| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 3 x | Ventus 1:4 set of instruments |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | CM-3 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Adapter lead MPX/XT60 |
| 2 x | CC 03 |
| 1 x | Cabel charger transmitter GRAUPNER |
| 2 x | 30 cm BEC cable (male) |
| 1 x | CC 02 |
| 1 x | USB HLS prog. interface |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | 30 cm DEANS female connector |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Baseplate servo |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Oil FUCHS 1 liter |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | USB interface ALTIS |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | Ball link M3 (6 uds) |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Set Altimeter SHRead |
| 1 x | PSC 5 |
| 1 x | PSC 6 |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Spare Shaft Ø4mm L:450x23mm M4 |
| 1 x | Kardan Black (without pinions) |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
| 1 x | 270 mm 3/3 mm shaft ship |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
| 1 x | Rudder 107-06 |
| 1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
| 1 x | 290 mm M5 Prop shaft |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Spare Shaft Ø4mm L:450x18mm M4 |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | 290 mm M4 7/8x212 mm shaft ship |
| 1 x | Spare Shaft Ø6mm L:450mm M5 |
| 1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
| 1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
| 1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
| 1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
| 1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
| 1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
| 1 x | Glass Bubbles (0,12 g) 350 ml |
| 1 x | |
| 1 x | Cotton Flocks, bag/ 500 g |
| 1 x | MEKP Harderner 100 g |
| 1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
| 1 x | Gates hinge |
| 1 x | Bags wings/rudder ODYSSEY |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 2 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Ball Link Plier |
| 1 x | Cyano SUPER - GOLD™ (12g) |
| 1 x | White gelcoat 1 Kg |
| 1 x | Female connector for 6 pines AWG |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | Hitec 20 mm servo arm |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
| 1 x | Futaba 46 mm servo arm with ball link |
| 1 x | Xoar Electric Beechwood Prop 12x6 |
| 1 x | Cable Cargador FUTABA |
| 1 x | Bags wings/rudder ASPIRE |
| 1 x | Bags de Luxe ASPIRE |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
 |
| 7,655.70EUR |
