| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 3 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Propeller POWER-PROP 14x9 Izda |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Propeller MENZ-S 19x8 3-Blades |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Glases Flitemaster |
| 1 x | Cut tube |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Propeller balancer |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | GPS Expander Module |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
| 1 x | Pulley brass 5/1,5 (2 pcs) |
| 1 x | F450/550 Quadcopter, landing gear |
| 1 x | Metal clevis M2,5 (10 uds) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Parachute XTRALITE S |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Gates hinge |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Carbon plate 700x550x0.5 mm |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Carbon plate 350x150x5.0 mm |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
 |
| 2,400.97EUR |
