1 x | Conector MR-60 (pareja) |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | USB Adaptor OPTronics |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Mobile Terminal |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Starter EM Gear Power 80 |
2 x | Servo Fork |
1 x | AC-10 pre-rotacion with motor |
1 x | Rudder |
1 x | Washer 2.2×4 |
1 x | Side Plate |
1 x | Blade Holder Full (4 blades) |
2 x | Raer wall |
1 x | Head lower part New |
2 x | Head upper part |
2 x | Carbon plate 350x150x3.0 mm |
1 x | Head spacer |
1 x | Wheel keeper washer |
1 x | Nut M2 |
2 x | Blades 330mm |
1 x | LA500 Autogyro |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Hot Glue Stick GREEN |
1 x | Digital precision scale up to 2000 g |
1 x | Vacuum pump P1-N |
1 x | Starter EM Gear Power 250 |
1 x | Ball Link Plier |
1 x | Dust collector for mould cleaning |
1 x | Z Bender - S Type Tool |
1 x | Screwdriver for Torx® TX8 |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Starter Sullivan-STAR 601 |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Propeller CFK 15x13 Slim |
1 x | ANGEL 48" pp red/blue/white |
1 x | Propeller RF CFK 14.5x14 |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Piloto jet 130 mm |
1 x | Propeller CFK 18x16 |
1 x | Long pinned hinge (6 uds) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
2 x | Interface Jack Adapter IKARUS |
1 x | Propeller balancer |
1 x | Medidor ángulos y/o incidencias |
1 x | Surface Indicator Gauge Small |
1 x | Slave-cable USB Easy Sim |
1 x | 1/12 Pilot "Cougar" |
1 x | Propeller CFK 18x19 |
1 x | Propeller RF CFK 13x7 |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | 1/6 Pilot "Buddy" |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Cap Hispano Aviación |
1 x | Propeller RF CFK 16x8,5 S |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Propeller CFK 14.5x10 Slim |
1 x | ZEUS F3A 2m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | 1/6 Pilot "Cindy" |
1 x | Charger ISDT 608AC 200W |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | 18 mm reinforced hinge |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Futaba 38 mm servo arm |
1 x | Flap hinge (6 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Futaba 30 mm servo rounded arm |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Head runner |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Head core bushing |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Miniature brass strap hinge, 1 m |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Screws M1,6x6 Allen |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | White gelcoat 1 Kg |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Epoxy 10 min 190g |
1 x | Mould Resin P 10 kg |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Balls 4 mm |
1 x | Ball joint long |
1 x | LA500 housing-lower cyclic |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Futaba 38 mm servo arm with ball link |
|
9,313.18EUR |