| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | Tape GFK 50 mm |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Marker ties (20 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 2 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Steering arm 16 mm Ø 4 mm |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Canopy Latch |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Cockpit plastic closing |
| 3 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 3 x | Stickers-digit for marking |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 2 x | Gates hinge |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | |
| 1 x | Piloto jet 130 mm |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | PowerBox PIONEER incl. microSwitch |
| 1 x | Spikes Band (5 m) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | 15 mm gas motor standoff |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | 20 mm gas motor standoff |
| 2 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 2 x | Allen wheel collar M4x6 |
| 1 x | 140 mm rods set for direction control |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 2 x | DUPLEX 2.4EX Central Box 220 |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Blades 330mm |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Covered closure or fairings |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
| 2 x | 3 mm Long Prop Adapter M5 |
| 2 x | Threaded coupler M2 (10 uds) |
| 1 x | One touch canopy lock |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
| 1 x | XTorque CFK Servohebel 38 HITEC 25T |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 2 x | Adapter 3,0 mm M8 |
| 2 x | Adapter 5,0 mm M8 |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
| 1 x | DUPLEX 2.4EX Central Box 320 |
| 2 x | GPS Sensor + Logger OPTronics |
| 1 x | Hitec 52 mm servo arm |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
| 1 x | Servo BLUE Bird BLS-H71B v2 |
| 1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Metal gear set for HS81MG/5082MG |
| 1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
| 1 x | Motor A50-14 L 8-Polos Electric turbine |
| 1 x | Mobile Terminal |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
| 1 x | MIG 29 3D RTF, Servo |
| 1 x | Servo Mount S (red) |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
| 1 x | Bungee HLG Premium |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | PowerBox Evo |
| 1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
| 1 x | PowerBox iGyro 1e |
| 1 x | PowerBox Champion SRS |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | DH82 Tiger Moth ARC Scale 1:3.3 |
| 1 x | LS-8 GFK 6m Glider |
| 1 x | Ø 38 mm fiberglass motor-holder for electric motors |
| 1 x | LO 100 ARC 3.3m,cabina |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Motor UMS Radial-7-35cc glow |
| 1 x | Glow filter |
| 1 x | LO 100 ARC 3.3m |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Mini DART 2 F3K carbon light 1m Green |
| 1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | DLA 116 crankshaft |
| 1 x | Junta humo metalica G30 (DLE30/DLE60) |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | DLE 111 pipe plug |
| 1 x | Sparkplug 1/4-32 |
| 1 x | NF-3m Heli Kit |
| 1 x | Chili Race F3K (aramid nose) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | 12 mm dogdrive props |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Propadapter for motor A50-V3 |
| 1 x | EME 55 cc carburetor WALBRO |
| 1 x | Sparkplug ROSSI R8 |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Chili F3K 2 wing servo mounted |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | X-RAY Micro QR (Rudder) |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
 |
| 13,079.33EUR |
