| 1 x | Hovercraft sailcloth |
| 1 x | |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Opale Rucksack |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Oracover Black 10 m |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Oracover White 2 m |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Small Crow DLE-170M |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 2 x | |
| 1 x | Vasa model Catapult |
| 1 x | Oracover Green10 m |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Paint gun for sprays |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 2 x | Universal Colour Paste white 50 g |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Partall paste 650 g |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Oracover Verde 2 m |
| 1 x | Optotronix Aurora Plug |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Glases Nimbus |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | Canopy Latch |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | Oracover Brown 2 m |
| 1 x | Stickers-digit for marking |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Motor DLE 200cc Std |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Glases Innovation Plus |
| 2 x | Universal Colour Paste deep black 250 g |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Ply-Span 450x600/13g Yellow |
| 1 x | Glases Aspen |
| 1 x | Tow hook for tug |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Release wax 250ml |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Covered closure or fairings |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 2 x | 20 mm carbon horn |
| 1 x | Jeti Black cap |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Blocking screws M6 gas engine |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Spring Clip Ø25 mm |
| 1 x | Compact Pitts Muffler OS MAX.35.40 FP |
| 1 x | Junta humo metalica G35 DLE35 |
| 1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
| 1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Nitroverdu 500 ml |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Spray EC Red 400ml |
| 1 x | Bungee HLG Premium |
| 1 x | SSPS105 Super Hi-Power servo |
| 1 x | Spannlack 1000 ml |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Connectors MPX male |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Field folding model stand SebArt |
| 1 x | Servo KST X08 Plus 9g HV servo |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
| 1 x | Carburetor DLE 170 |
| 1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Conector XT-30 (hembra) |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Katana Mini carbon wheel pants (2 pcs) |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Connectors MPX black female |
| 1 x | Red aluminium servo arm V3-Futaba 1,0inch |
| 1 x | Field folding model stand |
| 1 x | Connectors MPX male (PIN double) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | XH female balance (9S) connector (2 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 2 x | Angle of incidence meter |
| 1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | 30 cm MULTIPLEX female connector |
| 1 x | Connectors DEANS (T) micro |
| 1 x | MR30 connector female |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | XH male balance (9S) connector (2 pcs) |
| 1 x | Servo Mount M (blue) |
| 1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 1 x | 140 mm rods set for direction control |
| 1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | Propeller balancer |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | Soporte servo KST X08/H and Plus |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
| 1 x | Cable with accesories |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Canister combo DLE 120 cc |
| 1 x | Muffler DLE 20 |
| 1 x | DLE 85 Ignition unit |
| 1 x | Retract undercarriage for gliders up to 2 Kg |
| 1 x | Muffler DLE 20-RA |
| 1 x | Piston ring for DLE-20 |
| 1 x | Piston ring for DLE-20 RA |
| 1 x | Horn with ball 40x30 |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Servo GO-02 Digital 1.8g |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Servo GO-09 9g |
| 1 x | Big Crow DLE-170M |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
 |
| 12,921.67EUR |
