1 x | Fiberglass plate 620x540x0,2 mm |
1 x | CRACK YAK (Mini) 600 mm |
3 x | Motor DLE 200cc Std |
2 x | Micro Tarjeta SD Rapid Rush 16 GB |
2 x | Manual Controller |
4 x | Small Crow DLE-170M |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Battery LiPo TATTU 1300 mAh 4S 14,8V 75C |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | ACTIVE ARF Electric 1.995 mm |
2 x | Silent-blocks DLE 170M |
1 x | LUCAS pilot ARTF |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Aluminium servo arm (2 uds) |
1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
2 x | Motor DLE 200cc Premium Muffler |
2 x | Wing OXY 0,5 pulgadas2 |
2 x | Motor DLE 430 cc - Paramotors |
1 x | Suport PITOT |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Futaba Radio Case |
1 x | Cable video GoPro |
1 x | Para-RC Mix |
1 x | PowerBox 12 |
1 x | Strut Set HAWKER HUNTER 1:5,8 (without wheels) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Windsock Ozone L - 700 mm |
2 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | MXS-C (Mini) Blue |
1 x | Compact on-board starting system (9724) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Bags de Luxe ULTIMATUM 2.0 |
2 x | Brake disc Electron Retracts |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | DINO Glider ARC |
2 x | Wing OXY 5,0 m2 |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Miss ULTIMATE 50E Yellow/Black |
1 x | TX 250 mW especial GOPRO |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Cable video GoPro and 5V cable |
2 x | Motor DLE 170 M- Paramotors |
1 x | Opale Rucksack |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Intairco CMB Super Filter - 6mm Barb |
1 x | Paramotor Trike XL |
1 x | Piston ring for DLE-20 RA |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | Kit repair carburator DLE-170 |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Parachute PV6 for F3J |
2 x | Electromagnets brake |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | RB-45 Electronic |
1 x | Motor OS 3820-1200 electric |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | Big Crow DLE-170M |
1 x | PIX Hawk with accesories |
1 x | Propeller RABOESCH.Ms 20mm/M3r 5-BL (rigth hydropropeller) |
1 x | Miss ULTIMATE 50E Red/Black |
1 x | Parachute BACKUP X100 |
1 x | Ferrita 27x14x7 mm |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Ferrita 17x10x6.5 mm |
2 x | Ferrita con funda |
1 x | Cooler motor type 400 |
2 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | SCHARNHORST Battleship 1:200 |
2 x | Indoor motor holder |
1 x | Motor mount for 1200 mm models |
2 x | Size "L" motor holder for class 600 |
2 x | Cables suitable for the motor AC 28/7 |
1 x | |
2 x | Fan for A60 |
1 x | Size "M" motor holder for class 400 |
1 x | Cooler motor type 150 |
1 x | Motor Mount for Multiplex FunJet |
1 x | Motor holder for AC 28/7 |
1 x | Frontal support Speed 280 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Motor mount M |
1 x | 10 mm gas motor standoff |
1 x | Size "M" motor holder for class 600 |
1 x | Receiver bed (Blue) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | AXI 2808/24 V2 Long |
1 x | AXI 2826/10 V2 |
1 x | AXI 2826/10 V2 Long |
1 x | AXI 2814/6D V2 |
1 x | AXI 2808/16 V2 Long |
1 x | AXI 2826/8 V2 Long |
1 x | AXI 2808/20 V2 |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | AXI 2814/12 V2 |
1 x | VBar Control Touch, midnight black |
1 x | AXI 2212/26 V2 |
1 x | AXI 2217/20 V2 |
1 x | AXI 2814/10 V2 Long |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | AXI 2808/20 V2 Long |
1 x | AXI 2217/16 V2 |
1 x | AXI 2814/16 V2 |
1 x | AXI 2808/24 V2 |
1 x | AXI 2826/12 V2 Long |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | PPM Encoder Module |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | PIT (Aero-Naut) |
1 x | TWIST planeador gomas |
1 x | 2,5x60 mm allen screwdriver |
1 x | Z Bender - S Type Tool |
1 x | Ball Link Plier |
1 x | Screwdriver for Torx® TX6 |
1 x | 1,5x50 mm allen screwdriver |
1 x | Dust collector for mould cleaning |
1 x | Hot Glue Stick BLACK |
1 x | 2,0x50 mm allen screwdriver |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Copier 2x20 cm pcs |
1 x | Starter EM Gear Power 250 |
1 x | Digital scale up to 40 kg |
1 x | Hot Glue Stick RED |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Copier 5x20 cm pcs |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Vacuum pump 12 CFM |
1 x | Screwdriver for Torx® TX8 |
1 x | Ball Link Plier |
1 x | |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Crimping tool |
1 x | Z Bender - S Type Tool |
1 x | Shaft KPG25 4,2:1 |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Smoke set "Glider" |
1 x | Mounting base Ms 8 mm |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | SUPER DIMONA TC-80 |
1 x | Turbine KingTech K30G Restart |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Set propellers 10x4.5 SF Carbon Multicopter |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | CAM-Carbon Light Prop 13x6" (Prop right) |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | CAM-Carbon Light Prop 10x7" |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | CAM-Carbon Light Prop 12x5" (Prop left) |
1 x | Metalic motor holder for class 550-600 |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
1 x | Propeller RF CFK 16x8,5 S |
1 x | A50 Motor Mount Alu complete set |
1 x | Propeller MEJLIK 26x12 N-3 Blades |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 11x8 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | GS-200 Electronic |
1 x | Propeller CFK 15x16 |
1 x | Propeller MEJLIK 28x10 |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Bearings for motor HACKER C50 |
1 x | Body for landing gear Ø 3 mm |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Fail Safe air retract |
1 x | Propeller CFK 14x6.5 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | Propeller CFK 13x9 |
1 x | Propeller RF CFK 14.5x14 |
1 x | Air pressure gauge |
1 x | Propeller CFK 20x13 |
1 x | Propeller CFK 20x13 "white" |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | 10-15mm Servo Arm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
|
49,106.21EUR |