| 1 x | Xplorer2 anemometro |
| 1 x | Xplorer3 anemometro |
| 1 x | Xplorer1 anemometro |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 2 x | Oracover Verde 2 m |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 2 x | Monokote ROJO misil (1.8x0.65m) |
| 2 x | Oracover Brown 2 m |
| 2 x | Ply-Span 450x600/13g Yellow |
| 2 x | Oratex Natural White 20m |
| 1 x | Oratex Natural White 2m |
| 1 x | Oracover White 10 m |
| 1 x | Oratex Antik 2m |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Oracover Yellow CADMIO 10 m |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 2 x | Medidor ángulos y/o incidencias |
| 1 x | Angle measurer |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 3 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 2 x | ARAMID honeycomb 1300x2600x2 mm |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Vasa model Catapult |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | Parachutist |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 3 x | Motor OS 3820-1200 electric |
| 1 x | PVC transparent battery termo-retract 85 mm (1 m) |
| 1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
| 1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
| 1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
| 1 x | Ply-Span 450x600/13g Black |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | 4,8x1000 mm 2:1 black termoretract tube |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | SIG Coverall 1.2x0.9 m |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | SIG Coverall 1.2x1.8 m |
| 1 x | Propeller balancer |
| 2 x | Propeller balancer |
| 2 x | 12 mm dogdrive props |
| 2 x | Angle of incidence meter |
| 1 x | 29,0 mm propeller (left propeller) |
| 1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | 42,0 mm propeller (left propeller) |
| 1 x | 33,0 mm propeller (rigth propeller) |
| 1 x | Field folding model stand SebArt |
| 1 x | 290 mm 290 mm M5x18 mm shaft ship |
| 1 x | 12 mm mast holder |
| 1 x | 300x4 mm M4 shaft ship |
| 1 x | 270 mm 3/3 mm shaft ship |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Slider Extenion for CORE |
| 1 x | Servo NARO Max Std |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Hovercraft sailcloth |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | 65 mm mini servo cover |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | 20x200 mm battery rings |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | 1000 cc gasoline fuel tank complet |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | 18m Fitting barb |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
| 1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
| 2 x | Bungee HLG Premium |
| 1 x | Emisora JETI Duplex DS-16 II BLACK Multimode |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | 58 mm micro servo cover |
| 1 x | 90x60 mm standart servo cover |
| 1 x | Motor OS 55 AX |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | OS 37 SZ-H, Crankshaft |
| 1 x | Motor OS 3805-1200 electric |
| 1 x | Xplorer4 anemometro |
| 1 x | Motor OS FS 95 AX |
| 1 x | Motor OS MAX 160 AX |
| 1 x | OS Engine 105HZ-R Heli with pipe 105 |
| 1 x | Captador OS GT 33 cc |
| 1 x | Motor OS MAX 65 AX (incl. muffler) |
| 1 x | Bujia OS G5 gasolina |
| 1 x | 30 cm DEANS female connector |
| 1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
| 1 x | 14 mm Portholes for screws (10 pcs) |
| 1 x | Prop Holder AXI 41xx V2 |
| 1 x | Escalera gris 12x60 mm |
| 1 x | Life guard Ø 25,0 mm (2 pcs) |
| 1 x | 290 mm M5 Prop shaft |
| 1 x | Coupling for 5 mm axis |
| 1 x | Coupling for 3,2 mm axis |
| 1 x | Clamping slide 14mm (10 pcs) plastic |
| 1 x | Repair set for RAB0108-31 |
| 1 x | Ringöse 12 mm (50 pcs) |
| 1 x | Marco de medición doble 35 mm (2 pcs) |
| 1 x | Red position light 3V 7x2 mm (2 pcs) |
| 1 x | PVC grid straight 290x185x0.32 mm |
| 1 x | Angle support XT60 conector |
| 1 x | LED wire (white - 2pcs) |
| 1 x | LED blink wire flashing (orange - 2pcs) |
| 1 x | LED blink wire flashing (blue - 2pcs) |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Xoar Electric Beechwood Prop 21x10 |
| 1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
| 1 x | Propeller POWER-PROP 13x10 |
| 1 x | Housing Ø 6 mm (20 pcs) |
| 1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
| 1 x | Propeller electric carbon 7x7 |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Capstan of plastic 88x30x36 mm |
| 1 x | 40,0 mm hydro-propeller (left hydropropeller) |
| 1 x | Chigre de amarre Scale 1:32 |
| 1 x | Extension silicon 25 cm (Futaba) |
| 1 x | 33,0 mm propeller (left propeller) |
| 1 x | Mounting base Ms 12 mm |
| 1 x | DUPLEX 2.4EX MUI 150 Sensor |
| 1 x | Coupling for 6 mm axis |
| 1 x | Support pump Xicoy X45 |
| 1 x | Soporte barandilla madera 10 mm (10 pcs) |
| 1 x | Cornamusa 8 mm plastico (10 pcs) |
| 1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
| 1 x | 10 mm dogdrive props |
| 1 x | Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück |
| 1 x | Propeller RABOESCH.Ms 70L (5 Blades) (Left hydropropeller) |
| 1 x | Lancha salvavidas Kutter .Ösen 43 mm (5 pcs) |
| 1 x | COMPACT drive 26/45-20 DL=175 motor |
| 1 x | Koffeenagel Holz hell 8 mm (20 pcs) |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
| 1 x | 110x55 mm C SLH KOVO wheel |
| 1 x | 22m Fitting barb |
| 1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
| 1 x | 100x50 mm SLH KOVO wheel |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | 160 mm carbon undercarriage (2pcs) |
 |
| 19,021.65EUR |
