1 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Surface Indicator Gauge Small |
1 x | Field folding model stand SebArt |
1 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Angle measurer |
2 x | Lock washer 2.2 mm (20 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | Lock washer 4.3 mm (20 pcs) |
2 x | Circlik for shaft 2.3 mm (10 pcs) |
3 x | Aluminium wide washer M4 Red (4 pcs) |
2 x | Flat washer 1.7 mm (20 pcs) |
3 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | M3 black washers (4 pcs) |
3 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
3 x | Flat washer 4.3 mm (20 pcs) |
3 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
2 x | Spring lock washer 2.6 mm (20 pcs) |
3 x | Aluminium wide washer M3 blue (4 pcs) |
4 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
3 x | Flat washer 2.2 mm (20 pcs) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Circlik for shaft 1.5 mm (10 pcs) |
3 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
3 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Motor A2212/13T |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Crimping tool |
1 x | Adaptadores carga 6s JST-XH |
1 x | Premium servo extension 50cm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Cabel "Y" 15 cm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Premium servo extension 25cm |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Ventus 1:4 set of instruments |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | 5 line servos wire black (1 m) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Field folding model stand |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Socket Screw M2x3 mm (4 pcs) |
2 x | Hexagonal Nut M3 (10 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
5 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Pan head screw M2x16 PH |
1 x | Lock nut M4 (10 pcs) |
1 x | 1/12 Pilot "Fighter" |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
2 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Lock nut M2.5 (10 pcs) |
1 x | VPP system propeller for AXI VPP motors (spare) |
3 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Metalic nose for PROJETI |
1 x | Vasa model Catapult |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Bungee HLG Premium |
2 x | Hexagonal Nut M1 (10 pcs) |
1 x | Xplorer3 anemometro |
1 x | Jeti Advance Plus Program Card |
2 x | Carbon plate 350x150x3.0 mm |
1 x | Lock nut M2 (10 pcs) |
2 x | Threaded insert M3 (4 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Screw M3x30 (10 pcs) |
2 x | Threaded insert M5 (10 pcs) |
2 x | Screw M2.5x8 (10 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
2 x | Socket Head Screw M2x5 |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Lock nut aluminium M3 (4 pcs) |
2 x | Carbon plate 350x150x1.0 mm |
3 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Threaded insert M6 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Xplorer1 anemometro |
2 x | Turbina JetsMunt VT98 NG |
2 x | Turbina JetsMunt M122 NG |
2 x | Xplorer4 anemometro |
1 x | Turbina JetsMunt M210TS |
1 x | Telemetry adapter JestMunt |
1 x | Turbina JetsMunt M166TS |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
2 x | Servo M2x7/16 screw (4 pcs) |
1 x | FOXY G2 C3530-700 |
1 x | Motor Advance 50-6 |
1 x | Wheel 22 mm |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Wheel 38 mm V2 |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Muffler for Titan ZG 26SC/EI |
1 x | Prop shaft ZG 23SL and ZG 26SC |
1 x | Ignition for ZG 20/26 |
1 x | Extension for SensorSwitch 30cm |
1 x | Smoke Oil Blue 5 l |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Cilinder joint for G230RC/G260RC |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Silencer for ZG22, ZG23, ZG231SLH, G2D96-D |
1 x | Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R |
1 x | Cylinder gasket per 1 for ZG 74B/ZG 80B |
1 x | Crankcase Gasket set for ZG 74 / ZG 80 |
1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
1 x | Ignition module ZG 38/S/SC |
1 x | |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Silencer ZG62, new version |
1 x | Header ZG 45/62, "wide" |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Silencer kit ZG 45/62 |
1 x | Loctite HYSOL 9462 |
1 x | Stainless Steel Silencer side outlet for ZG 20/23/26 |
1 x | Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26 |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Header ZG 45/62, "normal" |
1 x | Cylinder for ZG20 |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Dean "T" - Futaba Adapter |
1 x | Conector JR Servo male (10 pcs) |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | ExtraCA Top |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Central piece 42 mm - 2,5º |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Central piece 47 mm 0º |
1 x | Socket Head Screw M2x12 |
1 x | Screw M4x20 (10 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Central piece 47 mm + 5º |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | Floating M3 washer pad (36 pcs) |
1 x | ECU BL180 Jets Munt |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Hexagonal Nut M4 (20 pcs) |
2 x | Blind nut M6 (4 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Blind nut M4 (4 pcs) |
2 x | Blind nut M3 (4 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
2 x | Blind nut M2 (10 pcs) |
1 x | Blind nut M8 (10 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Central piece 52 mm - 5º |
1 x | Red spinner 40-45 mm |
1 x | entral piece 3Bl 42 mm 0º |
1 x | Spinner propeller pleg. 40 mm / 4 mm |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Central piece 47 mm + 2,5º |
1 x | 40 mm white plastic spinner for folding propeller |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Central piece 42 mm + 5º |
1 x | Central piece 42 mm - 5º |
1 x | Central piece 42 mm 0º |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Socket Screw M3x9 mm |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | 15 mm floating pad (30 pcs) |
|
21,633.61EUR |