| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 2 x | 30 cm BEC cable (female) |
| 2 x | CC 01 |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BEC 3A FOXY |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 2 x | 30 cm BEC cable (male) |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | CM-3 |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 3 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | USB HLS prog. interface |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | 3 LiPo XH>EH adapter |
| 2 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 3 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | JETImodel SINGLE BEC |
| 2 x | Trailing edge BALSA 35x8x1000 mm |
| 2 x | CC 05 |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 3 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Jeti Black cap |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 2 x | 6 mm aluminium horn with patella |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 2 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Small aluminium horn gold (2pcs) |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Cable control set |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 2 x | Horn 6/35 with M3 Bearing |
| 1 x | Horn 6/20 with M3 Bearing |
| 2 x | Horn with ball 40x30 |
| 2 x | Horn 5/15 with M2 Bearing |
| 2 x | Horn with ball 55x40 |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 2 x | 20 mm carbon horn |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Telemetry interface ALTIS 20 cm |
| 1 x | 4 mm Prop Adapter CN-Spinner |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 2 x | Extension 2/3 lipos JST/C |
| 2 x | 2,3 mm Prop Adapter M5 |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 2 x | Female connector for 6 pines AWG |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | SPS Remote switch actuator |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 2 x | SyRen 10A 6V-24V Regenerative Motor Driver |
| 1 x | Gracia (Top Model) |
| 1 x | X-RAY Micro QR (Rudder) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | FANTASY ARF 3.0m, Fundas alas |
| 1 x | Avia (Top Model) |
| 1 x | Astra wing Joinner (Top Model) |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | DELPHIN Race 3.6m c64 |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Control horn long w/ball |
| 1 x | CC 02 |
| 1 x | Servo SAVOX SB-2290 SG |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | Servo SAVOX SV-0236 MG HV |
| 1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 2 x | Rudder forward 80x28 "type Kato" |
| 1 x | Long horn 50x26 |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Horns indoor |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Servoarm SH-81, two sides, aluminium |
| 1 x | Alu servo arm double RHINO |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Servo JETI DSHV 3D13T (13 Kg) |
| 1 x | Savox Brushless Servo SB-2271SG |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Piñones SAVOX SH-0350 |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Servo RHINO pro SHV digi 4 |
| 1 x | Extra long horn 60x30 |
| 1 x | MAX BEC |
| 1 x | CC 03 |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Adapter 3,0 mm M8 |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | SPARK Switch 7.4v |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | Selfstart electronic switch |
| 1 x | Female connector for 16 pines AWG |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | PSC 6 |
| 1 x | USB interface ALTIS |
| 1 x | Circlick securite |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Interruptor RX/Batterie |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | TrainerCord (master-learner) |
| 1 x | PSC 5 |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Adapter 3,2 mm M6 |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Adapter 4,0 mm M8 |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Rudder forward 90x28 "type Kato" |
| 1 x | Small control horn with bearing (2 pcs) |
 |
| 5,105.50EUR |
