1 x | Kwik link with arm M5xM2,5xL30 |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Angled clevis with threaded rod M3 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Couple M4 for wire (10 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Threaded coupler M3 (10 uds) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
3 x | White large kwik link (10 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Metal ball clevis M3 (10 uds) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Hovercraft sailcloth |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Glases Moritz |
1 x | Glases Stratus |
1 x | Glases Ace |
1 x | Glases Nimbus "Black" |
2 x | Glases Innovation Plus |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Towing hook |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
4 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | LOWER TOW HOOK |
1 x | Tow hook for tug |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Short ball link M3 (6 uds) |
1 x | Ring 320 mm length (5 pcs) |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Extension silicon 30 cm male (Graupner) |
2 x | Ply-Span 450x600/13g Orange |
1 x | Kwik link AL M4 con Clip (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
2 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Glases Nimbus |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Birch plywood plate 600x300x2.5 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
3 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Retract undercarriage |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | Birch plywood plate 600x300x4.0 mm |
1 x | Resistor 3W 5% 2R2 |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Metal clevis M3 (10 uds) |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Oracover Black 2 m |
1 x | Oratex Yellow Cub 10 m |
1 x | Carbon plate 350x150x1.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Landing lights 18 mm (0.71in) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | PIX Hawk with accesories |
1 x | Black large kwik link (10 pcs) |
2 x | Fuel Fittings-Blue |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Blocking screws M6 gas engine |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Support XT60 conector (2 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Support Filtro FESTO |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Check valve V2 |
2 x | Fuel dot V3 (Red) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
2 x | Soporte filtro FESTO (4 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 35 mm gas motor standoff |
1 x | 12 mm floating pad (49 pcs) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
2 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
3 x | Ventus 1:4 set of instruments |
1 x | Support ECU Xicoy X-45 |
1 x | Angle support XT60 conector |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | 45 mm gas motor standoff |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | Soporte grifo FESTO (2 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Fuel dot V3 (Blue) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Fuel dot V3 (Silver) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | 50 mm gas motor standoff |
1 x | Fuel dot Gold color |
1 x | Fuel dot red |
1 x | 30 mm gas motor standoff |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | 40 mm gas motor standoff |
1 x | 10 mm gas motor standoff |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | 25 mm gas motor standoff |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | 5 mm gas motor standoff |
1 x | Tube support Ø 6mm (10 pcs) |
2 x | FPV Station for SE TX-Tray V1 |
1 x | Hacker A30-S Radial Set |
1 x | A50 Motor Mount Alu complete set |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Cooler motor type 400 |
1 x | Motor mount for 1 m models |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Frontal support Speed 280 |
1 x | Cooler motor type 150 |
1 x | A60 Motor Mount Alu complete set |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Prop Holder AXI 41xx V2 |
1 x | Quick hose connector 6-6 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | wire tensioner (red) |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | AXI 2814/12 V2 |
1 x | VM 2020/20 rear |
1 x | AXI 2820/14 V2 |
1 x | AXI 2826/10 V2 |
1 x | AXI 2204 Multicopter |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Quick hose connector 3-3 mm |
1 x | Racor 3/3 mm |
1 x | FESTO connector M7 Quick 6 mm |
1 x | Controller Retract Box ER-200 V2 |
1 x | Quick hose connector 4-3 mm |
1 x | Quick hose connector 4-4 mm |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Racor "Y" 3 mm |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Aluminium ignition bad (red) |
1 x | Skies 2x 335 mm + 1x Esqui 250mm |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | Light System |
1 x | Combo lighting module with covering drop shape |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | AXI 2820/12 V2 Long |
1 x | Small kwik link (10 pcs) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | wire tensioner (silver) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Wire easy tensioner (silver) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Coupling for 5 mm axis |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | wire tensioner (blue) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Optical RPM Sensor |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Racor 2/3 mm |
1 x | 4 blades set |
1 x | Set propellers 5x3 Multicopter (2cw+2ccw) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Resistor 3W 5% OR82 |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | AXI 2217/16 V2 |
1 x | AXI 2826/6 V2 |
1 x | AXI 2217/20 V2 |
1 x | Secraft Fuel system v2, red color |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | SE-M Filter |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Fuel dot V3 (Black) |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | AXI 2212/26 V2 |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Battery bed V2_S (black) |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Deposito SECRAFT V2 1000 ml Gas |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Battery bed V2_M (black) |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | AXI 2820/8 V2 |
|
5,725.11EUR |