1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | One touch canopy lock |
1 x | Painting GHT Lexan Black 150 ml |
1 x | |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Partall paste 650 g |
1 x | USB Mini Camera endoscope |
1 x | Paint gun for sprays |
2 x | Cockpit plastic closing |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
3 x | Stainless steel cable Ø 0.5 mm (10 m) |
4 x | Steering arm 16 mm Ø 4 mm |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 500 ml sealer (DOPE) |
1 x | Spray EC Red 400ml |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Universal Colour Paste white 50 g |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Presto SF Light Filler styrene-free (420 g) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Spray adhesive AEROFIX 2 |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Release wax 250ml |
1 x | Spannlack 1000 ml |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
3 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | 20 g tin paste |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Nitroverdu 500 ml |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Parachute expulsion foam |
1 x | Initior Receiver FRX2 Wireless |
1 x | Smoke set "S" |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Blue smoke canister 140 g |
1 x | Green smoke canister 100 g |
1 x | Electric rocket starters (6 pcs) |
1 x | White smoke canister 140 g |
1 x | AX-60 starters (5 pcs) |
1 x | PCARD Wireless System |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Blue smoke canister 100 g |
1 x | Remote electric ignition system |
1 x | Red smoke canister 65 g |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Angled clevis with threaded rod M3 |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Ball Link Plier |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Hot Glue Stick RED |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
2 x | Hot Glue Stick BLACK |
1 x | Hot Glue Stick GREEN |
1 x | Screwdriver for Torx® TX8 |
1 x | Starter EM Gear Power 250 |
2 x | Cut tube |
3 x | 2,5x60 mm allen screwdriver |
1 x | Screwdriver for Torx® TX6 |
2 x | Z Bender - S Type Tool |
1 x | Ball Link Plier |
1 x | Copier 2x20 cm pcs |
2 x | Digital scale up to 40 kg |
2 x | Copier 5x20 cm pcs |
1 x | Digital precision scale up to 2000 g |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Dust collector for mould cleaning |
2 x | Vacuum pump P1-N |
1 x | Starter Sullivan-STAR 601 |
2 x | 3,0x60 mm allen screwdriver |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Premium servo extension 100cm |
1 x | Futaba Female 40 cm extension |
1 x | Premium servo extension 50cm |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Extension silicon 100 cm (Futaba) |
2 x | Extension 90 cm (Futaba) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Futaba Female 40 cm extension |
1 x | Extension 15 cm (Futaba) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension silicon 30 cm female (Graupner) |
2 x | Extension silicon 30 cm female (Futaba) |
2 x | Cable S.BUS 3 salidas 300 mm |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Circlick securite |
2 x | Extension lead 15 cm Multiplex |
1 x | Futaba male 40 cm extension |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Blades 330mm |
2 x | SD HC 8 GB |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Pushrod octagone 4/3 with coupler M3 |
2 x | Landing gear frontal support 25x32x16 |
2 x | Glow starter with charger 230v |
1 x | Logo 400 SE VBar |
1 x | VTX 477 Carbon Rotorblade |
2 x | Tail boom brace LOGO 480 |
1 x | 800TVL CMOS camera for FPV |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | wire tensioner (blue) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
2 x | Cable coupler M3 (10 uds) |
2 x | Cable coupler M2,5 (2 pcs) |
1 x | 1000 ml sealer (DOPE) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | wire tensioner (black) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Kwik link unmount tool |
1 x | Steel brush wheel with 2.35mm |
2 x | Concave-Convex sandpaper file 13 mm |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Sealing Iron Sleeve STD |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Extension silicon 25 cm (Futaba) |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
2 x | Split pin 1x8 mm (10 uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Split pin 1.6x16 mm (10 uds) |
2 x | Cierva C30 Body Spain |
3 x | Blade holder center |
3 x | Baering 3x8x4 |
1 x | Complet landing gear |
1 x | Carburador SAITO FA-120 4S glow |
1 x | OS 37 SZ-H, Connecting rod |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Crankshaft SAITO 120 4T |
1 x | OS 37 SZ-H, Crankshaft |
2 x | Tail tube RAINBOW |
1 x | Blade Holder Full (4 blades) |
1 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Split M1,2x10 (10 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | SUS wire 3m (nylon coated) |
2 x | Snap short M2 (10 uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Wheel collar 2 mm Ø (4 uds) |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Window mounting channel 5m |
1 x | Blade holder lower |
2 x | Cierva C30 Elevator |
3 x | Cierva C30 spanish decoration Stickers |
1 x | Head upper part |
1 x | Steering lever |
2 x | Nut M2 securing |
1 x | Head lower part |
3 x | Servo Fork |
2 x | Screws flush mount M2 |
1 x | Head core |
1 x | Bearing 3x6x2,5 |
2 x | Baseplate servo |
2 x | RX cabel |
3 x | RX external cable for estandar receivers |
1 x | Motor OS 3820-1200 electric |
1 x | Kavan Car 25% nitro 1l |
1 x | Motor OS MAX 120 AX |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Fuel bottle 500 ccm |
1 x | Threaded coupler M2 (10 uds) |
1 x | DUPLEX MUI 30 Sensor |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | Suport PITOT |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Tool for entel |
1 x | Kit wheel loader 966G II without electrics, without hydrauli |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Sandpaper file 13 mm |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | DUPLEX 2.4 EX MBar |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | DUPLEX 2.4EX RC Switch |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX MRMP Hall EX |
1 x | DUPLEX USB Adapter |
1 x | DUPLEX MUI 50 Sensor |
1 x | DUPLEX 2.4GHz GPS |
1 x | Tool for entel |
1 x | Sub-D Plug Mold |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Round Rod 1.0x3.5 cm |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | wire tensioner (silver) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | wire tensioner (red) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Threaded coupler M3 (10 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Dremel 3000 130W |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Mini Lock Grips 2PCS |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Tube bender |
1 x | Heli blades angle measurer |
1 x | 1,5x50 mm allen screwdriver |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Blade holder upper |
1 x | Nut M1,6 |
2 x | Head lower part New |
1 x | Fuselage Autogyro RAINBOW |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Snap long M2 (10 uds) |
1 x | Race 600 |
1 x | Vacuum pump 12 CFM |
1 x | 200 mm extensión servo HITEC/JR |
1 x | 3 blades set |
1 x | 4 blades set |
1 x | Blade Holder (3 blades) |
1 x | Blade Holder Full (3 blades) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Cockpit metalic closing |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | Pushrod octagone 4/3 |
1 x | Cockpit aluminium closing 5.4g |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Head runner |
1 x | Wheel keeper washer |
1 x | Head spacer |
1 x | Cierva C30 simulated motor |
1 x | Screws M1,6x6 Allen |
1 x | Race 400 7,2 V |
1 x | Race 300 |
1 x | Race 480 |
1 x | Race 650 Johnson motor 7.2v |
1 x | Race 280 |
1 x | Motor class 550 + "M" gearbox 2,85:1 |
1 x | Race 400 6V |
|
14,207.42EUR |