1 x | Glases Ace |
1 x | Glases Aspen |
1 x | Glases Flitemaster |
1 x | Glases Moritz |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Glases Nimbus |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Glases Stratus |
1 x | Glases Nimbus "Black" |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Cockpit plastic closing |
4 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | SUS wire 3m (nylon coated) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
3 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | One touch canopy lock |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Canopy Latch |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | ABS tube 6.0x4.0x1000 mm |
2 x | ABS tube 18.0x16.0x1000 mm |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
3 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | ABS tube 16.0x14.0x1000 mm |
2 x | ABS tube 3.0x1.0x1000 mm |
3 x | ABS tube 4.0x3.0x1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Small pinned hinge (12 uds) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
3 x | Long pinned hinge (12 uds) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Micro flex hinge (12 uds) |
2 x | Large flex hinge (12 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Strip 3,5x1,75x330 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | White smoke canister 140 g |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 38 mm fenders (10 pcs) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Covered closure or fairings |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | SCHARNHORST Battleship 1:200 |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 2.0x1.0x1000 mm |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Flap hinge (6 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Small pinned hinge (6 uds) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Long pinned hinge (6 uds) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Aluminium ignition bad (blue) |
2 x | Hovercraft sailcloth |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
2 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Starter EM Gear Power 80 |
2 x | Fiberglass plate 620x540x2,0 mm |
1 x | GLOW 9C + accesories |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Compact on-board starting system (9525) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | DLE 30 complete electronic ignition |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Recess mount-rem. glow plug set |
1 x | DLE Ignition unit |
1 x | Pin hinge 39x20 mm (10 uds) |
2 x | Film release agent PVA 25 ml |
1 x | Fiberglass plate 620x540x0,2 mm |
3 x | Propeller POWER-PROP 7x7 |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Carbon plate 350x150x3.0 mm |
2 x | Fiberglass plate 350x150x1.5 mm |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
2 x | Fiberglass plate 620x540x3,2 mm |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Carbon plate 350x150x0.5 mm |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Distanzstück motor OS 120 AX |
2 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | Strip 1,5x1,5x330 mm |
2 x | Round Rod 3,0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Vacuum pump P1-N |
1 x | Screwdriver for Torx® TX8 |
1 x | Sub-D Plug Mold |
1 x | Tube bender |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Starter Sullivan-STAR 601 |
1 x | Strip ABS 2.0x10.0x1000 mm |
2 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | Round Rod 2,0x1000 mm |
2 x | Round Rod 5,0x1000 mm |
3 x | Tail boom brace LOGO 480 |
1 x | Propeller 3BL 35 mm M4 plastic Left |
1 x | STEUERRAD met. 25 mm |
1 x | Rudder 45 mm |
1 x | Life guard Ø 35,0 mm white/red (2 pcs) |
2 x | Reguladro ACTROCON 60A |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
2 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück |
1 x | Life guard Ø 8 mm (24 pcs) |
1 x | Coupling for 5 mm axis |
1 x | Life guard Ø 25,0 mm (2 pcs) |
1 x | Fan metalic 21 mm |
1 x | Coupling for 3,2 mm axis |
1 x | Mounting base Ms 12 mm |
1 x | 3 mm Leader (L 100 mm) |
1 x | Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | Sheave Pl. 1R. 5 mm |
1 x | Wood anchor 30 mm (2 uds) |
2 x | Housing Ø 6 mm (20 pcs) |
2 x | Feedthroughs 4 mm |
1 x | Propeller 3BL 30 mm M4 plastic Left |
1 x | Coupling for 4 mm axis |
1 x | Soporte barandilla madera 8 mm (10 pcs) |
1 x | wooden stairs (kit) 70 mm |
1 x | Housing Ø 15 mm (20 pcs) |
1 x | Mahagoni 1.0x100x1000 mm |
1 x | Mounting base Ms 8 mm |
1 x | Mounting single stop Ms 10 mm |
1 x | Sheave Pl. 2R. 3 mm |
1 x | Propeller 3BL 30 mm M4 plastic Right |
2 x | Life guard Ø 35,0 mm (2 pcs) |
1 x | Sheave Pl. 1R. 3 mm |
1 x | Soporte barandilla madera 16 mm (10 pcs) |
1 x | Koffeenagel Holz hell 8 mm (20 pcs) |
1 x | Coupling for 2,3 mm axis |
1 x | Rudder 36x60 mm |
1 x | Timon madera 45 mm |
1 x | Plastic fan 12x35 mm (3 pcs) |
1 x | Ventilador (metal dorado) 15 x 34 mm, 2 piezas Ø 15 mm x 34 mm a |
1 x | Soporte con aro 17 mm (10 pcs) |
1 x | Axial ball bearing Ø 5 mm |
1 x | Smoke set "S" |
1 x | TAKELHAKEN Ms 12x10 mm |
1 x | Rudder 30x49 mm |
1 x | Life guard Ø 17,0 mm (10 pcs) |
1 x | Timon Met. 13 mm |
1 x | 12 mm mast holder |
1 x | Timon madera 30 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | LO 100 ARC 3.3m |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Sealing Iron Sleeve PROF |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | LS-8 GFK 6m Glider |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Fiberglass motor-holder for electric motors |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | 18 mm reinforced hinge |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | BU 131 Jugmann Panel Instrum. frontal |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Robart Door Hinge (Pk2) |
1 x | VTX 477 Carbon Rotorblade |
1 x | PPM Encoder Module |
1 x | Combo AM480 T-Motor 650 Kv |
1 x | FIALA Propeller 23x8 Electric |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Propeller APC 10x10 Electric |
1 x | Propeller APC 13x10 Electric |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Propeller APC 10x6 Electric |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
2 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Tube Pitot to PIXHAWK |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Servo Arm aluminium ALU-STAR |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Kardan Black (without pinions) |
1 x | Rubber boat defense |
1 x | Logo 400 SE VBar |
1 x | BLOCK m.Ose Ms vern 12 |
1 x | 10 mm portholes (10 pcs) |
1 x | 29,0 mm propeller (left propeller) |
1 x | 39,0 mm propeller (rigth propeller) |
2 x | 290x4 mm M4 shaft ship |
1 x | Grua Plastico 116 mm |
1 x | Transom 59x46 mm |
1 x | Bronze bearings Ø 4 x Ø 8 x 8 mm |
1 x | EDF 60/25 Mega |
1 x | Turbofan 1000 |
1 x | Small adjustable control horn with bearing |
1 x | 42,0 mm propeller (left propeller) |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | 270 mm 3/3 mm shaft ship |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Escalera gris 5 mm (L 60mm) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Cleat 10 mm (2 pcs) |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Hinges 7x12 mm (20 pcs) |
1 x | Dingi Pl. 26 mm (5 pcs) |
1 x | Transom 40 mm |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Cleat 15 mm (2 pcs) |
1 x | Klumpblock (Plastik), Höhe 8 mm, 1 Rille, 20 Stück |
1 x | 25 mm fenders (10 pcs) |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | 12 mm dogdrive props |
1 x | Escalera gris 12x60 mm |
1 x | Block 21x19 mm (5 pcs) |
1 x | Bandera Frankr 4x6 |
1 x | Anchor 80 mm (2 uds) |
1 x | Block 15x23 mm (5 pcs) |
1 x | Antenna 50 mm (2 uds) |
1 x | Boat with oars 110 mm |
1 x | Brass wire 0.30 mm (25 m) |
1 x | Bronze bearings Ø 5 x Ø 8 x 8 mm |
1 x | Ancla Admiralsanker 60 mm (2pcs) |
1 x | Ancla metal 40 mm (2 uds) |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | 42,0 mm propeller (rigth propeller) |
1 x | EDF Jet-Flex 80 - 8 Kg |
|
16,928.52EUR |