1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
4 x | Vest clothes Hispano Aviación |
2 x | Shirt Hispano Aviación |
2 x | Cap Hispano Aviación |
1 x | Softshell Hispano Aviación |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Small pinned hinge (12 uds) |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
4 x | Connectors banna oro 6,0 mm (M/F) |
2 x | Universal Colour Paste deep black 50 g |
3 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Tape GFK 25 mm |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | SE Ring 360 mm (2 pcs) |
2 x | Green smoke canister 140 g |
1 x | Universal Colour Paste white 50 g |
1 x | SE Ring 480 mm (2 pcs) |
1 x | White smoke canister 65 g |
2 x | Conector BEC male (10 pcs) |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Tape GFK 50 mm |
2 x | XH male balance (2S) connector (2 pcs) |
1 x | Red smoke canister 65 g |
2 x | ABS tube 4.0x2.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Ply-Span 450x600/13g White |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Propeller balancer |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Oracover light Grey 2m |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | ORACOVER Fluor red (2 m) |
1 x | Field folding model stand SebArt |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Interface Jack Adapter IKARUS |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Dust collector for mould cleaning |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | |
1 x | 1,5x50 mm allen screwdriver |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | 3,0x60 mm allen screwdriver |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | Screwdriver for Hexagon 1,27mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | One touch canopy lock |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | Steering lever |
2 x | Blades 330mm |
1 x | Bearing housing |
2 x | Blade holder upper |
1 x | Nut M1,6 |
1 x | Raer wall |
1 x | Screws M1,6x6 Allen |
2 x | Rudder |
1 x | Fixed launching hook |
2 x | Bearing 3x6x2,5 |
1 x | Head lower part |
2 x | Blade holder center |
1 x | Screws flush mount M2 |
1 x | Balls 4 mm |
2 x | Screw M3x16 |
3 x | Blade holder lower |
2 x | Nut M2 |
1 x | Cierva C30 Body Spain |
2 x | Wheel keeper washer |
1 x | Red smoke canister 100 g |
1 x | Blue smoke canister 100 g |
1 x | Connector CAN 15 |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
2 x | Protector Connector Dean-T (1 pair) |
1 x | Connectors banna oro 8,0 mm (M/F) |
2 x | MPX PCB "6 Pins", 5 pieces |
2 x | MPX PCB "Gender-Changer (5 pcs) |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Red 3m5 mm connector holder |
2 x | Optotronix Aurora Plug |
2 x | Connectors DEANS 4 pins (1 pair) |
2 x | Connectors MPX male |
2 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
2 x | Aluminium sheet 500x250x0,5mm |
3 x | Hose clips 6 mm |
2 x | Decorative caps, multicoloured |
1 x | Receiver replacement antenna, approx. 85 |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
2 x | Transmitter GRAUPNER MZ-24 Pro |
2 x | Yellow smoke canister 140 g |
1 x | White smoke canister 100 g |
1 x | Remote electric ignition system |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | 3l Smoke oil |
2 x | Conector JR Servo male (10 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | 30 cm MULTIPLEX female connector |
2 x | Connectors banna gold 5,5 mm (M/F) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
3 x | Banna gold connector 2,5 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Conector Servo female 4 pines |
2 x | Conector JR Servo male (50 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
3 x | Conector MR-60 (pareja) |
2 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
3 x | Conector JAPAN G2 Set 5 pares |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | Connectors banna oro 4 mm (M/F) |
1 x | Conector JR Servo female (50 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Conector XT-30 (hembra) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | Conector JR Servo female (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | Conector XT-30 (macho) |
1 x | ABS tube 16.0x14.0x1000 mm |
3 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Conector MT-60 (pair) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
2 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
2 x | MPX housing with flange (4 pcs) |
1 x | Gold antispark 5,5 mm plug |
1 x | MPX Support |
2 x | Connectors MPX female |
1 x | Mounting frame MPX female connector |
1 x | Mounting frame MPX male connector |
1 x | MPX Support (2 pcs) |
1 x | Connectors MPX black male |
2 x | Magnetic Connect locking system |
1 x | MPX screwable clips (4 pcs) |
2 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | Connectors MPX black female |
2 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
2 x | Connectors MPX male (PIN double) |
1 x | PIN Connector female (100 pcs) |
1 x | MR30 connector male |
3 x | Gold antispark 4 mm plug |
2 x | MPX PCB "4 Pins", 5 pieces |
2 x | MPX Sub-D Adaptor |
2 x | Connectors MPX female (PIN double) |
2 x | POLARON EX 800w charger |
2 x | 800TVL CMOS camera for FPV |
4 x | Decorative caps, multicoloured, short |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Spikes Band (5 m) |
2 x | Canopy Latch |
2 x | Propeller G-Sonic 20x8 |
3 x | Foreman, scale 1:32 |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
2 x | Propeller hub spacer 8/5.5 |
3 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
2 x | Foam plastic plates (310x210x2 mm) |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | Receiver replacement antenna, approx. 15 |
3 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Flap hinge (6 pcs) |
1 x | Charger LiPo Charger4 |
2 x | Beech dowels 4.0 x 1000 mm |
3 x | USB Mini Camera endoscope |
2 x | Manometer 4 mm |
1 x | Extension silicon 75 cm (Futaba) |
2 x | Welder 100W/200V |
1 x | EC-Cutter |
1 x | |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Lead with adhesive (2 pcs) |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Z Bender - S Type Tool |
1 x | Screwdriver for Torx® TX6 |
1 x | Hot Glue Stick RED |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Starter Sullivan-STAR 601 |
2 x | Screwdriver for Torx® TX8 |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Sealing Iron Sleeve PROF |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Tail support (2 pcs) |
1 x | Blade holder center GFK 0,5 mm |
1 x | Cierva C30 Elevator |
1 x | Towing hook |
1 x | Towing hook <3m |
1 x | Ferrita 17x10x6.5 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Side Plate |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Rotorhead pushrod |
2 x | Complet landing gear |
1 x | Head spacer |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | LA500 housing-upper cyclic |
1 x | Head upper part |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Head lower part New |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Blade Holder Full (3 blades) |
1 x | Ball joint long |
1 x | 3 blades set |
1 x | Blade Holder Full (4 blades) |
1 x | Fuselage Autogyro RAINBOW |
1 x | Blade Holder (3 blades) |
2 x | Bag connector 2 mm |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Contacto macho pin conector (10 pcs) |
2 x | Connectors DEANS (T) |
1 x | AXI 2808/24 V2 Long |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Resistor 3W 5% OR82 |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Battery charging cable XT60 |
3 x | Adjustable brass horn threaded M3 |
1 x | MZ-12, 6 Channel HoTT |
1 x | Reed valve for DA 50-R |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Mini Infrared Thermomiter |
1 x | Servo HITEC HS-5087 MH |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Conector JR Servo female (10 pcs) |
1 x | GPS Altis |
1 x | AXI 2814/10 V2 Long |
1 x | AXI 2820/14 V2 Long |
2 x | MPX screwable clips (5 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Connectors DEANS (T) micro |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Propadapter for motor A50 |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Propadapter for motor A60-V2 |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | MZ-10, 5 Channel HoTT |
2 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | MZ-18, 9 Channel HoTT |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Servo HITEC HS-5084 MG |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
2 x | A50 Motor Mount Alu complete set |
2 x | Conector FUTABA Servo female (10 pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Initior Receiver FRX2 Wireless |
1 x | AXI 2820/14 V2 |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | XT-60 connector (male) |
2 x | XT-30 connector (pair) |
1 x | Servo Connector Brackets (10 pcs) |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
2 x | XH female balance (9S) connector (2 pcs) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | AXI 2808/20 V2 Long |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | AXI 2820/8 V2 |
1 x | AXI 2826/6 V2 Long |
1 x | AXI 2826/8 V2 |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | AXI 2820/12 V2 |
1 x | AXI 2820/12 CYCLONE |
1 x | AXI 2826/10 V2 Long |
1 x | AXI 2820/10 V2 Long |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | AXI 2826/6 V2 |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | XT-60 connector (female) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | A60-6XS V4 28-Pole |
1 x | Bearing block for noseleg landing gear |
1 x | Fan for A60 |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Shaft for A60-L (140mm) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | FesEx-Uni6 System |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
2 x | Coupling bush 5 - 5 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | 28 mm tailwheel unit |
1 x | Axle for motor A50-L |
1 x | JETImodel Addcap 820 |
1 x | Cable adapter iCharger |
1 x | Shaft for A60-L V4 |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | JETImodel Addcap 1640 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | Axle for motor A20-S (3 uds) |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Turbo light spinner cap white 32mm |
1 x | Piston ring for DA-50R and DA-100 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Spring clamp for tube Ø50 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Distanzstück motor OS 120 AX |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Cylinder ZG 26SC/SLH |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Miniature brass strap hinge, 1 m |
1 x | Spring Clip Ø25 mm |
|
13,606.44EUR |