| 4 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 3 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 3 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 3 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 4 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | CA Glue fast 20g |
| 1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 2 x | Buy Perforated film 145 cm / 50 m |
| 4 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 2 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
| 3 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 2 x | Glass fibre sleeve Ø 20 mm X 10m |
| 2 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 2 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 3 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 3 x | Universal Colour Paste deep black 50 g |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | Release wax 250ml |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Film release agent PVA 25 ml |
| 2 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Canopy Latch |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Field folding model stand |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | PIX Hawk with accesories |
| 2 x | Blue smoke canister 140 g |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | AX-60 starters (5 pcs) |
| 2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 3 x | 1/4 Pilot "Heidi" |
| 2 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Parachute expulsion foam |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 3 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | White smoke canister 140 g |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | White smoke canister 65 g |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 2 x | Glases Flitemaster |
| 3 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | |
| 1 x | Cable set PREMIUM , fuselage/wing one4one |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | 6 mm aluminium horn with patella |
| 2 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | 6 mm M3 variable horn |
| 1 x | Optical RPM Sensor |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | |
| 1 x | Cable set PREMIUM, fuselage/wing |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
| 2 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
| 1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Motor DLE 430 cc - Paramotors |
| 3 x | Motor DLE 170 M- Paramotors |
| 1 x | Motor DLE 200cc Std |
| 1 x | Silent-blocks DLE 170M |
| 1 x | |
| 1 x | CA Glue (medium) 20g |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Release film 100 cm x 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 2 x | 25 mm carbon servo arm |
| 1 x | 18m Fitting barb |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | 20x200 mm battery rings |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | 22m Fitting barb |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Propeller Pleg CAM Carbon 15x8 |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 2 x | 102 mm aluminium spinner |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | |
| 1 x | 1/10 Pilot "Jimmy" |
| 2 x | 110x55 mm C SLH KOVO wheel |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | 1/6 Pilot "Buddy" |
| 2 x | Carbon plate 350x150x1.0 mm |
| 2 x | 1000 cc gasoline fuel tank complet |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 2 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | 1/6 Pilot "John" |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | 10 mm gas motor standoff |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
| 2 x | 1/12 Pilot "Langley" |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Silicone black 1,0 qmm wire (100 m) |
| 1 x | Silicone black 6,0 qmm wire (25 m) |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 2 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | 5 mm M2 variable inclined horn |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | Ball Bearing Oil 25 ml |
| 1 x | Extra long horn 60x30 |
| 1 x | Servo holder for retract |
| 1 x | 20-25mm Servo Arm |
| 1 x | 10-15mm Servo Arm |
| 1 x | KAVAN CA Activator 150ml |
| 1 x | Telemetry interface ALTIS 12 cm |
| 1 x | Spinner 40 mm Black (Kavan) |
| 1 x | KAVAN Hand crank fuel pump |
| 1 x | 10 mm aluminium spinner (Kavan) |
| 2 x | Telemetry interface ALTIS 6 cm |
| 1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Ciano KAVAN Medium 20g |
| 1 x | Altimeter Altis NAO |
| 1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
| 1 x | Stickers-digit for marking |
| 1 x | Motor A50-12 L V4 |
| 1 x | Motor A200-8 |
| 1 x | PT 20x13 EL Propeller |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | XPower XC5030/14 LS |
| 1 x | Motor 2212 (1000KV) Quadcopter F450 |
| 1 x | KIRA 480-34 5,2:1 |
| 1 x | KIRA 480-43 |
| 1 x | KONDOR 15-92 |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | Axi for MVVS 3.5 Sport |
| 1 x | A60-6XS V4 28-Pole |
| 1 x | PT 21x13 EL Propeller 3 Blade |
| 2 x | PT 22x10 EL Propeller |
| 1 x | PT 21x13 EL Propeller |
| 1 x | PT 16x10 E Propeller |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | 90x45 mm hard foam KOVO wheel |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Arnes cruzado Confort de Luxe PROFI |
| 1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
| 1 x | Cable set Premium™ MAXI "one4two" |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | LightBox SR |
| 1 x | 30 cm DEANS female connector |
| 1 x | COPILOT Multiplex |
| 1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | 75 mm INO spinner (carbon imitation) |
| 1 x | 460 mm EPP Floats |
| 1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
| 1 x | MZ-18, 9 Channel HoTT |
| 1 x | MZ-12, 6 Channel HoTT |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Covered closure or fairings |
| 1 x | Piston ring for DA-60 and DA-120 |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Piston ring for DA-50R and DA-100 |
| 1 x | Spare white 36-38 mm spinner |
| 1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
| 1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
| 1 x | Z Spinner (CN) 40mm |
| 1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 1 x | 20 mm carbon horn |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
| 1 x | Transmitter Balancer Futaba T-10CG |
| 1 x | Potenciometro micro |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | External LED's (2 pcs) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Blind nut M8 (10 pcs) |
| 1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | 38 mm aluminium spinner. |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
| 1 x | Micro control horn T2 Ø 1 |
| 1 x | Cylinder for ZG20 |
| 1 x | Spring Clip Ø25 mm |
| 1 x | Cylinder ZG 26SC/SLH |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Piston ring for ZG 20 and G240RC |
| 1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
| 1 x | Pick up DA50/100/150 |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Green smoke canister 100 g |
| 1 x | Spinner propeller pleg. 38 mm / 5 mm |
| 1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
| 1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
| 1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
| 1 x | Green smoke canister 65 g |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
| 1 x | Spinner fold propeller 36 mm (white spare spinner) |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Green smoke canister 140 g |
| 1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
| 1 x | Z Spinner (CN) 30mm |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
| 1 x | Spinner propeller pleg. 45 mm / 4 mm |
| 1 x | Z Spinner (CN) 32mm |
| 1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
| 1 x | Z Spinner (CN) 38mm |
| 1 x | Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
| 1 x | Turbo light spinner cap white 32mm |
| 1 x | 100x50 mm SLH KOVO wheel |
| 1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
| 1 x | 80x40 mm hard foam KOVO wheel |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 1 x | 127x43 Ø6.0 mm aluminium core wheel |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | 89 mm INO spinner (carbon imitation) |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | Cockpit plastic closing |
| 1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 1 x | 82 mm aluminium spinner. |
| 1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | 90 mm CFK long Spinner fixed by a central screw |
 |
| 31,118.33EUR |
