| 1 x | Servo HITEC HS-65 HB |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 2 x | Medidor ángulos y/o incidencias |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cockpit metalic closing |
| 1 x | Gear for D 200 BX |
| 1 x | Gear for D 54 |
| 1 x | Servo Dymond D 37 Eco |
| 1 x | Gear for MICRO BB |
| 2 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | 40 mm servo arm with bearing (2 pcs) |
| 1 x | Futaba male 40 cm extension |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Xplorer1 anemometro |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Transmitter JETI Duplex DS-12 EX Multimod BLACK |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | XT-30 connector (pair) |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Tape GFK 38 mm |
| 1 x | 45 mm rods set for direction control |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Silicone black 0,5 qmm wire ( 25 m) |
| 1 x | Glases Aspen |
| 1 x | Oracover Black 2 m |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Gates hinge |
| 1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
| 1 x | Miss ULTIMATE 50E Red/Black |
| 1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 2 x | ABS tube 5.0x3.0x1000 mm |
| 2 x | Ball link duraluminium M3 V1 (10 pcs) |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 2 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 2 x | Balsa panel 10x100x1000 mm |
| 2 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Motor DLE 200cc Premium Muffler |
| 2 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | Servo DITEX TD2612S |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | CC 01 |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | 6,4x1000 mm 2:1 red termoretract tube |
| 1 x | Cinta Goldfix 1m |
| 1 x | Me-163 |
| 1 x | Blind nut M5 (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
| 1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | 89 mm double servo arm with bearing (2 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Aluminium M2x12 mm screw (4 pcs) |
| 1 x | 3,2x1000 mm 2:1 black termoretract tube |
| 1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Extension silicon 10 cm (Graupner) |
| 1 x | M2 5Diam black ball link V2 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Pitts Mufflers EME 70 cc (2 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Oracover Azul 2 m |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Servo HITEC HS-5625 MG Digi |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Angle of incidence meter |
| 1 x | Servo HITEC HS-325 BB |
| 1 x | Servo arms set HS-65HB/MG/5065MG |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | Servo HITEC HS-225 MG |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Propeller balancer |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Servo SAVOX SV-1260 MG |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Glases Stratus |
| 1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Ferrita con funda |
| 1 x | XT-90 connector (pair) |
| 1 x | Metal gear set for HS81MG/5082MG |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Field folding model stand SebArt |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Big Crow DLE-170M |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Servo Mount S (red) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Extension silicon 25 cm (Futaba) |
 |
| 10,441.43EUR |
temporarily out of stock
under request
