| 1 x | PIX Hawk with accesories |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 2 x | ABS "T" angle 6.0x6.0x1000 mm |
| 2 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 3 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 2 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 2 x | Profile ABS Square 4 x 1000 mm |
| 2 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 3 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Hovercraft sailcloth |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Jeti Black cap |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Parachute expulsion foam |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | CC 01 |
| 1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Fiberglass plate 350x150x2.5 mm |
| 2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 2 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 2 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 3 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
| 1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 2 x | 89 mm INO spinner (carbon imitation) |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
| 1 x | 16mm Gear-Spotlight, 4W |
| 1 x | F3A carbon 95 mm spinner |
| 1 x | Tube bender |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Z Bender - S Type Tool |
| 1 x | 40 mm white plastic spinner for fixed propeller |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | 45 mm black plastic spinner for fixed propeller |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
| 1 x | Cable adapter iCharger |
| 2 x | A50 Backmountset complete V3/V4 |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 1 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
| 1 x | LiPo Storage Box Type "P" |
| 1 x | Bearings for motors hacker A50 |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | EDF Stream-Fan 110mm kv780 |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | LiPo Storage Box Type "BIG" |
| 1 x | Aluminium battery holder red |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
| 1 x | PowerPack 2.5X2 PRO |
| 1 x | Propeller Pleg CAM-Prop 8x6 |
| 1 x | Propeller set 400 (2R+2L) |
| 1 x | AXI 2204 Multicopter |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
| 2 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | Lense for Spotlights, 20mm |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Spinner plastic white fixed propeller 42 mm |
| 2 x | Spinner plastic white fixed propeller 45 mm |
| 1 x | Falcon Carbon Spinner 82mm for electric motor |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | Release wax 250ml |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
| 1 x | Digital scale up to 40 kg |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | CA Glue (medium) 20g |
| 1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
| 1 x | LOGO 600 SX (kit) |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | LED wire (blue - 2pcs) |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | Film release agent PVA 25 ml |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Bearings for motor HACKER C50 |
| 1 x | Combo RAY C3542-1000 + ESC 60A |
| 1 x | Cooler motor type 300 |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Motor A50-14L Turnado V3 Glider |
| 1 x | KIRA 500-36 6,7:1 |
| 1 x | Motor Mount for Multiplex FunJet |
| 1 x | White smoke canister 140 g |
| 1 x | Combo FOXY C3530-570 + FOXY 80 amp |
| 1 x | FOXY G2 C3530-700 |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | KONDOR 15-92 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor A10-7 L 4,4:1 |
| 1 x | Motor A50-16 S V4 |
| 1 x | PYRO 650-53L EJE LARGO |
| 1 x | Motor A40-10S V4 14-Pole |
| 1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
| 1 x | PYRO 800-48 Long Axi |
| 1 x | Motor A50-12 L V4 |
| 1 x | KIRA 600-30 6,7:1 |
| 1 x | Ø 38 mm fiberglass motor-holder for electric motors |
| 1 x | KIRA 480-38 5,2:1 |
| 1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
| 1 x | Motor A60-6XS V4 28-pole kv370 |
| 1 x | KIRA 400-34 |
| 1 x | Frontal support Speed 600 |
| 1 x | A50 Backmountset complete |
| 1 x | KIRA 600-16 |
| 1 x | QUANTUM II 55 Brushless Motor |
| 1 x | Motor A50-10L Turnado V3 Glider |
| 1 x | PYRO 600-12 |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
| 1 x | KIRA 480-34 |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | KIRA 480-26 5,2:1 |
| 1 x | KIRA FAI 5F5/4s |
 |
| 16,169.28EUR |
