1 x | BALSA leading edge 8x10x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | USB Mini Camera endoscope |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Medidor ángulos y/o incidencias |
1 x | Surface Indicator Gauge Small |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Tailwheel for 20/60 size |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | 1/6 Pilot "Garry" |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Electron 22 mm Fitting barb |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Support pumb/filter Xicoy X45 |
1 x | Servo MKS HBL380 |
1 x | Servo Tester |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Servo SAVOX SA-128S SG |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Propeller balancer |
1 x | WingFix ULTRA Black Edition |
1 x | NF-3XL set |
1 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | NF-3X-350 set |
1 x | Angle of incidence meter |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Allen wheel collar M3x3 |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Cockpit plastic closing |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension 15 cm (Futaba) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Motor A2212/13T |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Horn for flap control (1 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Actuator Electric 25 mm |
1 x | Adapter lead MPX/EC3 |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | Angle measurer |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | 11 mm wing servo holder |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Servo SAVOX SH 0257 MG |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | SAVOX SH 0254 servo |
1 x | 18 mm wing servo holder |
1 x | ALU double servo arm 3 mm shaft |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | 1.2L Kevlar tank for this mini SebArt Jet |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | L39 Mini 1.43m Checa Rep. +elec.L.Gear + 3 Microservos |
1 x | Mini Avanti S 1.4m white/red |
2 x | Mini Avanti S 1.4m yellow/black |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
1 x | 290x4 mm M4 shaft ship |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | 290 mm M5 Prop shaft |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | 6 mm aluminium horn with patella |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | LENTUS Multiplex Propeller 8x6 |
1 x | Bidule 111 3000 mm Canopy |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Canopy Astra |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Propeller APC 13x4 Electric Pusher |
1 x | Propeller POWER-PROP 13x10 |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Servo SAVOX SV-1261 MG |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Gear for D 54 |
1 x | 800TVL CMOS camera for FPV |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | PropCover 16-20" (1 pcs) |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | FunCub NG verde RR |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller electric carbon 9.5x6 |
1 x | Propeller electric carbon 10.5x6 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Propeller APC 10x4.7 SF |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller POWER-PROP 14x10 |
1 x | Propeller APC 13x4 Electric |
1 x | Propeller hub spacer 8/5.5 |
1 x | Propeller APC 13x6.5 Electric |
1 x | Propeller balancer |
1 x | Window mounting channel 5m |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Pushrod octagone 3/2 |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Lense for Spotlights, 20mm |
1 x | 16mm Gear-Spotlight, 4W |
1 x | Servo inverter |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Professional Servo tester |
1 x | Servo SAVOX SA-1258 TG |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
2 x | VIPER JET G2 Esq. 2 Red/White/Silver |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Servo TOPMODEL DS1413 T |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Servo SAVOX SV-1260 MG |
1 x | 50x45 mm micro-mini servo cover |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | HITEC DPC-11 programmer |
1 x | Aluminium servo arm (2 uds) |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | 25 mm carbon servo arm |
1 x | Metal gear set for HS81MG/5082MG |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Fast attachment for servos (25 pcs) |
2 x | VIPER JET G2 Esq. 2 White/Red |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Servos security connector (2 pcs) |
1 x | VIPER JET G2 Esq. 3 Orange/Black |
1 x | Motor OS 3820-1200 electric |
|
23,838.53EUR |