite |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 2 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
| 1 x | Spinner propeller pleg. 45 mm / 4 mm |
| 2 x | Spinner propeller pleg. 40 mm / 4 mm |
| 1 x | Z Spinner (CN) 35mm |
| 2 x | Spinner fold propeller 50 mm (white spare spinner) |
| 1 x | Z Spinner (CN) 42mm |
| 2 x | Spare white 38-45 mm spinner |
| 1 x | Balls 4 mm |
| 1 x | Cierva C30 spanish decoration Stickers |
| 2 x | Ball joint long |
| 2 x | Spinner propeller pleg. 45 mm / 5 mm |
| 1 x | Spinner fold propeller 38 mm (white spare spinner) |
| 1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
| 2 x | Spinner propeller pleg. 40 mm / 5 mm |
| 1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
| 1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
| 2 x | Spinner propeller pleg. 30 mm / 6,0 mm |
| 3 x | Spare white 38-45 mm spinner |
| 2 x | Spinner propeller pleg. 40 mm / 3,17 mm |
| 1 x | Z Spinner (CN) 38mm |
| 3 x | Spinner propeller pleg. 45 mm / 6 mm |
| 2 x | Spinner propeller pleg. 38 mm / 4 mm |
| 1 x | Turbo light spinner cap white 32mm |
| 1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
| 2 x | Spinner propeller pleg. 33 mm / 5,0 mm |
| 1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
| 1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
| 2 x | White spinner propeller pleg. 50 mm / 6 mm |
| 2 x | Spinner propeller pleg. 30 mm / 2,3 mm |
| 1 x | White spinner propeller pleg. 36 mm / 4 mm |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 2 x | White spinner propeller pleg. 42 mm / 4 mm |
| 3 x | Spinner propeller pleg. 38 mm / 5 mm |
| 2 x | Spinner propeller pleg. 38 mm / 3,17 mm |
| 2 x | Spinner propeller pleg. 30 mm / 4,0 mm |
| 2 x | Spinner fold propeller 50-55 mm (white spare spinner) |
| 2 x | Spinner propeller pleg. 38 mm / 6 mm |
| 2 x | Spinner propeller pleg. 40 mm / 6 mm |
| 1 x | LA500 ciclic lever |
| 2 x | Steering lever |
| 2 x | LA500 nose |
| 1 x | Cierva C30 Body Spain |
| 1 x | LA500 tail empennage |
| 1 x | Head spacer |
| 1 x | Raer wall |
| 1 x | Head core |
| 1 x | Head core bushing |
| 2 x | Motor rotor LA-500 |
| 2 x | LA500 cyclic central part |
| 1 x | Head upper part |
| 1 x | Rotorshape Autogyro |
| 1 x | Blades 330mm |
| 2 x | Head lower part |
| 2 x | LA500 rotor head core |
| 1 x | Head runner |
| 1 x | Rotor Mast |
| 1 x | LA500 Blades |
| 1 x | LA500 housing-upper cyclic |
| 1 x | LA500 rotor head shaft |
| 1 x | Motor wall |
| 2 x | Cierva C30 Elevator |
| 2 x | Washer 2.2×4 |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Neck strap Double V2 |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Battery FUTABA 18MZ |
| 1 x | FUTABA F14 + R168DF + Servo S148 |
| 1 x | Silicone black 1,0 qmm wire ( 25 m) |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Electric spoiler 185 mm (2 pcs) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | XPower XC3522/5 LS |
| 1 x | Bidule 111 3000 mm Canopy |
| 1 x | Motor XPower F2915/12 XLight |
| 1 x | XPower XC4226/12 LS |
| 1 x | Servo arm with 4 mm hole to FEMA 9810A |
| 1 x | Set freno para ruedas Dia. 127 mm |
| 1 x | 300 Newtons FEMA absorber |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
| 1 x | 21x14 Falcon electric carbon prop (64 g) |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
| 1 x | Silicone red 4,0 qmm wire ( 1 m) |
| 1 x | Adapter 4,0 mm M8 |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Silicone black 1,5 qmm wire ( 1 m) |
| 1 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | Canopy Sweet / Siesta |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | XPower XC5030/14 LS |
| 1 x | Electric spoiler 440 mm (2 pcs) |
| 1 x | Spring clamp for tube Ø29 mm ext 1pc |
| 1 x | ALBATROS 3.0 m (orange/white) |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Compact on-board starting system (9715) |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | Compact on-board starting system (9512) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | Restrictor FESTO 3/3 mm |
| 1 x | Compact on-board starting system (9724) |
| 1 x | Metal ring front FEMA |
| 1 x | Landing gear axle Ø 8 mm (2 uds) |
| 1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
| 1 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | 200 Newtons FEMA absorber |
| 1 x | Wheel FEMA 140 mm / 6 mm |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | 150 Newtons FEMA absorber |
| 1 x | Gearwheel 9724/09 for ZG 45 |
| 1 x | Wheel FEMA 178 mm / 8 mm |
| 1 x | Servo holder for retract |
| 1 x | Wheel FEMA 112 mm / 6 mm |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | 400 Newtons FEMA absorber |
| 1 x | Wheel FEMA 152 mm / 8 mm |
| 1 x | Brake for 140 mm wheels |
| 1 x | Compact on-board starting system (9713) |
| 1 x | 20,5x14,5 Falcon electric V2 (40 g) |
| 1 x | Z Spinner (CN) 30mm |
| 1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | Electric coversion set |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Cooler motor type 300 |
| 1 x | Motor mount for 1 m models |
| 1 x | White spinner propeller pleg. 42 mm / 5 mm |
| 1 x | White spinner propeller pleg. 36 mm / 5 mm |
| 2 x | Z Spinner (CN) 40mm |
| 1 x | Spinner 3BL propeller pleg. 65 mm / 4,0 mm |
| 1 x | Spinner plastic red propeller pleg. 30 mm / 3,2 |
| 2 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | Cierva C30 simulated motor |
| 1 x | 10 mm gas motor standoff |
| 1 x | Frontal support Speed 280 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Spinner propeller pleg. 42 mm / 5,0 mm |
| 1 x | Wheel keeper washer |
| 1 x | Gold antispark 4 mm plug |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 1 x | White spinner propeller pleg. 42 mm / 6 mm |
| 1 x | Spinner fold propeller 36 mm (white spare spinner) |
| 1 x | |
| 1 x | Motor holder for AC 28/7 |
| 1 x | Central support Speed 600 |
 |
| 8,979.24EUR |
