1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Canopy Latch |
1 x | MZ-18, 9 Channel HoTT |
1 x | Adjustable brass horn threaded M3 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
3 x | Receiver replacement antenna, approx. 85 |
2 x | Propeller Pleg CAM-Prop 8x6 |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
2 x | Pilot Lotsenboot |
2 x | Flap hinge (6 pcs) |
2 x | Coupling bush 5 - 5 mm |
3 x | Spikes Band (5 m) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | ALPHA 1000mm BL ARTR |
2 x | DIVA cabin cruiser |
2 x | Transmitter GRAUPNER MZ-24 Pro |
2 x | Charger LiPo Charger4 |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | Railing Ø 2mm (20 pcs) |
1 x | Ancla 35 x 22 mm (2 pcs) |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Mounting base Ms 12 mm |
2 x | Wood anchor 30 mm (2 uds) |
1 x | Anchor 50 mm (2 uds) |
1 x | 75 mm |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Ancla Admiralsanker 60 mm (2pcs) |
1 x | Railing L250 mm (10 pcs) |
1 x | Hinge 4x14 mm (20 pcs) |
2 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Antenna 50 mm (2 uds) |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Bandera Frankr 4x6 |
1 x | Ancla 16 mm (2 pcs) |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | La Capitania di Venetia accesories |
1 x | Anchor 25 mm (2 uds) |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | Anchor 80 mm (2 uds) |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
1 x | Set cintas unión paracaídas 145 cm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Ball link M3 (10 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
3 x | 1/12 Pilot "Tom" |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | Support Pitot JETI |
2 x | Ventus 1:4 set of instruments |
2 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | M3 Maxi ball link (2 uds) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Conector FUTABA Servo female (10 pcs) |
2 x | Receiver GRAUPNER GR-16 HoTT |
1 x | 2 mm male connector (2 pcs) with safety connector |
2 x | 1/6 Pilot "Buddy" |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Shirt Hispano Aviación |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Indoor hinge with servo arm integraded |
1 x | Tube support Ø 6mm (10 pcs) |
2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Receiver GRAUPNER GR-12 HoTT |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | 1/7 Pilot "Japanese" |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Straightened threaded rod M3 - 1m |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
3 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Conector Servo female 4 pines |
2 x | Mini Infrared Thermomiter |
1 x | Conector MT-60 (pair) |
3 x | Ball link M3 (10 pcs, flat ball) |
1 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Ball link M3 (6 uds) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | 30 cm DEANS female connector |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | 15 mm reinforced hinge |
2 x | 1/10 Pilot "Jimmy" |
2 x | 1/10 Pilot "Jack" |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Cable coupler M3 (10 uds) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | POLARON EX 800w charger |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Mounting base Ms 8 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Stick coupler Ms 15 mm |
1 x | Propeller hub spacer 8/5.5 |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Oracover Azul Cielo 2 m |
1 x | 800TVL CMOS camera for FPV |
1 x | Ring 320 mm length (5 pcs) |
1 x | LOWER TOW HOOK |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | SC NAVY V15R |
1 x | Horn 6/20 with M3 Bearing |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Cable control set |
1 x | Balsa panel 10x100x1000 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | SERVO DES 707 BB MG, Pignons |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Cable coupler M3 (10 uds) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Quick hose connector 6-4 mm |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Horn 5/10 with M2 Bearing |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Fixed launching hook |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Lancha salvavidas 58 mm (5 pcs) |
1 x | Pilote barandilla 16 mm (10 pcs) |
1 x | Propeller AERO-NAUT M4 45 mm (3 Blades pr) (Left hydropropeller |
1 x | Ojos de buey 13x9x6 mm (20 pcs) |
1 x | Life guard Ø 25,0 mm (2 pcs) |
1 x | 10 mm dogdrive props |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | Picas 12 mm (20 pcs) |
1 x | Komet Pump |
1 x | Propeller AERO-NAUT M4 50 mm (3 Blades pr) (Right hydropropeller |
1 x | Feedthroughs 4 mm |
1 x | Guide capes 20 mm (2 pcs) |
1 x | Liferaft 47 mm |
1 x | Outboard Aqua-Race 50 |
1 x | Pile railing 2D/48 mm (10 pcs) |
1 x | 300x4 mm M4 shaft ship |
1 x | 10 mm portholes (10 pcs) |
1 x | Focos Ms 4 mm (10 pcs) |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | Fox MDM-1 ARF 3.5m Orange |
1 x | LS-8 GFK 6m Glider |
1 x | Fox 4000 mm Airworld,cabina |
1 x | 39,0 mm propeller (rigth propeller) |
1 x | Guide capes 23 mm (4 pcs) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Koffeenagel Holz hell 8 mm (20 pcs) |
2 x | Pile railing 2D/35 mm (10 pcs) |
1 x | Pile railing 2D/16 mm (10 pcs) |
1 x | Housing Ø 11 mm (20 pcs) |
1 x | Propeller 3BL 35 mm M4 plastic Left |
1 x | 29,0 mm propeller (left propeller) |
1 x | 12 mm portholes (10 pcs) |
1 x | Plastic fan 12x35 mm (3 pcs) |
1 x | Pilote barandilla 3D/11 mm (10 pcs) |
1 x | 14 mm portholes (10 pcs) |
1 x | Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück |
2 x | Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück |
1 x | Davit 85 mm (2 pcs) |
1 x | Cleat 20 mm (2 pcs) |
1 x | Davit Ms 35 mm (1 par) |
1 x | Cannon 53/6 mm |
1 x | Boat with oars 110 mm |
1 x | Capstan of plastic 125x72x45 mm |
1 x | Absorver mount set for 5-10 Kg models |
1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Servo FUTABA BLS172 SV |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | 150 Newtons FEMA absorber |
1 x | Servo FUTABA SBL 471 SV |
3 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Propeller CFK 18x17 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Servo FUTABA BLS 276SV |
1 x | Servo FUTABA BLS 272SV |
1 x | Propeller CFK 13x9 |
1 x | Propeller CFK 11x8 |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 17x13 |
1 x | Propeller CFK 16x16 Slim |
1 x | Propeller CFK 18x9 |
1 x | Propeller CFK 15x16 |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | SAVOX SH 1290 MG servo digi |
2 x | Piloto jet 130 mm |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Servo Tester |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Bidule 55 V3 2460 mm |
1 x | Bidule 170 ARF 3.48 m |
1 x | Bearing block for noseleg landing gear |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Blind nut M5 (4 pcs) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Support Filtro FESTO |
1 x | Short ball link M3 (6 uds) |
1 x | SAVOX SH 0255 MG servo |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Servoarm Aluminium SH-82 |
1 x | Kit hydraulic brake |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | SAVOX SH 0254 servo |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Socket head ball link M3 (2 uds) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Servo mounting frame SV-1260MG |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 1/6 Pilot "Cindy" |
1 x | Servo SAVOX SA-1256 TG |
2 x | Ball link M3 RPA's-UAV's |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Servo SAVOX SW-1250 MG digi |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Ball link M1.6 (6 uds) |
1 x | Long ball link M3 (6 uds) |
1 x | Servo SAVOX SB-2290 SG |
1 x | M3 Maxi ball link (2 uds) |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Mini neumatic retract landing gear |
1 x | Neumatic retractable landing gear (Aero-Naut) |
1 x | Fishing boat Jule Fischkutter |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | 1/6 Pilot "John" |
1 x | Professional Servo tester |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Pilot "Goose" (Slimline) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Long ball link M1.6 (6 uds) |
1 x | Servo inverter |
1 x | 1/6 Pilot "Tony" |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Round Rod 1.0x3.5 cm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Bidule 111 3000 mm Canopy |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Distanzstück motor OS 120 AX |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Cap Hispano Aviación |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Metal clevis M3 (10 uds) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Swift S1 De-luxe 3.730 mm |
1 x | Set of buckles and strap, 1:4 scale. |
1 x | ESC ALPHA 60A HV |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Blind nut M6 (4 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Glass fabric 25 g (2 m²) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right) |
1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Ventus 2cx 4.5 m Canopy |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Ventus 2cx 4.5 m Bag canopy |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Furling sail Ms.10mm (5pcs) |
1 x | Motor DLE 200cc Std |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
|
28,167.73EUR |