1 x | Hovercraft sailcloth |
1 x | |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Motor A2212/13T |
1 x | Ballast 700gr OPALE |
1 x | Propadapter for motor A50-V3 |
1 x | 1/4 Pilot "Heidi" |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Support pump Xicoy X45 |
2 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | "Taxi Tank" Fuel Tank |
1 x | Angle support XT60 conector |
1 x | Cable coupler M2x66 (2 uds) |
1 x | 3,0x60 mm allen screwdriver |
2 x | Equipment set XL |
1 x | IKARUS plane |
1 x | DRACO 2.0m landing gear |
1 x | METEOR 1.000 mm kit |
1 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
1 x | Cable coupler M2 (10 uds) |
2 x | Motor mount for 1 m models |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Tape GFK 50 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | 1/7 Pilot "Japanese" |
3 x | Medidor ángulos y/o incidencias |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | EC-Cutter |
1 x | 2,0x50 mm allen screwdriver |
1 x | Piloto JET 1:3,5 |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Oracover Azul Cielo 2 m |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Extension silicon 50 cm (Futaba) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
3 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | 18m Fitting barb |
1 x | Support Filtro FESTO |
3 x | BALSA trip 3.0x3.0x1000 mm |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Profile ABS half cane 8.0x1000 mm |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | 1000 ml sealer (DOPE) |
1 x | Oracover Azul 2 m |
2 x | Futaba male 40 cm extension |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Balsa panel 10x100x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
2 x | A/C quality beech plywood 600x300x5.0 mm |
3 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Straightened threaded rod M2-1m |
2 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Motor ORBIT 20-12 with coolingfan |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
2 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | ER-40eVo Set A [2x ER40 + RB-45] |
1 x | Electron 22 mm Fitting barb |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Starter EM Gear Power 80 |
1 x | Boomerang SPRINT V2 Red/White/Blue |
1 x | Boomerang ELAN STARS & STRIPES Combo |
1 x | Brake disc Electron Retracts |
1 x | ER-40eVo Set B [Complet Set + GS200] |
1 x | Manual Controller |
1 x | BOEING 727, Retract set for Boeing 727 |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | Digital weight, angle and balance meter BASIC |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts) |
1 x | Electromagnets brake |
1 x | Propeller MEJLIK 32x12 EVO |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
2 x | Straightened threaded rod M3 - 1m |
1 x | Tapping Screw M2.2x13 (10 pcs) |
2 x | Extension 100 cm (Futaba) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Propeller MASTER 5,5x4,5 |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | MASTER 16x10 tree blades propeller |
1 x | 15x7 tree blades propeller |
1 x | Propeller POWER-PROP 15x10 |
1 x | Propeller MEJLIK 22x10 |
1 x | Propeller MEJLIK 23x8 CFK |
1 x | Propeller MEJLIK 27x12 TH |
1 x | Propeller VESS 32A |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
2 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
2 x | Cabel "Y" 30 cm (Futaba) |
3 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Small kwik link (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
4 x | Threaded coupler M2 (10 uds) |
2 x | Wheel collar 2 mm Ø (4 uds) |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | de Havilland Vampire (Rc Factory) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Field folding model stand |
2 x | Field folding model stand SebArt |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Kwik link with arm M3xM2xL24 |
1 x | SSPS105 Super Hi-Power servo |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | BALSA triangular 6x6x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | Threaded coupler M3 (10 uds) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | EXTRA 300L 1.2 m Deep Purple |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | wire tensioner (blue) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Extension silicon 35 cm (Futaba) |
1 x | CRACK YAK (Mini) 600 mm |
1 x | EDGE 540 V3 (Superlite) ORANGE |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | White large kwik link (10 pcs) |
1 x | Angle of incidence meter |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | EDGE XL Orange |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | wire tensioner (black) |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Propeller balancer |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Extension 90 cm (Futaba) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Mudguard for 140/165 mm wheels |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Futaba Female 40 cm extension |
1 x | Extension silicon 100 cm (Graupner) |
1 x | 10-15mm Servo Arm |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Surface Indicator Gauge Small |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Wire easy tensioner (silver) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Motor mount for 1200 mm models |
1 x | Extension silicon 100 cm (Futaba) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Cabel "Y" 15 cm |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | wire tensioner (red) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | 20-25mm Servo Arm |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Extension 30 cm (Futaba) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Extension 15 cm (Futaba) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Wire easy tensioner (red) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Propeller balancer |
1 x | 10-15mm Servo Arm HITEC |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Turnbuckle M2x29/43 (2pcs) |
|
16,546.64EUR |