| 2 x | Tube Pitot to PIXHAWK |
| 1 x | PIX Hawk with accesories |
| 2 x | PPM Encoder Module |
| 2 x | Digital Air Speed Sensor And Pitot Tube Set |
| 3 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 4 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 3 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 2 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 2 x | Long pinned hinge (12 uds) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 25 mm reinforced hinge |
| 2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Small pinned hinge (12 uds) |
| 2 x | 15 mm reinforced hinge |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 3 x | Large flex hinge (12 uds) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Connector CAN 15 |
| 2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | M2 5Diam black ball link V2 (2 pcs) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Support Filtro FESTO |
| 2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 2 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | SUS wire 3m (nylon coated) |
| 2 x | Wheel collar 6 mm Ø (4 uds) |
| 3 x | Allen wheel collar M4x4 |
| 2 x | 45 mm rods set for direction control |
| 1 x | Angle support XT60 conector |
| 3 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 2 x | 18 mm reinforced hinge |
| 3 x | Small flex hinge (12 uds) |
| 1 x | Spark plug key NGK MVVS |
| 2 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 2 x | Miniature brass strap hinge, 1 m |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Sparkplug NGK CM6 |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Sparkplug 1/4-32 EVO 10GX |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Spark motor OS nº 3 |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Hot Glue Stick RED |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
| 1 x | DLA 116 crankshaft |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 2 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Fuel tank 500ml (17oz) |
| 1 x | T- Fittings blue color (2pcs) |
| 2 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Short ball link M2 (6 uds) |
| 1 x | Long ball link M3 (6 uds) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 2 x | |
| 1 x | 12 mm dogdrive props |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Allen wheel collar M4x6 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | 2,3 mm Prop Adapter M5 |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Adapter 3,0 mm M6 |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Adapter 3,2 mm M8 |
| 2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
| 2 x | Allen wheel collar M3x3 |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 4 x | Adapter 5,0 mm M8 |
| 1 x | Adapter 3,2 mm M6 |
| 1 x | 10 mm dogdrive props |
| 1 x | |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Sparkplug 1/4-32 |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Blue "FUEL VENT" round aluminum overflow socket |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 1 x | Air Trap Mounting - 175ml |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | double Fuel Dot V2 (silver) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Ball Link Plier |
| 1 x | Baseplate servo |
| 1 x | Wheel 38 mm V2 |
| 1 x | 76x23 Ø3.5 mm aluminium core wheel |
| 1 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | Wheel 22 mm |
| 1 x | Wheel FEMA 100 mm / 6 mm |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Deposito DUBRO 1800cc-60oz |
| 1 x | Check valve V2 |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | Bags wings/rudder ODYSSEY |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Nylon gear block Ø 3 mm (2 uds) |
| 1 x | Blind nut M4 (4 pcs) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | TX 250 mW especial GOPRO |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Spinner NUT M10x1 |
| 1 x | Adapter 3,0 mm M8 |
| 1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
| 1 x | Nut for mounting M5 (4 pcs) |
| 2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 2 x | 2 mm Prop Adapter M5 |
| 1 x | Nylon gear block Ø 4 mm (2 uds) |
| 2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Spinner NUT M5 |
| 1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Nylon threaded block M6 (2 uds) |
| 1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
| 1 x | Pan Head Screw M2x8 PH |
| 1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | Nylon threaded block M4 (2 uds) |
| 1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
| 1 x | 3,2 mm Prop Adapter M5 |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Nylon threaded block M5 (2 uds) |
| 1 x | Pan head screw M2x16 PH |
 |
| 2,498.61EUR |
