| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 2 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 3 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 2 x | Propeller POWER-PROP 14x9 |
| 1 x | Piloto JET 1:3,5 |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 2 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Fiberglass plate 350x150x0.5 mm |
| 3 x | Carbon plate 350x150x2.0 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon plate 350x150x0.5 mm |
| 2 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Fiberglass plate 1200x1000x0,2 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Jeti Black cap |
| 1 x | Set stickers JEEMO "Andy" |
| 1 x | Jeemo Dolly |
| 1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | Parachute XTRALITE S |
| 1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | ESC MEZON 115 Opto |
| 1 x | Spray Graphit 33 |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | BOEING 727, Jet pipe for Boeing 727 |
| 1 x | Ring support P-20 OPUS V-Jet 60mm |
| 1 x | ULTIMATUM 2.0 m red/black |
| 1 x | Tank GFK Opus/JEt 300 ml |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Propeller 12x6 Falcon electric |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Film release agent PVA 25 ml |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | FA27.2×8.9 Prop-2PCS/PAIR |
| 1 x | Landing gear Rocket 400 |
| 1 x | Wings Bags JEEMO |
| 1 x | 18 mm reinforced hinge |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Round flex hinge (12 uds) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon plate 700x550x0.5 mm |
| 1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
| 1 x | Glass Bubbles (0,12 g) 350 ml |
| 2 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Z-shaped servo mount |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
| 1 x | Servo HITEC HS-125 MG |
| 1 x | Gear set HITEC HS-65 HB |
| 1 x | Servo HITEC HS-45 HB, servo box |
| 1 x | Servo FUTABA BLS 276SV |
| 1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
| 1 x | Servo HITEC HS-325 BB |
| 1 x | Air Trap Mounting - 175ml |
| 1 x | Extra hard 750 ccm complete gasoline fuel tank |
| 1 x | Programador FUTABA USB CIU-3 |
| 1 x | Screws set for Hitec MG arms servo |
| 1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
| 1 x | Servo HITEC D625 MW |
| 1 x | double Fuel Dot V2 (silver) |
| 1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
| 1 x | Servo HITEC D85 MG |
| 1 x | Futaba BLS255/272/471SV - Gear Set |
| 1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
| 1 x | Red aluminium servo arm V3-Futaba 1,0inch |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
| 1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
| 1 x | Gear set HITEC HS-225 |
| 1 x | Electronic double valve landing gear |
| 1 x | Blue "FUEL VENT" round aluminum overflow socket |
| 1 x | 1000 ccm gasoline fuel tank |
| 1 x | Deposito DUBRO 1800cc-60oz |
| 1 x | Servo HITEC HS-5585MH |
| 1 x | Futaba 3010 - Gear Set |
| 1 x | Servo HITEC D645 MW |
| 1 x | Servo FUTABA BLS173 SV |
| 1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
| 1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Servo JETI DSHV 3D13T (13 Kg) |
| 1 x | Check valve quick hose connector 4-4 mm |
| 1 x | Servo BMS-4112 |
| 1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
| 1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
| 1 x | aluminium servo arm V2-JR 2,0 inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
| 1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
| 1 x | Red aluminium servo arm V3-Futaba 3,5inch |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
| 1 x | Rudder 2_Tray 3.5~4 inch |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
| 1 x | Servo HITEC HS-311 |
| 1 x | 7.94 x 4.76 mm tygon tube 1 m |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Gear set HITEC D645 MW |
| 1 x | Servo Digital HITEC HS-5065 MG |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | Servo HITEC D131 MW nano |
| 1 x | 18m Fitting barb |
| 1 x | Extra hard 1500 ccm complete gasoline fuel tank |
| 1 x | Servo FUTABA S 3072 HV S-Bus |
| 1 x | Servo FUTABA S 9670 SV |
| 1 x | Servo FUTABA BLS172 SV |
| 1 x | diameter silicone tube for glow |
| 1 x | Bob airtrap set |
| 1 x | Gear set HITEC HS-56 HB |
| 1 x | 500 ccm gasoline fuel tank |
| 1 x | Futaba S9650/9670SV - Upper Case |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Servo HITEC D950 TW |
| 1 x | Deposito combustible tipo "turbina" 330 ml |
| 1 x | Deposito DUBRO 3000cc-100oz |
| 1 x | Double side nipple |
| 1 x | Servo FUTABA S 3071 HV S-Bus |
| 1 x | Servo HITEC HS-45 HB |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
 |
| 19,395.05EUR |
