| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | 25 mm reinforced hinge |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Z Bender - S Type Tool |
| 1 x | Dust collector for mould cleaning |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Vacuum pump 12 CFM |
| 2 x | Hot Glue Stick GREEN |
| 2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | |
| 1 x | Ball Link Plier |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 2 x | Ball Link Plier |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Crimping tool |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Crimping tool |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Hot Glue Stick RED |
| 1 x | Copier 2x20 cm pcs |
| 2 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Starter EM Gear Power 250 |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Vacuum pump P1-N |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | 2,5x60 mm allen screwdriver |
| 3 x | Hot Glue Stick BLACK |
| 1 x | Digital scale up to 40 kg |
| 1 x | |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | Oracover Yellow CADMIO 2 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Oracover Red 2 m |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | Oracover CARBON Metalic 1 m |
| 3 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Oracover Black 2 m |
| 1 x | Oratex Antik 2m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Oracover White 10 m |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Ply-Span 450x600/13g Yellow |
| 2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Oratex Natural White 2m |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Oracover Green10 m |
| 1 x | Oracover Azul 2 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | Oracover Brown 2 m |
| 1 x | PROFICOVER 5m |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | LUCAS pilot ARTF |
| 1 x | Para-RC Mix |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 2 x | Paramotor BackPack XXS 2 |
| 2 x | Parachute BACKUP X100 |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Cinta Goldfix 1m |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 3 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 330 mm (4 pcs) |
| 2 x | SE Ring 300 mm (2 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | 20x200 mm battery rings |
| 1 x | Spikes Band (5 m) |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | EasyFLY Addon |
| 2 x | Interface Jack Adapter IKARUS |
| 1 x | GameCommander USB Universal |
| 1 x | Propeller balancer |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Glases Nimbus |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 2 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Roller cutter 28 mm |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Rubber Insert soft, 1 Pcs. |
| 3 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 2 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Heli blades angle measurer |
| 2 x | Sealing Iron Sleeve PROF |
| 1 x | Dremel PERMAGRIT thin lime |
| 3 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Tachometer Hyperion Multi-pala |
| 1 x | Sealing Iron Sleeve STD |
| 2 x | Motor OS 3820-1200 electric |
| 2 x | Sheet Depron Aero 1250x800x3 mm |
| 2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
| 1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
| 2 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Xplorer1 anemometro |
| 2 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | CA Glue fast 20g |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Opale Rucksack |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | USBCOM 5i |
| 2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 3 x | Fiberglass plate 350x150x0.5 mm |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 2 x | HBC 10035-3 32-Bit |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | MAX pilot ARTF |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Air Trap Mounting - 175ml |
| 1 x | LA500 front gear holder |
| 1 x | LA500 ciclic lever |
| 2 x | 280 cc gasoline fuel tank complet |
| 1 x | Servo Arm aluminium ALU-STAR |
| 1 x | Blade holder center GFK 0,5 mm |
| 1 x | Servo Fork |
| 1 x | Deposito DUBRO 360 ml - 12 oz |
| 1 x | 500 ccm gasoline fuel tank |
| 1 x | Screws M1,6x6 Allen |
| 1 x | Check valve V2 |
| 1 x | Screw M3x16 |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | Bungee HLG Premium |
| 1 x | 500 ccm complete gasoline fuel tank |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Tape GFK 25 mm |
| 1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
| 1 x | Pilot LA 500 |
| 1 x | LA500 cyclic central part |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Head runner |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Battery plate |
| 1 x | Head lower part |
| 2 x | Side Plate |
| 1 x | Tail support (2 pcs) |
| 1 x | Steel Screw M1x8 (10 pcs) |
| 1 x | Blue "FUEL VENT" round aluminum overflow socket |
| 1 x | "Taxi Tank" Fuel Tank |
| 1 x | Extra hard 1500 ccm complete gasoline fuel tank |
| 1 x | Deposito combustible tipo "turbina" 330 ml |
| 1 x | Deposito DUBRO 1800cc-60oz |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Interface Realflight Simulator |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | Mold plugs XT-30 |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | Heat Seal Iron |
| 1 x | Dremel 3000 130W |
| 1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
| 1 x | Heli digital angle measurer |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | EC-Cutter |
| 1 x | 25 mm Sandpaper file |
| 1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
| 1 x | Mini Lock Grips 2PCS |
| 1 x | Precision wrench L100 mm |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Propeller diller for DLE170 |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Welder 100W/200V |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
| 1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Heli blades angle measurer |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | Sandpaper file 13 mm |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Propeller diller 5/6,3/8/9 |
| 1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
| 1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Propeller drill jig DA-35/50/60/70 |
| 1 x | Fresa corte diamante Ø 2.7mm (bola) |
| 1 x | 55% silver electrodes (2 pcs) |
| 2 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Mini-handed clamp |
| 1 x | Kwik link unmount tool |
| 1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
| 1 x | Laminating brush 10 mm, pack/ 50 pcs |
| 1 x | MPX 8 pins plug mold |
| 2 x | Llave dinamomterica 74 Z 0 0 21 |
| 1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Tube bender |
| 1 x | Indoor landing gear set |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Sub-D Plug Mold |
| 1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
| 1 x | Tren de cola carbono 50-70cc |
| 1 x | Motor mount for 1 m models |
| 1 x | PYRO 650-53L EJE LARGO |
| 1 x | OS Engine 105HZ-R Heli |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
| 2 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Tool for entel |
| 1 x | Metalic motor holder for class 550-600 |
| 1 x | Motor holder AXI |
| 1 x | 10 mm gas motor standoff |
| 1 x | Frontal support Speed 600 |
| 1 x | |
| 1 x | Hacker A30-S Radial Set |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor HP 220/30/A3 P4 5:1 |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | Tail gear set (60-120 class) |
| 1 x | Ø 28 mm fiberglass motor-holder for electric motors |
| 1 x | PYRO 650-103 Long Axi |
| 1 x | KIRA 600-38 6,7:1 |
| 1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
| 1 x | KIRA 480-26 5,2:1 |
| 1 x | KIRA 600-30 6,7:1 |
| 1 x | PYRO 900-52L |
| 1 x | Motor OS FS 95 AX |
| 1 x | OS GT15 W/E-4040 for airplane |
| 1 x | Motor OS MAX 120 AX |
| 1 x | Carburador OS (Type 40K) 46AXII |
| 1 x | PVC grid straight 290x185x0.32 mm |
| 1 x | Motor OS FS 95 V 4T |
| 2 x | Chopped glass fibre strands 3 mm |
| 2 x | Styrene plate 320x120x1.0 mm |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | OS 37 SZ-H, Connecting rod |
| 1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Tubo silicona transparente 3.5 x 2 mm (1m) |
| 1 x | Motor wall |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Electric Fuel Pump 12v |
| 1 x | Propeller APC 11x3.8 SF |
| 1 x | Propeller APC 11x4.5 Electric Pusher |
| 1 x | PT 22x10 EL Propeller |
| 1 x | Propeller APC 12x10 Glow/Gas |
| 1 x | Propeller APC 11x10 Electric |
| 1 x | Helice APC 14x4 W |
| 1 x | 110x55 mm C SLH KOVO wheel |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | 127x43 Ø6.0 mm aluminium core wheel |
| 1 x | 22m Fitting barb |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
| 1 x | MEKP Harderner 100 g |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
| 2 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Universal Filter |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Head core bushing |
| 1 x | Rotorhead pushrod |
| 1 x | Fuel line plug Large 2 pcs |
| 1 x | Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return |
 |
| 24,629.85EUR |
